N5200 RouStor - Server Thecus - Free user manual and instructions
Find the device manual for free N5200 RouStor Thecus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) Server |
| Brand | Thecus |
| Model | N5200 RouStor |
| Number of Drive Bays | 5 x 3.5-inch SATA (hot-swappable) |
| Processor | Intel Celeron M 1.5 GHz |
| Memory | 1 GB DDR2 RAM (expandable to 4 GB) |
| LAN Ports | 2 x Gigabit Ethernet (RJ-45) |
| USB Ports | 2 x USB 2.0 (front), 2 x USB 2.0 (rear) |
| RAID Levels Supported | RAID 0, 1, 5, 6, 10, JBOD |
| Power Supply | 250W internal AC power supply |
| Input Voltage | 100-240V AC, 50-60Hz |
| Dimensions (W x H x D) | 320 x 220 x 170 mm |
| Weight | 5.0 kg (without drives) |
| Cooling | 1 x 120mm system fan |
| Operating System Support | Windows, macOS, Linux |
| Management Interface | Web-based (HTTP/HTTPS) |
| File System Support | EXT3, EXT4, XFS, Btrfs |
| Maintenance & Cleaning | Use a dry, soft cloth to clean exterior; avoid liquids and compressed air. |
| Safety Precautions | Ensure proper ventilation; do not block air vents; disconnect power before servicing. |
| Spare Parts & Repairability | Spare parts include power supply, fan, and drive trays; user-replaceable with basic tools. |
| General Information | Designed for SMB and home users; supports iSCSI, AFP, SMB/CIFS, FTP, and NFS protocols. |
Frequently Asked Questions - N5200 RouStor Thecus
How do I access the web management interface?
Open a web browser and enter the default IP address (192.168.1.100) or use the setup wizard. Default username is admin with password admin.
What RAID levels are supported?
The N5200 supports RAID 0, 1, 5, 6, 10, and JBOD. You can configure RAID during initial setup or via the storage manager.
Can I hot-swap drives?
Yes, the drive bays are hot-swappable. Ensure the drive is unmounted via the web interface before removal to avoid data corruption.
What is the maximum hard drive capacity?
Each bay supports up to 16TB SATA drives, giving a maximum raw capacity of 80TB when using 16TB drives.
How do I reset the device to factory defaults?
Press and hold the Reset button on the back panel for 10 seconds using a paperclip until the system beeps twice.
Can I attach USB printers or external drives?
Yes, the USB 2.0 ports support printers and external storage. Printers can be shared over the network via USB Print Server.
How to update the firmware?
Download the latest firmware from Thecus support site. In the web interface, go to Administration > Firmware Upgrade and upload the file.
What protocols are supported for file sharing?
It supports SMB/CIFS (Windows), AFP (Mac), NFS (Linux), FTP, and WebDAV. You can enable/disable each protocol in the settings.
Is the device fan quiet?
The 120mm fan is relatively quiet at idle. Noise level may increase under high load. You can adjust fan speed in the system settings if needed.
How do I configure email notifications?
Go to System Management > Notification. Enter SMTP server details and your email address to receive alerts on disk failure, system events, etc.
User questions about N5200 RouStor Thecus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual N5200 RouStor - Thecus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. N5200 RouStor by Thecus.