PLAL 1 A1 - Work lamp PARKSIDE - Free user manual and instructions

Product Type	LED 360° Work Light
Brand	Parkside
Model	PLAL 1 A1 (HG05476-BS)
Intended Use	Indoor and outdoor illumination, private use only
Operating Voltage	230 V~, 50 Hz
Total Power Consumption	40 W
Protection Class	I
Degree of Protection (Spotlight)	IP54 (dust protected, splash-proof)
Degree of Protection (Socket)	IPX4 (splash-proof)
Socket Rating	Max. 2500 W total for 2 sockets
Dimensions (VDE/FR)	Approx. 190 mm diameter x 315 mm height
Dimensions (BS)	Approx. 220 mm diameter x 315 mm height
Weight (VDE/FR)	Max. 2700 g
Weight (BS)	Max. 2850 g
Projected Area	Approx. 350 x 200 mm
Parts Description	Spotlight, Hook, Switch, Plug, Socket Cover, Socket of Spotlight, Interlock (for BS model)
Scope of Delivery	1 LED 360° Work Light, 1 Instruction Manual
LED Replaceability	Non-replaceable by user; must be repaired by qualified electrician
Mounting	Fold-out hook for suspension
Cleaning	Wipe with a lint-free, slightly damp cloth and mild detergent; do not immerse
Warranty	3 years from date of purchase

Frequently Asked Questions - PLAL 1 A1 PARKSIDE

What is the intended use of the Parkside PLAL 1 A1 LED 360° Work Light?

The product is intended for illuminating indoor and outdoor areas. It is designed for private use only and not suitable for commercial applications.

What are the dimensions and weight of the work light?

For VDE/FR models: approx. 190 mm diameter x 315 mm height, weight max. 2700 g. For BS models: approx. 220 mm diameter x 315 mm height, weight max. 2850 g.

How do I mount or hang the work light?

The product includes a fold-out hook (item 2) that can be used to suspend the spotlight from a suitable suspension point. Ensure the substrate is stable.

What is the maximum power I can connect to the built-in socket?

The socket has a total maximum load of 2500 W for both sockets combined. Do not exceed this to avoid fire risk.

Is the work light suitable for outdoor use?

Yes, the spotlight has IP54 protection (dust protected and splash-proof). However, the sockets are only IPX4 (splash-proof) and require corresponding IPX4 plugs if used outdoors. For BS models, the plug is for indoor use only.

Can the LED be replaced if it fails?

No, the LEDs cannot be replaced by the end user. If they fail, the product must be repaired by a qualified electrician or the entire product must be replaced.

How do I clean the work light?

First, unplug the product and allow it to cool down. Clean with a lint-free, slightly damp cloth and mild cleaning agent. Never immerse the product in water or other liquids.

What safety precautions should I take before installation?

Always check the product and cable for damage. Disconnect the mains plug before installation. Ensure the mains voltage matches 230 V~, 50 Hz. Keep the product at least 1 m away from illuminated materials to prevent fire hazard.

What is covered under the warranty and how do I claim?

The warranty covers material and manufacturing defects for 3 years from purchase. Normal wear (e.g., batteries) and fragile parts are excluded. To claim, contact the service department (UK: 0800 404 7657, IE/NI: 1890 930 034) with proof of purchase and defect description.

What should I do if the mains cable is damaged?

The external flexible cable cannot be replaced. If the cord is damaged, the product shall be destroyed according to the manual to avoid electric shock risk.

USER MANUAL PLAL 1 A1 PARKSIDE

Exterior view of a Parkside water heater device (no text or symbols visible on body)

LED 360° WORK LIGHT PLAL 1 A1

GB IE NI

LED 360° WORK LIGHT

Operation and safety notes

A

List of pictograms used ...... Page 6

Introduction Page 6

Intended use.... Page 6

Parts description.... Page 6

Technical data Page 6

Scope of delivery.... Page 7

General safety instructions ...... Page 7

Before installation Page 8

Fixing the product Page 8

Use Page 8

Connect the plug with the socket of the spotlight.... Page 8

Cleaning and care Page 9

Disposal Page 9

Warranty Page 10

List of pictograms used
	Alternating current		* Plugs for indoor use only (for HG05476-BS only)!
	Dust Protected + Splash-proof (IP54) for LED work light (except mains sockets)		Protection class I
	Splash-proof (only mains sockets)		Product designed to withstand severe mechanical handling

LED 360° WORK LIGHT

● Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. The instructions for use are part of the product. They contain important information concerning safety, use and disposal. Before using the product, please familiarise yourself with all of the safety information and instructions for use. Only use the product as described and for the specified applications. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

Intended use

The product is intended to illuminate *indoor and outdoor areas. This product is only intended for private use and is not suitable for commercial use or for use in other applications.

Parts description

1 Spotlight
2 Hook
3 Switch
4 Plug
5 Socket cover
6 Socket of spotlight
7 Interlock (for HG05476-BS only)

- Technical data

Operating voltage: 230 V\~50 Hz

Total power

consumption: 40 W

Protection class: 1

Degree of protection: IP54 (splash-proof); IPX4 (for sockets of spotlight ONLY)

Socket: total max. 2500 W for 2 sockets.

Dimension: approx. 190 mm ∅ x 315 mm height (VDE/FR); approx. 220 mm ∅ x 315 mm height (BS)

Weight: max. 2700 g (VDE/FR), 2850 g (BS)

Projected area: approx. 350 x 200 mm

- Scope of delivery

Check immediately after unpacking that the parts are complete and that the product is in proper condition.

1 LED 360° Work Light
1 Instructions for use

General safety instructions

BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!

DANGER TO LIFE AND ACCIDENT HAZARD FOR TODDLERS AND SMALL CHILDREN!

Never leave children unattended with the packaging material. The packaging material represents a danger of suffocation. Children frequently underestimate the dangers. Please keep the product out of the reach of children at all times.

This product may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and/or knowledge, so long as they are supervised or instructed in the safe use of the product and understand the associated risks. Children should not be allowed to play with the product. Cleaning and user maintenance should not be performed by children without supervision.

⚠️DANGER OF SUFFOCATION! Children could swallow and choke on small included parts (e.g. screws). Keep children away from the work area during assembly.

This product does not contain any parts that can be serviced by the user. The LEDs cannot be replaced by end user.
If the LEDs fail at the end of their lives, they must be repaired by qualified electrician or the entire product must be replaced.
The external flexible cable or cord of this product cannot be replaced; if the cord is damaged, the product shall be destroyed.

Danger to life by electric shock

■ Always check the product for damage before connecting it to the mains. Never use the product if it shows any signs of damage.
- Protect the mains cable against sharp edges, mechanical stresses and hot surfaces.
■ Always unplug the mains plug from the socket before installation, dismantling or cleaning.
■ Disconnect the product from the mains supply if it is not going to be used for some time (e.g. holiday).

Prior to installation, verify that the mains voltage on site corresponds with the operating voltage required for the product (230 V\~, 50 Hz). Otherwise do not install the product.

CAUTION! DANGER OF BURN

INJURIES! To prevent burns, verify the product is switched off and has cooled down for at least 15 minutes before touching it. The product can become very hot.

The accessible surface, especially heat shrink, is very hot when the lamp is operating.

!

FIRE HAZARD! Fit the product so that it is at least 1 m away from the material to be illuminated. Excessive heat can result in a fire.

The product is only suited for use with the built-in LED control gear.
The product continues to draw a small amount of power even if the product is off as long as the product is connected to the supply mains. To switch the product off completely, disconnect the plug 4 from the socket.
The plug can only be connected with a corresponding socket with the same IP in order to keep the protective degree against dust/water. For HG05476-BS, plug for indoor use only.

● Before installation

NOTE: Remove all packaging materials from the product.

Place the spotlight on a stable substrate.
- Check the stability of the spotlight

● Fixing the product

Fold out the hook 2 to suspend the product from a suitable suspension point.

Use

Plug the plug into the socket.
- Push the switch to the I position to turn on the product.

i NOTES:

• Insert the plug to the corresponding IPX4 socket only during outdoor use.
  Or the plug should be for indoor use if no corresponding IPX4 socket can be found.

- Connect the plug with the socket of the spotlight

• Open the socket cover behind the product.
  ■ Connect an additional item by plugging it into the socket of the spotlight 6 (see fig.).
• Close the socket cover (for HG05476-BS).
  For HG05476-BS, lock with the interlock

NOTE: Make sure the connected item is equipped with water proof plug.

⚠ WARNING! Do not connect any appliance with a total output of > 2500 W. Otherwise there is the risk of a fire.

For HG05476/HG05476-FR:

The socket of the spotlight is only IPX4 protected.
- Insert only corresponding IPX4 plug for outdoor use.

⚠RISK OF ELECTRIC SHOCK! Water may enter the product if incorrect plug is used.

For HG05476-BS:

■ The socket is only IPX4 protected.
The socket can only protected from water when the cover is completely closed.
Water may enter the product if the cover is not corrected posited.

● Cleaning and care

■ Never immerse the product in water or other liquids. Otherwise the product can be damaged.

■ Remove the plug from the socket 6. Allow the product to cool down.

- Clean the product with a lint-free, slightly moist cloth and mild cleaning agent.

● Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1 - 7: plastics / 20 - 22: paper and fibreboard / 80 - 98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you.

The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.

You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

IE Service Ireland

NI Service Northern Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [e-mail]

CE

OWIM GmbH & Co. KG

Stiftsbergstraße 1

74167 Neckarsulm

GERMANY

Model No.:HG05476-BS

Version: 09/2019

IAN 327526_1904