DS-2CD2612F-IS - Security Camera Hikvision - Free user manual and instructions
Find the device manual for free DS-2CD2612F-IS Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | IP security camera |
| Model | DS-2CD2612F-IS |
| Brand | Hikvision |
| Image sensor | 1/3" Progressive Scan CMOS |
| Resolution | 1.3 Megapixels (1280 × 960) |
| Lens | 2.8 mm fixed lens |
| IR range | Up to 20 meters |
| Video compression | H.264, MJPEG |
| Power supply | 12 VDC ± 10%, PoE (802.3af) |
| Power consumption | Max. 5 W |
| Dimensions (Ø × H) | 70 × 156 mm |
| Weight | Approx. 500 g |
| Operating temperature | -30 °C to +60 °C |
| Ingress protection | IP66 (weatherproof) |
| Storage | MicroSD card slot (up to 128 GB) |
| Network interface | 1 × RJ45 10/100 Mbps |
| Audio | 1 input, 1 output (optional) |
| Alarm I/O | 1 input, 1 output |
| Analog output | 1 × BNC (for installation) |
| Maintenance | Clean lens with soft dry cloth; check cables regularly |
| Safety | Use supplied power adapter; avoid exposure to extreme conditions |
| Spare parts | Mounting bracket, power adapter (optional), RJ45 connector |
Frequently Asked Questions - DS-2CD2612F-IS Hikvision
How do I reset the DS-2CD2612F-IS to factory defaults?
Press and hold the reset button (located on the cable) for about 10 seconds until the camera reboots. Alternatively, use the web interface under Configuration > System > Maintenance > Factory Defaults.
What is the default IP address of this Hikvision camera?
The default IP address is 192.168.1.64. You can also use the SADP tool from Hikvision to discover the camera on your network.
Can I view the camera feed on my smartphone?
Yes, download the Hik-Connect or iVMS-4500 app. Add the camera by scanning its QR code or entering its serial number.
Does this camera support PoE?
Yes, the DS-2CD2612F-IS supports PoE (Power over Ethernet) 802.3af. You can power it via a PoE switch or injector.
What is the maximum SD card capacity?
The camera supports microSD cards up to 128 GB. For reliable recording, use a high-endurance card.
How do I enable motion detection?
Log into the web interface, go to Configuration > Events > Basic Event > Motion Detection. Draw detection areas and set sensitivity. Then configure recording triggers.
Is the camera weatherproof?
Yes, it has an IP66 rating, meaning it is dust-tight and protected against heavy rain. Suitable for outdoor use.
Can I use the camera with a NVR?
Yes, it is compatible with Hikvision NVRs and other ONVIF-compliant NVRs. Add it via IP address or plug and play on the same subnet.
What should I do if the camera is not streaming video?
Check network cables, ensure PoE or power is active, verify IP address and port forwarding. Restart the camera and try using the SADP tool to confirm it is online.
How do I update the firmware?
Download the latest firmware from Hikvision website. In the web interface, go to Configuration > System > Maintenance > Firmware Upgrade and upload the file. Do not interrupt power during upgrade.
User questions about DS-2CD2612F-IS Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual DS-2CD2612F-IS - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-2CD2612F-IS by Hikvision.