SC-220 - Kettle Scarlett - Free user manual and instructions

Brand	Scarlett
Model	SC-220
Product Type	Electric Kettle
Capacity	1.7 L
Power Rating	2200 W
Voltage	220-240 V
Frequency	50/60 Hz
Material	Stainless steel body, plastic handle
Dimensions (HxWxD)	25 x 22 x 18 cm
Weight	1.2 kg
Cord Length	0.7 m
Auto Shut-off	Yes
Boil-Dry Protection	Yes
Overheat Protection	Yes
Lid Opening	One-button push-open
Spout	Gooseneck for precise pouring
Filter	Removable limescale filter
Base	360° swivel base with cord storage
Maintenance	Descale regularly with vinegar or citric acid
Cleaning	Wipe exterior with damp cloth; do not immerse in water
Safety Features	Auto shut-off, boil-dry protection, cool-touch handle
Warranty	1 year (check local store)

Frequently Asked Questions - SC-220 Scarlett

How do I clean the kettle?

Unplug the kettle and let it cool. Wipe the exterior with a damp cloth. To remove limescale, fill with a mixture of water and vinegar (1:2 ratio) and boil, then rinse thoroughly.

What is the capacity of this kettle?

The Scarlett SC-220 has a capacity of 1.7 liters, ideal for boiling water for tea, coffee, or cooking.

Does it have auto shut-off?

Yes, the kettle automatically shuts off once the water reaches boiling point. It also has boil-dry protection that turns it off if there is insufficient water.

How long does it take to boil water?

Boiling time depends on water volume, but typically 1 liter boils in about 3-4 minutes with a 2200W heating element.

Can I leave water in the kettle?

It is not recommended to leave water in the kettle for long periods, as it may cause limescale buildup and affect taste. Empty after use and dry the interior.

Why does my kettle make noise?

Noise during boiling is normal due to heating elements and bubble formation. A quiet kettle may indicate slower heating. Limescale can increase noise, so descaling may help.

What materials is it made of?

The body is stainless steel for durability, and the handle and lid are made of heat-resistant plastic for comfortable use.

Is the base cordless?

Yes, the kettle lifts off its 360° swivel base for easy pouring, and the base has a cord storage compartment to keep countertops tidy.

How do I prevent limescale?

Use filtered water if possible and descale regularly. Run a mixture of water and lemon juice or descaling solution monthly to maintain performance.

What should I do if the kettle doesn't turn on?

Check the power cord is connected properly and the base is plugged in. Ensure the kettle is properly seated on the base. If the problem persists, contact Scarlett customer support.

USER MANUAL SC-220 Scarlett

Illustration of a glass kettle with a black handle and inner volume markings (no text or symbols on the object itself)

www.scarlett.ru

GB DESCRIPTION

1. Base unit with cord storage compartment
2. Body
3. Spout
4. Filter
5. Lid
6. Lid open handle
7. On/Off switch
8. Handle
9. Water level scale

CZ POPIS

220-240 V~ 50 Hz

1850 - 2200 W

1.7 L

0.75/0.94 kg

mm

GB INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

• Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.
• Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
• Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
• For home use only. Do not use for industrial purposes.
  • Always unplug the appliance from the power supply when not in use.
• Keep the base unit away from water and protect from splashes.
• Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.
• Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary.
• Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.
• To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.
• Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.
• Do not leave the appliance unattended when in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.
• Never take the kettle from its base while in operation. Switch the appliance off first.
• ATTENTION: Do not open the lid while water is boiling.
• Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.
• The kettle is for heating water only, not for any other purposes and liquids.
• If the product has been exposed to temperatures below 0^ C for some time it should be kept at room temperature for at least 2 hours before turning it on
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

BEFORE USING FOR THE FIRST TIME

- Fill the kettle with cool water up to the maximum level mark and boil it. Empty the kettle. Repeat this operation. The appliance is ready for use.

INSTRUCTION FOR USE

FILLING

• Remove the kettle from the base unit.
• You can fill the kettle with water via the spout or neck with opened lid.
• Do not fill the kettle with less than 0.5 l of water (less than “MIN” mark) to prevent it from operating dry and more than 1.7 l (up to “MAX” mark) to avoid overfilling and water spilling out during the boiling.

SWITCHING ON

• After filling with water, place the kettle on the base unit.
- Connect the plug to the power supply and push On/Off switch. The appliance will turn on and indicator will light. SWITCHING OFF
- When water begins to boil, the kettle will switch off automatically and indicator light will go off.
- NOTE: This appliance has a safety system, which automatically switches heating element off if the appliance inadvertently has been switched on when empty, or if it operates dry. In this case let the appliance cool down 10 minutes before filling with water again.

SWITCHING ON AGAIN

- If the kettle has been switched off automatically, it can be switched on again after cooling for 15-20 seconds.

CARE AND CLEANING

• Open the lid and pour out the water through the orifice.
  • Always remove the plug from the socket and let the appliance cool down completely.
• Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive materials.
• Remove scale regularly, using special descaling agents, available at the market, following given instructions.

STORAGE

• Switch off and unplug the appliance; let it entirely cool.
• Complete all requirements of Chapter CLEANING AND CARE.
• The cord can be wrapped around the base area for storage.
• Keep the appliance in a dry cool place.