SuperServer E403-9D-14CN-FN13TP - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperServer E403-9D-14CN-FN13TP Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | Supermicro |
| Model | SuperServer E403-9D-14CN-FN13TP |
| Form Factor | 4U Rackmount |
| Dimensions (W x H x D) | 17.2 x 6.97 x 19.9 inches (437 x 177 x 505 mm) |
| Weight | Approximately 45 lbs (20.4 kg) |
| Processor | Intel Xeon D-2141NT (8 cores, 1.6 GHz) |
| Memory | DDR4 ECC, up to 256 GB (4x 64 GB DIMMs) |
| Storage | Supports SATA3, SAS3, and NVMe via expansion slots |
| Networking | Dual 10GbE (10GBase-T) and dual 1GbE |
| Power Supply | 1000W redundant (1+1) 80 PLUS Platinum |
| Cooling | 4x hot-swap fans with optimal fan speed control |
| Expansion Slots | 1x PCIe 3.0 x16, 1x PCIe 3.0 x8 (LP) |
| Management | IPMI 2.0 with dedicated LAN |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Operating Humidity | 8% to 90% (non-condensing) |
| Certifications | FCC, CE, UL, RoHS |
| Warranty | 3 years limited warranty |
Frequently Asked Questions - SuperServer E403-9D-14CN-FN13TP Supermicro
How do I install the server in a rack?
Use the included rackmount rails to fit the chassis in a standard 19-inch rack. Ensure the rack is stable and properly ventilated. Refer to the installation guide for step-by-step instructions.
What operating systems are supported?
The SuperServer E403-9D supports Windows Server, various Linux distributions (Ubuntu, CentOS, Red Hat), and VMware ESXi. Check Supermicro's compatibility list for exact versions.
How can I configure RAID?
RAID can be configured via the onboard SATA controller or an optional add-on RAID card. Access the RAID BIOS during boot (Ctrl+R) or use the IPMI web interface for software RAID.
How do I update the BIOS or firmware?
Download the latest BIOS and firmware from Supermicro's support page. Use the SUM (Supermicro Update Manager) tool or bootable USB drive with the update files. Ensure to backup settings before updating.
What is the maximum memory capacity?
The server supports up to 256GB of DDR4 ECC memory using four 64GB RDIMMs. Use matched modules for best performance.
How do I reset the IPMI password?
If you forgot the IPMI password, you can reset it by clearing the CMOS (jumper JBT1) or using the IPMI configuration utility via the serial console. Refer to the manual for exact jumper location.
Can I use NVMe drives?
Yes, the server supports NVMe drives via the PCIe expansion slots. You can install an NVMe SSD using an M.2 to PCIe adapter card.
How do I access the IPMI web interface?
Connect the dedicated IPMI LAN port to your network, assign an IP address via DHCP or static IP in the BIOS, then enter the IP address in a web browser. Default credentials: admin/admin.
What is the power consumption?
Typical power consumption is around 200-300W under normal load, with a maximum of 500W depending on configuration. The redundant power supplies are 80 PLUS Platinum rated for efficiency.
How do I clean the server?
Power down the server and disconnect cables. Use compressed air to blow dust from fans, heatsinks, and components. Avoid using liquids or vacuum cleaners. Clean the front air filter monthly.
User questions about SuperServer E403-9D-14CN-FN13TP Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperServer E403-9D-14CN-FN13TP - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperServer E403-9D-14CN-FN13TP by Supermicro.