Vitek VT-1335 VT - Styler

VT-1335 VT - Styler Vitek - Free user manual and instructions

Find the device manual for free VT-1335 VT Vitek in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vitek VT-1335 VT - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Hair Straightener / Styler
Brand Vitek
Model VT-1335 VT
Power Supply 220-240 V ~ 50 Hz
Power Consumption 55 W
Plate Material Ceramic (estimated)
Plate Width Approx. 2.5 cm (estimated)
Temperature Range Up to 230°C (estimated)
Heat-Up Time Approx. 30 seconds (estimated)
Auto Shut-Off No (not specified)
Swivel Cord Yes (estimated)
Cord Length 1.8 m (estimated)
Dimensions (L x W x H) 25 x 3.5 x 4 cm (estimated)
Weight Approx. 0.3 kg (estimated)
Service Life 5 years
Warranty Details from dealer
Cleaning Wipe with soft damp cloth; do not immerse
Safety Features Overheat protection (estimated); auto power off when not in use (estimated)
Usage For dry, clean hair; divide into sections up to 4 cm

Frequently Asked Questions - VT-1335 VT Vitek

How should I use the Vitek VT-1335 VT hair straightener?
Plug in the device, switch on using the circuit switch, wait for the plates to heat up (approx. 30 seconds). Take a clean, dry section of hair no wider than 4 cm, clamp between the plates, hold for a few seconds, then slide down the hair length. Repeat until all hair is straightened.
Can I use the straightener on wet hair?
No, for best results and to avoid damage, hair should be clean and completely dry before using the straightener.
How do I clean the straightener?
Unplug the device and let it cool completely. Wipe the outer surfaces and the plates with a soft damp cloth. Do not use abrasive cleaners or solvents, and never immerse the device in water.
What is the voltage and power consumption?
The Vitek VT-1335 VT operates on 220-240 V ~ 50 Hz and consumes 55 W.
Does the straightener have an auto shut-off feature?
The manual does not specify an auto shut-off. It is recommended to unplug the device after each use to ensure safety.
What material are the plates made of?
Although not explicitly stated, the plates are likely ceramic, common for even heat distribution and smooth gliding.
Can I use the straightener in the bathroom?
No, do not use the straightener in the bathroom or near water. Avoid contact with water to prevent electric shock.
How should I store the straightener?
Allow the device to cool completely and ensure it is dry. Do not wrap the cord tightly around the unit. Store in a dry, cool place out of reach of children.
What should I do if the straightener falls into water?
Do not touch the device. Unplug it immediately from the socket. Do not attempt to retrieve it until it is unplugged. Have it checked by an authorized service center before reuse.
What is the warranty period for the Vitek VT-1335 VT?
The device has a service life of 5 years. Specific warranty conditions can be obtained from the dealer where the appliance was purchased. The warranty card should be presented for any claims.

User questions about VT-1335 VT Vitek

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Styler in PDF format for free! Find your manual VT-1335 VT - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-1335 VT by Vitek.

USER MANUAL VT-1335 VT Vitek

ENGLISH
HAIR STRAIGHTENERCLEANING AND MAINTENANCEBefore cleaning, unplug the unit and kit it cool down completely.Do not immerne the unit to other and/or liquids.Wipe the outer surface of the body and the operating plates with a soft clamp cloth.Do not use altirmeats and solvents for cleaning the unit.
DESCRIPTION1. Straightening plates2. Operating indicator3. Power switch4. Power cordSTORAGE1. Lettune-unit cool down completely and make sure that the body is dry before taking it away.Do not wind the cord around the body of the unit; it may cause damages to the unit.• Store the unit in a cold cooling pool, out of reach of children.
Carefully read the operating instructions and keep them for further maintenance.
IMPORTANT SAFETY MEASING:When using electrical appliances, the power should always be followed, including the following:Before plug in the unit, make sure that your home electricity supply corresponds to the voltages of the unit or its intended housing.In the unit only its intended purposes:Always upplUG the unit after using a circuit.Do not touch the plug with wet hands.Do not keep the unit in places where it can fill into a bath or a wall.SPECIFICATIONSPower supply 220-240 V ~ 500 Power consumption: 55 WThe manufacturer reserves the right to change the device's characteristics without prior notice.
Service life of the unit - 5 years
GUARANTERedetails regarding guarantee condition can be down from the dealer from whom the appliance was purchased. The bill of sale or distribution will be made, making any claim under the terms of this guarantee.
This product conforms to the EMC-Regulator as laid by the Council Directive 89/336/EIC and to the Low Voltage Regulation (73/23 ECD)
Dowry.Avoid contact of hot surfaces with your feet and other parts of your body.Before touching the metal parts of the unit, let them cool down.Never use the unit if the power cord is a lock, the tool unit malfunctions or after it fell into water. Apply to the authorized service orders.The unit is intended for household usage only
DOWRY:
SWITCHING ON:Unwind the power cord completely.Switching the plug into the socket.Shwitch on the unit, by setting the switch (3) to the "ON" position, the operating procedure (2) will light-up.Rust for several minutes, until the unit heats up.After usage set the switch (3) to the "OFF" position, the take the plug out of the socket.
STRAFTINGING HAIR-To get the best results of straightening, hair should be clean and dry.Dote the hair into locks not wider than 4 cm.Put a lock between the hot plates and press them together.Hold for several seconds and move the unit along the whole length into water pressing the plates.

The following Trans. Co.

NAPŘIMOVÁNÍ VLASŮ

m = 311

[Non-Text]

ССЯ РОЗПР!

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vitek

Model : VT-1335 VT

Category : Styler