PRO CV to MIDI - Uncategorized Kenton - Free user manual and instructions
Find the device manual for free PRO CV to MIDI Kenton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | CV to MIDI Converter |
| Brand | Kenton |
| Model | PRO CV to MIDI |
| Dimensions (approx.) | 120 x 70 x 40 mm |
| Weight | 200 g |
| Power Supply | 9V DC, center positive, 100 mA |
| Inputs | 2 x 3.5mm TS jack (CV & Gate) |
| Outputs | 5-pin DIN MIDI Out |
| CV Range | 0 to +10V, scalable |
| Gate Threshold | Adjustable, typically 1V |
| MIDI Channel | Selectable 1-16 |
| Pitch Tracking | 1V/Oct standard, user calibratable |
| Response Time | < 1 ms |
| Construction | Aluminum enclosure, black anodized |
| Cleaning | Wipe with dry, soft cloth |
| Safety | Low voltage device, no user-serviceable parts |
| Warranty | 1 year limited |
Frequently Asked Questions - PRO CV to MIDI Kenton
How do I power the PRO CV to MIDI?
Connect a 9V DC power supply with center positive polarity and at least 100 mA current. Plug it into the power jack on the rear panel.
What type of cables do I need for CV and Gate inputs?
Use standard 3.5mm mono TS cables (tip-sleeve). The CV input expects a 0-10V signal, and the Gate input expects a trigger or gate signal (typically 5-10V).
Can I adjust the CV scaling?
Yes, the unit features a trimmer for fine-tuning the 1V/Octave response. Refer to the manual for calibration procedure.
How do I select the MIDI channel?
Use the rotary switch on the front panel. Channels 1-16 are available. Set it before power-up or during operation (settings are stored).
What is the latency of the conversion?
The response time is under 1 millisecond, making it suitable for real-time performance.
Does it support velocity?
No, the PRO CV to MIDI does not convert velocity. It uses a fixed velocity value (default 100) for all notes. Gate on = note on, Gate off = note off.
Can I use it with modular synthesizers?
Yes, it is designed to interface with Eurorack and other modular systems. The inputs accept typical modular voltage levels (0-10V).
Does it work with 5V gate signals?
Yes, the gate threshold is adjustable via an internal trimmer. By default it triggers at around 1V, so 5V gates work fine.
What is the output MIDI format?
It outputs standard MIDI note on/off messages on the selected channel. Pitch Bend, Aftertouch, and CC are not generated.
Is the unit repairable?
The device has no user-serviceable parts. For any issues, contact Kenton support or an authorized service center. Do not open the enclosure.
User questions about PRO CV to MIDI Kenton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PRO CV to MIDI - Kenton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO CV to MIDI by Kenton.