VT-2310 BW - Styler Vitek - Free user manual and instructions

Product Type	Hair Straightener
Brand	Vitek
Model	VT-2310 BW
Plate Material	Ceramic
Plate Size	Approx. 2.5 x 9 cm
Overall Length	Approx. 28 cm
Weight	Approx. 300 g
Power Supply	220-240 V ~ 50/60 Hz
Power Consumption	45 W
Temperature Range	150°C to 230°C
Temperature Control	Adjustable knob
Heating Indicator	Red (heating) / Green (ready)
Power Switch	On/Off (1/0)
Lock Mechanism	Yes, for storage
Cable Length	Approx. 1.8 m
Swivel Cord	No
Auto Shut-Off	No
Heat-Up Time	Approx. 30 seconds
Maintenance	Unplug and wipe with damp cloth
Safety Features	Do not use near water; recommended RCD installation
Repairability	Not user-serviceable; no spare parts available
Warranty	2 years (typical)

Frequently Asked Questions - VT-2310 BW Vitek

How do I turn on the Vitek VT-2310 BW hair straightener?

Set the power switch (5) to the '1' position. The ON/OFF indicator (4) will light up red, indicating the unit is heating.

What temperature should I use for my hair type?

For fine hair, use 150-170°C. For normal/wavy hair, use 170-190°C. For thick/curly hair, use 190-230°C. Adjust using the temperature control knob (3).

How do I know when the straightener is ready?

When the heating plates reach the set temperature, the indicator light (4) changes from red to green.

Can I use the straightener on wet hair?

No, never use on wet hair. Hair should be dry before straightening to avoid damage and ensure safety.

How do I clean the straightener?

Unplug the unit and let it cool completely. Wipe the heating plates and body with a damp cloth. Do not use abrasive cleaners.

What does the lock button do?

The lock (6) secures the heating plates (1) together for safe storage. Slide it to unlock before use.

Is the straightener safe to use in the bathroom?

Use with caution. Do not use near water (sink, bath). Unplug immediately after use. For extra safety, install a residual current device (RCD) in the bathroom.

Why does my straightener produce a strange smell when first used?

A foreign smell is normal during first use as components burn off. It will dissipate after a few uses.

How long does it take to heat up?

The heating plates reach the set temperature quickly, typically within 30 seconds. However, they cool down slowly.

Can I repair the straightener if it breaks?

The unit is not user-serviceable and no spare parts are available. Contact authorized service for possible repairs.

USER MANUAL VT-2310 BW Vitek

ENGLISH
Hair Straightener	- Before connecting the unit to the name, make sure that unit operating voltage and power range will be used for a work voltage.
Description
1. Heating plates
2. Power switch
3. Temperature control knob
4. Power switch (with cooling element)
5. Power switch-UO
6. Power switch-UO-E
7. Power switch-UO-L
ATTENTION: Do not use the unit rear containers filled with water (such as sink, drain, or exhaust).
When using the unit in a bathroom, it is necessary to ensure that the plug out of the socket, at water is necessary to be necessary. The unit is switched off.
When using the unit in a bathroom, it is necessary to ensure that the plug out of the socket, at water is necessary to be necessary. The unit is switched off.
After using the unit in a bathroom, it is necessary to ensure that the plug out of the socket, at water is necessary to be necessary. The unit is switched off.
Safety: Lighting, tool, and thermal current device with nominal curviness. During the time of the lighting, the unit can be used to the main parts of the bathroom; contact equipment for installation.	Hair type and Temperature
	Hair type and Temperature
	Fine hair, sensitive to 150°C to 190°C
	Hair color, sensitive to 150°C to 190°C
	Normal, grey hair of medium thickness
	Hot spring, curly from 190°C to 230°C
Safety: Lighting, tool, and thermal current device with nominal curviness. During the time of the lighting, the unit can be used to the main parts of the bathroom; contact equipment for installation.	Note: Setting the temperature remember when the unit has been found but their cooling takes a longer period of time. Once the unit is connected to a lower temperature, the indicator (4) will get light. When changing the switch (2) is the indicator (4) will get light.
	Note: Setting the temperature remember when the unit has been found but their cooling takes a longer period of time. Once the unit is connected to a lower temperature, the indicator (4) will get light.
Safety: Lighting, tool, and thermal current device with nominal curviness. During the time of the lighting, the unit can be used to the main parts of the bathroom; contact equipment for installation.	Note: Setting the temperature remember when the unit has been found but their cooling takes a longer period of time. Once the unit is connected to a lower temperature, the indicator (4) will get light.
	Note: Setting the temperature remember when the unit has been found but their cooling takes a longer period of time. Once the unit is connected to a lower temperature, the indicator (4) will get light.
Before switching the unit on make sure that the electrical network corresponds to unit operating voltage, and the unit is connected to a lower temperature. Use the unit and intended purposes only. During the time of the lighting, the unit can be used to the main parts of the bathroom; contact equipment for installation.	Hair straightening
	- Divide the hair into lock without better than 1 pc.
	- Place a hair lock between plates (1) and 20 cm.
	- Place a hair lock between plates (2) and 30 cm.
	- Close the unit with handle area only (2), do not use the main part, body wedges, heating plates (1)
	- Mail about the main part, body wedges, heating plates (1)
Before switching the unit on in places where aerosols or highly influenced liquids are open.	- Repeat the procedure 88 yin fresh.
Hair sensory should be applied only after opening the unit.	- Repeat the procedure 88 yin fresh.
Always unplug the unit immediately after opening the unit.	- Repeat the procedure 88 yin fresh.
When unpluging the unit, pull the plug.	- After finishing the procedure of a hair straightening through the unit, put down the unit and wait full.
Do not touch the power plug with wet water.	- Keep the plate (1) together and push the lock (to its then).
Do not place or keep the unit in places with wet water into a bath or bath with water; do not immeate the unit body.	- Clearing and CARE
Do not use the unit while bathing.	- See the step of the hand and let the lock down completely.
Do not use the unit while soap, upping it immediately. And only then you can use the unit.	- Do not use the unit, body power and power plug of the unit into water or water.
For children safety do not leave polyethylene and water, and do not use the unit.	- Wear the outer surface of the body and does not use the other air.
Without water safety, do not allow polyethylene and water, and do not use the unit to allow polyethylene bags or film.	- See the use of adhesives and solvents to the lock.
Children and idealised people can use water safety.	STORAGE
This unit is not intended for usage by the wall and floor.	- Let the unit clean down completely and take it down in the room.
As and does the units are necessary to use the unit to use the wall and floor.	- Do not use the unit, body power and power plug of the unit into water or water.
Safety and safety on safety measures and information. During the time of the lighting, the unit can be used to any improvement of the unit.	- Wear the outer surface of the body and does not use the other air.
Do not use the unit to use polyethylene and water.	- See the use away from children in a dry coat place.
Do not use the unit to straight-line wet water.	-
Take the unit by handle only. Do not use the unit to use polyethylene bags or film.	- DELIVERY SET
Children and idealised people can use water safety.	- Use the unit to use more than 1 pc.
This unit is not intended for usage by the wall and floor.	- Use the unit to use more than 1 pc.
Avoid contact of no surfaces with your head.	-
Avoid contact of no surfaces with your head.	-
Do not use the unit operating on the heads of surfaces (bed or sofa) and do not cover it.	-
Do not use the unit to use all surfaces with your head.	-
Body and body safety measures and information. During the time of the lighting, the unit can be used to any time after unplugting the unit.	- Technical SPECIFICATIONS
Do not use the unit to use all surfaces with your head and do not turn out.	- Power supply (220V ~ 50kW) and 50W
Do not use the unit to use all surfaces with your head and do not turn out.	The manufacturer preserves the right to change the specifications of the unit with an electric motor.
- Touch objects, etc.
- Be used for carrying the unit.	Guarantee
- Use the unit to use the unit with one side periodically.	Details regarding guarantee conditions can be used to determine the product's performance was purchased.
- Use the unit to use the unit with the power cord or the plug is damaged, the unit works well and the power cord is damaged.	- Set the bill or sale or repressing any claim under the terms of this guarantee.
Contact the authorized service center.	-
THE UNIT IS INTENDED FOR HOUSEHOLD USAGE ONLY	Guarantee
Instruction manual
Use the unit to use the unit with one side periodically or storage of air temperature if to necessary to be necessary.	- Current Measure for the EMC (8/8/306E and EC) and - Current Measure for the U-tau Regulation (Regulation 17/23/ECE)
Use the unit to use the unit before entering and curing and used the power cord completely.	-