LED Partybar V2 - Appareil d'effets Kam - Free user manual and instructions
Find the device manual for free LED Partybar V2 Kam in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | LED Party Bar Effect Light |
| Model | LED Partybar V2 |
| Brand | Kam |
| Power Consumption | 30W |
| Power Supply | AC 100-240V, 50/60Hz |
| LED Type | RGB LEDs |
| Number of LEDs | 36 (12 red, 12 green, 12 blue) |
| Beam Angle | 120° |
| Control Modes | Auto, Sound Active, DMX512 |
| DMX Channels | 3/7 channel |
| Dimensions (L x W x H) | 1000 x 100 x 200 mm |
| Weight | 2.0 kg |
| Housing Material | Aluminum & Plastic |
| Mounting | Floor stand or hanging bracket |
| Cooling | Passive |
| IP Rating | IP20 (indoor use only) |
| Operating Temperature | 0°C to 40°C |
| Accessories Included | Power cord, user manual, mounting bracket |
| Safety | CE, RoHS compliant |
| Maintenance | Clean with soft dry cloth; avoid moisture |
Frequently Asked Questions - LED Partybar V2 Kam
How do I connect the LED Partybar V2 to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX input of the fixture to your controller. Set the DMX address using the dip switches or menu. Refer to the user manual for addressing.
Can I use this light outdoors?
No, the LED Partybar V2 is rated IP20 and designed for indoor use only. Exposure to rain or moisture may cause damage.
How many DMX channels does it use?
The fixture operates in 3-channel or 7-channel mode. In 3-channel mode you control red, green, blue. In 7-channel mode you get additional dimmer, strobe, and macro functions.
What is the maximum power consumption?
The maximum power consumption is approximately 30W. Always use a power supply that matches the specified voltage (100-240V AC).
How do I clean the fixture?
Disconnect from power before cleaning. Use a soft, dry cloth to gently wipe the surface. Do not use abrasive cleaners or solvents.
Can I replace the LEDs?
The LEDs are not user-replaceable. If an LED fails, contact Kam customer service or an authorized technician for repair.
Does it have a sound-activated mode?
Yes, the LED Partybar V2 features a built-in microphone for sound activation. The light will change colors and patterns in response to music.
What is the beam angle?
The beam angle is approximately 120 degrees, providing a wide wash of light for stage or party effects.
Can I link multiple units together?
Yes, you can link multiple fixtures using DMX daisy chain. Up to 32 units can be connected in series using 3-pin XLR cables.
Where can I download the user manual?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version.
User questions about LED Partybar V2 Kam
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Appareil d'effets in PDF format for free! Find your manual LED Partybar V2 - Kam and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED Partybar V2 by Kam.