SKS 4030WH - Kitchen scale SENCOR - Free user manual and instructions

Product Type	Kitchen scale
Brand	Sencor
Model	SKS 4030WH
Color	White
Platform Material	Tempered glass
Housing Material	ABS plastic
Maximum Capacity	5 kg (11 lb)
Graduation	1 g (0.1 oz)
Power Supply	2 x AAA batteries (included)
Display	LCD
Tare Function	Yes
Unit Conversion	Yes (g / lb:oz)
Auto-Off	Yes (after approx. 60 seconds)
Overload Indicator	Yes ("O-Ld")
Low Battery Indicator	Yes ("Lo")
Platform Dimensions	15 x 15 cm (square)
Product Dimensions	20 x 15 x 2 cm
Net Weight	320 g
Included Accessories	AAA batteries
Cleaning	Wipe with a damp cloth; do not immerse in water

Frequently Asked Questions - SKS 4030WH SENCOR

How do I change the batteries on my Sencor SKS 4030WH?

Open the battery compartment on the bottom of the scale. Remove the old batteries and insert two new AAA batteries, observing correct polarity. Close the compartment firmly.

How do I tare the scale?

Place an empty container on the scale. Press the TARE button to reset the display to zero. You can now add ingredients to the container. The weight shown will be the net weight of the food.

How do I convert between grams and pounds/ounces?

Press the MODE or UNIT button to toggle between weight units. The scale supports grams (g) and pounds:ounces (lb:oz).

What is the maximum weight the scale can handle?

The maximum capacity is 5 kg (11 lb). Exceeding this may damage the scale or cause inaccurate readings. The display will show 'O-Ld' to indicate overload.

What does 'Lo' on the display mean?

'Lo' indicates the batteries are low. Replace them with two new AAA batteries as soon as possible to ensure accurate weighing.

How do I clean the scale?

Use a soft, damp cloth to wipe the glass platform and plastic housing. Avoid using abrasive cleaners or immersing the scale in water. Dry thoroughly after cleaning.

The scale does not turn on. What should I do?

First, check if the batteries are installed correctly and have sufficient charge. If the scale still does not turn on, try replacing the batteries. Ensure the battery contacts are clean and free of corrosion.

Why are the measurements inconsistent?

For consistent readings, place the scale on a flat, stable surface. Avoid using it on carpets or uneven surfaces. Also, make sure the scale is not overloaded and the batteries are fresh.

Does the scale have an auto-off feature?

Yes, the scale will automatically turn off after approximately 60 seconds of inactivity to save battery life. You can manually turn it off by pressing and holding the power button.

What should I do if I get an error message?

If an error like 'Err' appears, remove any weight and turn the scale off. Wait a few seconds and turn it back on. If the error persists, check the batteries and ensure the platform is clean.

USER MANUAL SKS 4030WH SENCOR

Digital kitchen scale with a digital display showing temperature reading of 12.36 degrees (no text or symbols on the device itself)

SENCOR®

SKS 4030BK / SKS 4030WH