Frost FX Bar RGBW - Uncategorized Eliminator Lighting - Free user manual and instructions
Find the device manual for free Frost FX Bar RGBW Eliminator Lighting in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Light Bar |
| Model | Frost FX Bar RGBW |
| Brand | Eliminator Lighting |
| LED Type | RGBW Quad-Chip LEDs |
| Number of LEDs | 12 |
| Beam Angle | 40 degrees |
| Power Consumption | 60W |
| Input Voltage | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 600 x 80 x 120 mm |
| Weight | 1.8 kg |
| Control Protocol | DMX512 (3-pin XLR) |
| DMX Channels | 4/8/10/12/18 channel modes |
| Operating Modes | Standalone, Master/Slave, Sound Active, DMX |
| Display | 4-digit LED display with menu buttons |
| Housing Material | Aluminum and plastic |
| Cooling | Passive convection |
| Safety Features | Overheat protection, safety cable loop |
| Maintenance & Cleaning | Clean with soft dry cloth; avoid solvents |
| Spare Parts & Repairability | Contact authorized service center for parts |
| Included Accessories | Power cord, DMX cable, mounting bracket |
Frequently Asked Questions - Frost FX Bar RGBW Eliminator Lighting
How do I set up the Frost FX Bar RGBW for the first time?
Connect the power cord to a suitable AC outlet. Use the menu buttons on the display to select an operating mode (e.g., DMX, sound active). For DMX, connect a DMX controller via 3-pin XLR cables and set the DMX address.
Can I use this light bar without a DMX controller?
Yes, the Frost FX Bar RGBW has standalone modes including sound active and master/slave. In sound active mode, the light reacts to music via the built-in microphone. In master/slave, you can link multiple units for synchronized effects.
What are the DMX channel modes available?
The fixture supports 4, 8, 10, 12, and 18 channel modes. The 4-channel mode controls RGBW colors. Higher channel modes offer additional features like strobe, dimmer curves, and individual pixel control.
How do I clean the Frost FX Bar RGBW?
Disconnect power before cleaning. Use a soft, dry cloth to wipe the housing and lens. Do not use abrasive cleaners or solvents. Ensure the ventilation slots are free from dust.
What is the maximum power consumption?
The maximum power consumption is 60 watts at full brightness. It operates on standard AC 100-240V, making it suitable for most regions.
Can I mount the light bar on a truss?
Yes, the fixture comes with a mounting bracket that allows hanging or clamping onto a truss. Use a safety cable (attached via the built-in loop) for added security.
How do I update the firmware?
The Frost FX Bar RGBW does not have user-updatable firmware. For any updates, contact Eliminator Lighting support or an authorized service center.
What should I do if the display shows an error?
Refer to the user manual for error codes. Common issues include overheating (let it cool down) or no DMX signal (check cable connections). If the problem persists, contact support.
Is the light bar suitable for outdoor use?
No, this fixture is designed for indoor use only. Exposure to moisture or extreme temperatures may damage the electronics.
Where can I find spare parts or repair service?
Spare parts and repairs are handled by authorized Eliminator Lighting service centers. Contact the retailer or visit the manufacturer's website for a list of service providers.
User questions about Frost FX Bar RGBW Eliminator Lighting
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Frost FX Bar RGBW - Eliminator Lighting and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Frost FX Bar RGBW by Eliminator Lighting.