Vitek VT-2272 BK - Styler

VT-2272 BK - Styler Vitek - Free user manual and instructions

Find the device manual for free VT-2272 BK Vitek in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vitek VT-2272 BK - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeHairbrush Dryer (Styler)
BrandVitek
ModelVT-2272 BK
ColourBlack
Power Supply220-240 V ~, 50/60 Hz
Power ConsumptionApprox. 1200 W
Heat Settings2 (Warm and Hot) plus Cool Shot
Fan Speeds2 (Low and High)
Concentrator NozzleYes, included
Hanging LoopYes, for storage
Dimensions (folded)Approx. 28 x 15 x 6 cm
WeightApprox. 400 g
Cord LengthApprox. 1.8 m
Safety FeaturesOverheat protection, automatic shut-off (if applicable)
Cleaning and MaintenanceWipe with a damp cloth, do not immerse in water. Clean air inlets regularly.
Accessories IncludedConcentrator nozzle, user manual
WarrantyStandard manufacturer warranty (check local regulations)
Intended UseHair drying and styling
CertificationsCE, Low Voltage Directive, EMC Directive

Frequently Asked Questions - VT-2272 BK Vitek

How do I clean the Vitek VT-2272 BK hairbrush dryer?
Unplug the device and let it cool completely. Wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse in water. Clean the air inlet grille with a soft brush to remove dust and hair.
What voltage does the VT-2272 BK operate on?
It operates on 220-240 V at 50/60 Hz. Check your local voltage before use.
How do I use the cool shot button?
Press and hold the cool shot button (marked with an asterisk *) while styling to release a burst of cool air. This helps set the hairstyle and reduce heat damage.
Can I use this hairbrush dryer near water?
No. Do not use it near bathtubs, showers, or swimming pools. If it falls into water, unplug immediately before retrieving. For bathroom use, install a residual current device (RCD) with rated current not exceeding 30 mA.
How do I switch between heat settings?
Use the slider switch on the handle: position ‘0’ off, ‘1’ warm air for gentle drying and styling, ‘2’ hot air for faster drying. The cool shot is a separate button.
What should I do if the appliance stops working?
First, check that it is plugged in and the power outlet works. If it still does not operate, contact Vitek service center. Do not attempt to repair it yourself.
Is the concentrator nozzle removable?
Yes, the concentrator nozzle can be attached or detached for focused airflow. Let it cool down before handling.
Can I use this hairbrush dryer on wet hair?
Yes, it is designed to dry and style damp or wet hair. Start on low heat to avoid damage, then use higher heat for faster drying.
How should I store the VT-2272 BK after use?
Let the device cool down completely. Do not wrap the cord around the appliance. Use the hanging loop for convenient storage. Keep it in a dry place.
What is the warranty period for Vitek products?
Warranty terms vary by region. Typically, Vitek offers a 1-2 year warranty. Check your local warranty card or contact Vitek customer support for details.

User questions about VT-2272 BK Vitek

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Styler in PDF format for free! Find your manual VT-2272 BK - Vitek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VT-2272 BK by Vitek.

USER MANUAL VT-2272 BK Vitek

5 Eyelet for hanging o

6 Concentrato

Attention! Do not use this appliance near

the tanks filled with water (bathnuts, swim-

ming pools, etc.)

- When using the hairdryer inside a bath-room, disconnect the appliance from

power supply line after each usage by un-

plugging it from wall outlet, as being near

by water is dangerous even when hard cryer is switched off.

• For the sale of additional protection, it is

device (PCD) with rated operating current no more than 30 mA into power supply line

of the bathroom. Invite only qualified spe-

cialist for installation,

Important safety measures While using electric appliances in presence

of children specially, it is necessary to com-

ply with certain safety measures including

the following:

Read all instructions carefully before us-

ing brush hairdryer

In order to avoid electric shock:

1. Before matching on males sure news

supply line voltage meets operating volt-

age of the hairdryer.

• After usage, always disconnect hairdryer

from wall outlet. Do not pull power cord

plug out by holding the cord itself. Do not

hold power cord plug with wet hands.

• Do not like the appliance near by tank filled with water (bottled, swimming pool

lineed water (bathroom, swimming pool, etc.)

4. Do not deposit or store the appliance at

as the object of store the appliance is places from where it would fall down into a

bathstuh or basin filled with water.

- Do not use the hairdryer while taking bath.

- Do not immerse the appliance into water

or any other liquids.

• In case hairdryer falling into water first un-

plug power cord, only afterwards you can

take the hairdryer out of water.

- Never leave operating appliance unat-

tended.

- Special attention is required when used by children or involute

- Use only for intended purpose, opens with porries included into delivery set

with NOLICE Methods and Delivery set only.

- It is forbidden using the hairdress when si-

ther power cord or plug is damaged or the

hairdryer operates erratically or after tall-

ing into water. Apply to service center for

all problems concerning reparation.

- Keep power cord far from hot surfaces.

• It is forbidden to close hairdryer air open-

ings. Do not put hairdryer on soft surfaces

(bed or sofa) where air inlets would be

blocked. There should not be any full,

dust, nails, etc. inside air openings.

• Do not use the hardcover when you are always

4. Do not drop or insert any foreign objects

into headpower housing outlets

- Do not switch on or use the hairliver at

place you have a good way spread of yola-

tile flammable liquids are used.

- Do not direct hot air jet to your eyes or to

any part of body sensitive to heat.

- Nozzles become hot while operating. Let it

cool down before detaching.

• Let metallic parts of the appliance and

nozzle cool down before touching.

- Avoid your hair being caught inside air inlet

grill white hairdryer is in operation.

• Add your face, neck and other parts of body being involved by hot partners of the

body being touched by hot surfaces of the appliance.

1. Do not use

theetic wise.

- Do not put the appliance on surfaces ses-

sitive to heat until it is cooled down.

- Let the appliance cool down before storing

it, never wind power cord round the appli-

ance.

- Examine whether or not power cord is in-

tact regularly.

unwind power cord completely.

Keep this Operating Manual for future

Keep this Operating Manual for future references

reference.

Switching on brush hoirdoes

1. Before switching on male sure power

supply line voltage meets operating volt-

age of the hairdryer.

• Unwind power cord completely.

- Set required operating mode by switch

(2):

“0” – hair dryer is ON;

"1" - warm shot for hair drying and soft

hair styling:

"2" – hot shot for fast hair drying and com-

pacified hair setting

★ - +cod that;

- Requirements as laid down by the

C Council Directive 88/336/EEC

and to the Low Voltage Regulation

(73/23 EEC)

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

[Non-Text]

m = 311

DEUTSCH

m = 311

WARM

Deech

1 Bür

2 BHI 3 Tai

4 Luft 5 Auf

5. Dev

1 BUTI

MEATL Badeva

fläßen,

• Yiken

wena

2014

kann • Day

tung

nige pali

Elekt

WIGHT

Daim C

sonder Sichert

lich fui

VOR D

LESEN

Um das

• Ver- trieb

mit c

• Sich

der

den • Dies

man,

• Lega

wo e Wes

• Nutr

Stack

Fiscal

• Soll Matr

greift

• Retr • Res

Fille

Pers • Bagn

mun

• Esi10

Netz

ins V

elmer tier

• Half

cher 1. Die

deck

ČESKY

FÉN KARTÁČEK

F

Pop

1

  1. Prejimač rezinušćuri
  2. Knafliček pro demor
Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vitek

Model : VT-2272 BK

Category : Styler