75144835 - Home Automation HAGER - Free user manual and instructions
Find the device manual for free 75144835 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Home Automation Controller |
| Brand | Hager |
| Model | 75144835 |
| Dimensions (H x W x D) | 90 mm x 72 mm x 65 mm |
| Weight | 150 g |
| Power Supply | 230 V AC, 50 Hz |
| Power Consumption | < 5 W (standby) |
| Communication Protocol | KNX / Modbus / Ethernet |
| Mounting | DIN rail mount (4 modules) |
| Operating Temperature | -5°C to 45°C |
| IP Rating | IP20 |
| Main Functions | Control lighting, blinds, heating; integrate sensors and actuators; scheduling and remote access via app |
| Maintenance | Keep clean, avoid moisture; check connections periodically |
| Safety | Install by qualified electrician; disconnect power before servicing |
| Spare Parts & Repairability | Replaceable internal fuse; modular design allows component swap |
Frequently Asked Questions - 75144835 HAGER
How do I reset the Hager 75144835 to factory defaults?
Press and hold the reset button (located on the front panel) for 10 seconds until the LED blinks red. Release and wait for the device to reboot. This will erase all custom settings.
What communication protocols does the 75144835 support?
The device supports KNX, Modbus, and Ethernet for integration with smart home systems.
Can I control the device remotely?
Yes, via the Hager Home app (available for iOS and Android) or through your home network using a web interface. Ensure the device is connected to your router.
How many devices can be connected to one controller?
The Hager 75144835 can manage up to 64 actuators and 64 sensors, depending on bus load and configuration.
What is the maximum cable length for KNX bus?
The maximum cable length for the KNX bus is 1000 meters per segment, with a total of up to 4000 meters using repeaters.
Does the device require a neutral wire?
Yes, the 75144835 requires a neutral connection for proper operation. It is designed for standard 230V AC installations.
How do I update the firmware?
Download the latest firmware from the Hager website, then upload via the device's web interface under 'System > Firmware Update'. Do not power off during update.
What does the blinking LED indicate?
A steady green LED indicates normal operation. Blinking green means booting, red indicates an error (e.g., bus failure). Consult the manual for detailed LED codes.
Is the device compatible with Amazon Alexa or Google Home?
Yes, through the Hager Home skill for Alexa and Google Assistant integration. Ensure your controller is linked to the Hager cloud.
What should I do if the device is unresponsive?
First, check power and network connections. Then try a reset. If still unresponsive, contact Hager support with model and serial number.
User questions about 75144835 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Automation in PDF format for free! Find your manual 75144835 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 75144835 by HAGER.