3G-6200n - Router Edimax - Free user manual and instructions
Find the device manual for free 3G-6200n Edimax in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless N 3G/4G Router |
| Dimensions (approx) | 150 x 120 x 30 mm |
| Weight (approx) | 250 g |
| Power Supply | 5V DC, 1A |
| Wireless Standard | IEEE 802.11b/g/n |
| Maximum Wireless Speed | 150 Mbps |
| Frequency Band | 2.4 GHz |
| Ports | 1 WAN, 4 LAN (10/100 Mbps) |
| USB Port | 1 x USB 2.0 for 3G/4G modem |
| Antenna | 2 external detachable antennas |
| Security | WEP, WPA/WPA2, MAC filtering, SSID broadcast disable |
| Firewall | SPI firewall, NAT, VPN pass-through |
| Management | Web-based GUI, WPS button, reset button |
| Compliance | CE, FCC |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Clean with a soft dry cloth; avoid liquids |
| Spare Parts | Not applicable (router typically replaced) |
| Package Contents | Router, power adapter, ethernet cable, quick start guide, CD |
Frequently Asked Questions - 3G-6200n Edimax
How do I set up the Edimax 3G-6200n router?
Connect the router to your computer via Ethernet cable, plug in the power, and open a web browser. Enter 192.168.2.1 and follow the quick setup wizard to configure your internet connection (3G/4G modem or wired).
What is the default login and password?
The default username is admin and password is 1234. You can change these in the router's web interface under System Settings.
How do I reset the router to factory defaults?
Press and hold the reset button on the back panel for about 10 seconds until the power LED blinks. Release the button; the router will reboot with factory settings.
Can I use a USB 3G/4G modem with this router?
Yes, the Edimax 3G-6200n supports many USB 3G/4G modems. Plug the modem into the USB port, then configure the connection in the web interface under 3G/4G Settings.
How to change the WiFi password?
Log in to the router's web interface, go to Wireless Settings > Security, and enter a new passphrase in the WPA Pre-Shared Key field. Save the settings.
What should I do if I forget my router password?
If you forget the admin password, perform a factory reset by holding the reset button for 10 seconds. This will revert all settings to default including the password.
How do I update the router firmware?
Download the latest firmware from Edimax support site, then log in the router, go to System Tools > Firmware Upgrade, select the file and start upgrade. Do not power off during update.
Can I use this router as a wireless repeater?
The 3G-6200n does not have a dedicated repeater mode, but you can configure it as a wireless client/bridge via the Wireless Distribution System (WDS) if supported. Check the manual for details.
How to secure my wireless network?
Enable WPA2-PSK encryption with a strong password. Also disable SSID broadcast and enable MAC address filtering under Wireless Settings > Advanced.
What does the WPS button do?
The WPS button allows you to quickly connect a WPS-enabled device to your WiFi network. Press the button on the router, then activate WPS on your device within 2 minutes.
User questions about 3G-6200n Edimax
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual 3G-6200n - Edimax and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 3G-6200n by Edimax.