Supermicro SuperServer SSG-640SP-E1CR60 - Server

SuperServer SSG-640SP-E1CR60 - Server Supermicro - Free user manual and instructions

Find the device manual for free SuperServer SSG-640SP-E1CR60 Supermicro in PDF.

📄 123 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Supermicro SuperServer SSG-640SP-E1CR60 - page 9
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Server
Brand Supermicro
Model SuperServer SSG-640SP-E1CR60
Form Factor 4U Rackmount
Dimensions (WxDxH) 17.2 x 26.0 x 7.0 inches (437 x 660 x 178 mm)
Weight 55 lbs (25 kg) approximate
Power Supply Dual redundant 2000W (Platinum Level)
Processor Support Dual Intel Xeon Scalable (3rd Gen)
Drive Bays 60 x 3.5" hot-swap SATA/SAS
Memory Up to 4TB DDR4 ECC, 32 DIMM slots
Expansion Slots 6 x PCIe 4.0 (x16)
Networking Dual 10GbE (Intel X710)
Chassis SuperChassis CSE-740 (or similar)
Cooling 6 x 8cm heavy duty fans
Maintenance Hot-swap drives, tool-less access, front panel LCD
Safety UL, CE, FCC compliant
Spare Parts Available: PSU, fan modules, drive trays, backplane
Repair Field-replaceable units, limited warranty
Operating Temperature 10°C to 35°C (50°F to 95°F)
Supported OS Windows Server, Linux, VMware ESXi

Frequently Asked Questions - SuperServer SSG-640SP-E1CR60 Supermicro

What type of processors does the Supermicro SSG-640SP-E1CR60 support?
It supports dual Intel Xeon Scalable 3rd Gen processors (e.g., Gold 6000 series).
How many hard drives can be installed?
The chassis accommodates 60 hot-swap 3.5-inch SATA/SAS drives in the front.
What is the maximum memory capacity?
With 32 DIMM slots, it supports up to 4TB of DDR4 ECC memory (using 128GB modules).
What power supply does this server use?
It uses dual redundant 2000W Platinum-level power supplies for high efficiency.
How do I access the BIOS?
Press the Delete key during boot (after POST) to enter the AMI BIOS setup.
Can I use SAS drives with this server?
Yes, the backplane supports both SATA and SAS drives; a compatible HBA/RAID card is required for SAS.
What is the default network interface?
It features dual 10GbE ports via Intel X710 controller, plus dedicated IPMI.
How do I perform a factory reset?
You can reset by loading optimized defaults in the BIOS or clearing the CMOS jumper on the motherboard.
Is the server compatible with VMware?
Yes, Supermicro servers are VMware certified for ESXi (check HCL for exact version).
What maintenance is required?
Regularly clean dust filters, check fan status via IPMI, and replace failed drives hot-swap without powering down.

User questions about SuperServer SSG-640SP-E1CR60 Supermicro

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Server in PDF format for free! Find your manual SuperServer SSG-640SP-E1CR60 - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer SSG-640SP-E1CR60 by Supermicro.

USER MANUAL SuperServer SSG-640SP-E1CR60 Supermicro

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Supermicro

Model : SuperServer SSG-640SP-E1CR60

Category : Server