Compugilist - Guitar amplifier FENDER - Free user manual and instructions

Product Type	Dual-Effect Guitar Pedal (Compressor + Distortion)
Brand	Fender
Model	Compugilist
Dimensions	3.75 x 4.9 x 2.5 inches (95.25 x 124.5 x 63.5 mm)
Weight	1.2 lbs (0.54 kg)
Power Supply	9VDC regulated adapter, 5.5 x 2.1 mm barrel connector, center negative
Power Consumption	75 mA @ 9VDC
Input Impedance	820 kΩ
Output Impedance	< 6 kΩ
Compressor Controls	Recovery, Compression, Level
Distortion Controls	Gain, Tone, Level, Bass Boost
Bypass Switching	Independent footswitches with LED indicators for compressor and distortion
Additional Features	Gain Reduction LED, Low Battery Indicator, LED Kill Switch
Input Jack	High-impedance 1/4" jack for guitar, bass, keyboards, etc.
Output Jack	Low-impedance 1/4" jack for amplifier or next pedal
DC Power Connector	Standard center-negative 9VDC jack
Safety	Do not expose to rain or moisture; use only certified power adapter
Cleaning	Unplug adapter, clean with damp cloth, dry completely before reconnecting
Reparability	No user-serviceable parts; refer servicing to qualified personnel
Manufacturer	Fender Musical Instruments Corporation, Corona, California, USA

Frequently Asked Questions - Compugilist FENDER

What type of power supply does the Compugilist require?

The Compugilist requires a 9VDC regulated adapter with a 5.5 x 2.1 mm barrel connector, center negative polarity. It draws 75 mA.

Can I use a battery with the Compugilist?

The manual does not mention a battery compartment; the Compugilist is designed to be powered via the DC power connector only. A 9VDC adapter is required.

How do I connect the Compugilist to my guitar and amp?

Connect your guitar to the Input Jack (high-impedance) and connect the Output Jack to your amplifier or the next pedal in your chain. Use standard 1/4" instrument cables.

What do the controls on the compressor side do?

The compressor side has Recovery (controls release time), Compression (amount of compression ratio), and Level (output volume). The G.R. LED lights up when gain reduction is active.

What does the Bass Boost switch do?

The Bass Boost switch adds low-end frequencies to your signal, giving you more bottom end when engaged.

How do I bypass the effects?

Each effect has its own footswitch. Press the Compressor Bypass Footswitch to toggle the compressor on/off, and the Distortion Bypass Footswitch for distortion. The corresponding LED lights when the effect is active.

What is the LED Kill Switch for?

The LED Kill Switch turns off the control knob illumination. This is useful for saving battery (if using a non-standard power source) or reducing light on a dark stage.

What instruments can I use with the Compugilist?

The high-impedance input is suitable for electric guitar, bass, acoustic guitars with pickups, keyboards, and other instruments with a standard 1/4" output.

How should I clean the Compugilist?

Unplug the power adapter first. Use a damp cloth to clean the exterior. Wait until the unit is completely dry before reconnecting power.

Is the Compugilist user-serviceable?

No, there are no user-serviceable parts inside. Refer all servicing to qualified personnel only to avoid damage or shock hazard.

USER MANUAL Compugilist FENDER

1. Distortion Bypass Footswitch & LED
2. Output Jack
3. Level (Distortion)
4. Tone
5. Gain
6. Bass Boost
7. Recovery

8. Compression

9. Level (Compressor)

10. Gain Reduction LED
11. Input Jack
12. Compressor Bypass Footswitch & LED
13. Low Battery Indicator
14. LED Kill Switch
15. DC Power Connector

COMPUGILIST

Thanks for purchasing Compugilist – a versatile new dual-effect unit based on two of our most popular pedals: The Bends Compressor and Pugilist Distortion. Both effects are independently switchable and feature straightforward controls. The Compressor offers Recovery, Compression and Level controls, with a Gain Reduction indicator light. The Distortion side offers familiar Gain, Tone and Level controls.

The Compugilist is a great way to get that classic "mastered" rock tone in a single pedal.

Distortion Bypass Footswitch & LED

Footswitch bypasses distortion effect. LED Illuminates when distortion effect is active.

Level (Distortion)

Controls overall distortion output level.

Tone

Similar to tone control on a guitar — turn counterclockwise to decrease treble frequencies; turn clockwise for full-range tone.

Gain

Controls amount of distortion added to signal.

Bass Boost

Boosts low-end frequencies.

Compressor Bypass Footswitch & LED

Footswitch bypasses compressor effect. LED Illuminates when compressor effect is active.

Recovery

Controls compressor recovery time.

Compression

Controls amount of compression (compression ratio).

Level (Compressor)

Controls overall compressor output level.

G.R. (Gain Reduction) LED

Illuminates when gain is actively being reduced.

Input Jack

High-impedance input suitable for electric guitar, bass, acoustic guitars with pickup systems, keyboards and other instruments.

Output Jack

Low-impedance output jack connects to amp or to next effect pedal in signal chain.

DC Power Connector

Standard center-negative 9VDC jack for use with appropriate power supplies.

LED Kill Switch

Deactivates control-knob illumination.

A PRODUCT OF:

FENDER MUSICAL INSTRUMENTS CORPORATION

CORONA, CALIFORNIA, USA

Fender® is a registered trademark of FMIC.

Copyright © 2019 FMIC. All rights reserved.

P/N 7717097000 - REV 1

Important Safety Instructions

• WARNING: To prevent damage, fire or shock hazard, do not expose the unit or its AC power to rain or moisture.
• Do not alter the AC plug of the connected power adapter
• Do not drip or splash liquids on the unit.
• No user serviceable parts inside, refer servicing to qualified personnel only.
• WARNING: The unit must only be connected to a safety agency certified, regulated, power source (adapter), approved for use and compliant with applicable local and national regulatory safety requirements.
• Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth for cleaning and then wait until the unit is completely dry before reconnecting it to power.
• Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable of producing very high sound pressure levels which may cause temporary or permanent hearing damage. Use care when setting and adjusting volume levels during use.

Additional Languages

Manual available in additional languages at:

www.fender.com/support

Specifications

IMPEDANCES:

POWER SUPPLY:

INPUT: 820kΩ OUTPUT: <6kΩ

9VDC regulated adapter,

5.5 x 2.1 mm barrel connector, center negative

POWER REQUIREMENTS:

75mA @ 9VDC

DIMENSIONS:

WEIGHT:

3.75" × 4.9" × 2.5" (95.25mm × 124.5mm × 63.5mm)

1.2lbs (.54kg)

NOTES:

Fender

© FENDER MUSICAL INSTRUMENTS 2019

产品中有害物质的名称及含量