MW-3601 SR - Air purifier Maxwell - Free user manual and instructions

Product Type	Air Purifier with Ionizer
Brand	Maxwell
Model	MW-3601 SR
Power Supply	220-240 V, 50 Hz
Power Consumption	2 W
Ozone Output	Less than 0.05 ppm
Coverage Area	Up to 10 m²
Airflow Capacity	3 m³/h
Noise Level	Silent (no noise during operation)
Filter Type	Electrostatic filter (washable)
Filter Replacement	Not required (clean periodically)
Ionizer	Yes (ion breeze technology, produces negative ions)
LED Indicator	Yes (unit operation indicator)
Cord Length	Approximately 1.5 m
Weight	Approximately 1.0 kg
Dimensions (W x H x D)	Approximately 200 x 200 x 150 mm
Material	Plastic (ABS)
Service Life	3 years
Usage	Indoor household use only
Safety Features	Automatic shut-off if filter not installed; do not use in wet areas
Cleaning	Wipe body with damp cloth; clean electrostatic filter plates weekly
Certifications	CE, Low Voltage Directive (73/23/EEC)

Frequently Asked Questions - MW-3601 SR Maxwell

How does the air purifier work?

The MW-3601 SR uses ion breeze technology to produce negative ions and a small amount of ozone. These ions kill bacteria and remove odors, while the electrostatic filter traps dust and other particles.

Does the air purifier produce ozone?

Yes, a small amount of ozone (less than 0.05 ppm) is generated. This helps kill bacteria and remove odors, but it is safe for normal use.

Is the air purifier noisy?

No, the unit operates silently. It has no moving parts, so it produces no noise during operation.

How often should I clean the electrostatic filter?

It is recommended to clean the filter plates once a week. First, unplug the unit, remove the filter, discharge static electricity by touching the plates to a grounded object, then wipe with a slightly damp cloth and dry completely before reinstalling.

Do I need to replace the filter?

No, the electrostatic filter is washable and reusable. There is no need to purchase replacement filters.

What is the power consumption?

The air purifier consumes only 2 watts, making it very energy-efficient.

What is the coverage area?

The unit is designed for rooms up to 10 m², such as small bedrooms, studies, or pantries.

How do I clean the unit body?

Wipe the body with a damp cloth and then dry it. Do not immerse the unit in water or use abrasive cleaners.

Why is the unit not working?

Check that the plug is properly inserted and the socket has power. Ensure the electrostatic filter is installed correctly. If the problem persists, contact an authorized service center.

Is it safe to use the purifier in a bathroom?

No, do not use the unit in high-humidity areas like bathrooms. It is intended for dry indoor use only.

USER MANUAL MW-3601 SR Maxwell

РУССКИЙ

1. Electrostatic field

2. Air grate

3. Unit operating indicator (mood lighting)

4. Pio

Characteris

- Such rooms as pantry, kitchen, study, corridor, LLC usually have closed air volume, which contributes to growth of the harboria number, which are the source of unpleasant odor. The air purifier gas

Close to grow in the distance between home and the air in operation from the air, but not to solve this problem and fill the room with clean air.

- To remove unpleasant odors and kill bacteria, the unit uses the technology of ion breeze. During the unit operating, paraflex ions and ozone (P) are formed, which kill bacteria, and the electrostatic

and (solarized) negative fields in soil is (g^-1) as a finite layer with no surface) and the other surfaces filter catches finest particles of dust, pollen and fungus spores.

- The air purifier does not produce any noise during its operation. Its is a unit with low energy consumption (2.60) and does not require changing the filter details.

– The light-emitting diode indicator ensures local lighting.

– The plug is on the body of the unit.

SAFETY MEASURES

To reduce the risk of injuries, fire or electric shock, when operating the unit, it is necessary to follow the risks on safety rules, including the following:

- Before switching the unit on read this instruction carefully.

• Before first usage make sure that your home electricity gas specified on the housing.

+ Never insert the plug into defective or worn-out outlets

- Never leave the operating unit unattended. - Do not use the unit outdoors.

- DO NOT USE THIS UNIT OBSOORS. - Do not use the unit in rooms with high humidity, for example, in bathrooms.

- Never touch the unit body with wet hands.

- Do not use the unit, near heating elements. - Do not use the unit. In places where aerosols or Inflammable liquids are used.

Do not close the air grade and do not insert any objects into it.

- Polyethylene bags, used as packaging, can be dangerous away from babies and children. Such plastic bag is not a box

- Never allow children to use the unit as a toy. Close attention is necessary when children or disabled

• This unit is not intended for usage by children or disabled persons. This unit is not intended for

usage by children or dissabled persons unless they are given all the necessary instructions on safety measures and information about diseases, which can be proved by impressive means of the unit.

- Measures and information about danger, which can be caused by improper usage of the unit. - Do not switch on and do not use the unit if its works irregularly, tell or is damaged. Apply to an

authorized service center for testing and repair of the unit.

- Before cleaning the air filter, pull the plug-out of the socket - The air purifier is intended for household usage only.

POSTERS BY

SWITCHING ON - Before contact

– Before connecting the unit to the Hains, make sure that the operating voltage of the unit corresponds to the voltage of the electric network of your house.

- Insert the plug (4) into the socket, the unit operating indicator will light up [3].

- The air planner can operate for a long time, but it is necessary to follow basic salary rates applied when using any electric unit; always uplug the unit when it is not used.

(1)

- If the electrostatic filter (1) is not installed or is installed incorrectly, the unit will not turn on.

- Slight crackling during the unit operation is related to atmosphere relative humidity in the room, it

B. formal

CLEANING THE UNIT

Body Wing the unit's body with a clamping cloth and then opening the

- Worse the thin's body with a clamp closer and then wipe it. - Never immerse the unit into water or other liquids.

- Do not use abrasive cleaners and solvents for cleaning the unit body.

Cleaning the electrostatic filter [1]

It is recommended to clean the plates of the electrostatic filter (1) once a week. Take the pie out of the socket.

- Take the plug out of the bucket. - Take the electrostatic filter (1) out

electrostatic charge. To make this touch the plates with any earthed object, for example, to the

- Wipe the plates with a slightly wet cloth to remove the dust particles, dry the electrostatic filter for

some time. Before installing make sure that the plates of the electrostatic filter are absolutely dry.

- Set the electrostatic field (1) in its place.

TROUBLESHOOTIN

Failure	Possible causes	Solution
The unit does not switch on.	1. The unit is not plugged in the socket.2. No voltage in the socket.3. The electrostatic filter is not installed or is installed not firmly.4. Unit failure.	1. Connect the unit to the socket.2. Try to connect another unit to the same socket.3. Check whether the electrostatic filter is firmly installed.4. Apply to the authorized service center for unit repairs.

Technical specifications

1. Power supply: 220-240 V - 50 Hz.

2. Power consumption: 2 W.

3. Ozone output: less than 0.05% ppm.

4. Applicable area up to 10 m²

5. Working capacity: 3 m³/hour.

The manufacture preserves the right to change the specifications of the unit without a preliminary

notification.

Service life of the unit is 3 years

[Non-Text]

Guarantee

Details regarding guarantee conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be reproduced upon making any claim under the terms of this

guarantee.

This product conforms to the EMC-Recurements as laid down by the Council Directive.

89/396/EEC and to the Low Voltage Regulation (73/23 EEC)

CE

[Non-Text]

DEUTSCH

LIETREINIGER NETIONISATOR

SOFTREIMUSER INT. LOWIDATOR

Beschreibung

1. The following table provides the contents of the company:

2.1.1.2.2.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20.21.22.23.24.25.26.27.28.29.30.31.32.33.34.35.36.37.38.39.40.41.42.43.44.45.46.47.48.49.50.51.52.53.54.55.56.57.58.59.60.61.62.63.64.65.66.67.68.69.70.71.72.73.74.75.76.77.78.79.80.81.82.83.84.85.86.87.88.89.90.91.92.93.94.95.96.97.98.99.100

5bor *Institute of the school office, University, and other facilities for a student

Step 3. The results of the model: “The Model (y) is a positive predictor.”

ЗАХОДИ ВЕЗПЕКИ

Notes: The following person (2):

KWL ASH TUBUWATI ARLWAND TOTAL ASCH

IONEASH XOSOTA/DAIR/MAFO TOLADASION

bunday bo'ishi tabily.

JHOUZNI TOZALASH

Korpusi

- Jihoz korpusini bir oz nam malo bilan arting, shundan keyin quniguncha artib oling.

- Şirozni kovga jede bisiņa kdyapikda tokšn ta cijamalot - Jihoz korpusini tozalash uchun girib tozalavdigan voslal

DilicateSH shuJayinsh (H)

Elektroszek fili ir szalasi (1) Elektrosztok filr (1) ploszlinalarini

- Elektr vilkasini rozetkadan chiçarib oling.

- Dastagidan ushlab elektrostatik filtmi (1) chiqarib oling. Qolgan statik quvatten

Mekabriagončia pastralanga qot knozming. Törning džkun pastartami yirga tizlagan jetaligen buvumuza, misol uchun suv ouvuriga voki jo'mrakka tekkizino.

- Changini keikazish uchun plastinalarini nam malo bilan arting; elektrostatik filtmi