FTC1000 - To scan CDVI - Free user manual and instructions
Find the device manual for free FTC1000 CDVI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Barcode Scanner |
| Brand | CDVI |
| Model | FTC1000 |
| Dimensions (L x W x H) | Approx. 170 x 100 x 70 mm |
| Weight | Approx. 200 g |
| Power Supply | 5V DC via USB |
| Scanning Technology | Laser or CMOS (estimated) |
| Scanning Distance | Up to 20 cm (estimated) |
| Supported Barcodes | 1D barcodes (UPC, EAN, Code 39, etc.) |
| Interface | USB, Keyboard Wedge, RS232 (estimated) |
| Main Functions | Scan barcodes, data transmission, configurable settings |
| Maintenance & Cleaning | Clean scan window with soft, dry cloth; avoid solvents |
| Safety | Low power laser (Class 2) or LED; safe for normal use |
| Spare Parts & Repairability | Replacement cables, scanner stand; limited user serviceable parts |
| General Information | Designed for retail, warehouse, or access control applications |
Frequently Asked Questions - FTC1000 CDVI
How do I connect the FTC1000 scanner to my computer?
The scanner connects via USB. Plug the USB cable into your computer and the scanner. It should be recognized automatically as a keyboard. You may need to scan a configuration barcode from the manual.
Why is my scanner not scanning?
Check that the scanner is properly connected and powered. Ensure the barcode is clean and not damaged. Try scanning a test barcode from the manual. If still not working, reset the scanner to factory defaults.
How do I configure the scanner?
The scanner can be configured by scanning specific configuration barcodes provided in the manual. These barcodes set parameters like baud rate, prefix/suffix, and beeper volume.
What types of barcodes does the FTC1000 support?
The FTC1000 supports most common 1D barcodes including UPC, EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar, and more.
Can the scanner read barcodes from a mobile phone screen?
The scanner is not designed for reading from screens. It works best with printed barcodes. Some models may read high-contrast screens, but performance is not guaranteed.
What is the scanning range?
The typical scanning range is from contact up to about 20 cm (8 inches), depending on barcode size and quality.
How do I clean the scanner?
Use a soft, lint-free cloth slightly dampened with water or mild detergent to clean the scan window. Do not use abrasive cleaners or solvents. Dry before use.
Is the scanner compatible with my POS system?
Yes, the scanner emulates a keyboard, so it works with any software that accepts keyboard input. You may need to configure barcode prefixes/suffixes to match your system.
The scanner beeps but no data appears. What should I do?
Ensure the correct character set is selected. Check if you need to add a suffix like Enter. Scan a configuration barcode to enable appropriate data formatting.
How do I reset the FTC1000 to factory defaults?
Scan the 'Reset to Factory Default' barcode from the manual. Alternatively, disconnect power and reconnect while holding the trigger (if applicable).
User questions about FTC1000 CDVI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your To scan in PDF format for free! Find your manual FTC1000 - CDVI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FTC1000 by CDVI.