ServerSwitchIQ SSIQ8-R2-I5-4SE - Security Camera Razberi - Free user manual and instructions
Find the device manual for free ServerSwitchIQ SSIQ8-R2-I5-4SE Razberi in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed PoE+ Network Switch with Embedded Server |
| Model | ServerSwitchIQ SSIQ8-R2-I5-4SE |
| Ports | 8 x Gigabit Ethernet PoE+ (802.3at), 4 x SFP+ Uplink |
| PoE Budget | 240W total |
| Processor | Intel Core i5 (4th Gen or newer) |
| Memory | 8 GB DDR3/DDR4 |
| Storage | 120 GB SSD (expandable) |
| Dimensions (W x D x H) | 17.3 x 10.5 x 1.7 inches (440 x 267 x 43 mm) |
| Weight | 7.5 lbs (3.4 kg) |
| Power Supply | Internal AC 100-240V, 50/60Hz, 300W |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Mounting | Rack mountable (1U) |
| Key Functions | IP camera management, video recording, NVR, PoE power, network switching |
| Software | Razberi ServerSwitchIQ OS with camera management and analytics |
| Compliance | FCC, CE, RoHS |
| Warranty | 2 years limited warranty |
Frequently Asked Questions - ServerSwitchIQ SSIQ8-R2-I5-4SE Razberi
What is the Razberi ServerSwitchIQ SSIQ8-R2-I5-4SE?
It is a managed PoE+ network switch with an integrated Intel Core i5 server designed for IP camera surveillance systems. It combines switching, recording, and camera management in one unit.
How many cameras can I connect to this switch?
The switch has 8 PoE+ ports (each up to 30W) and 4 SFP+ uplink ports. You can connect up to 8 IP cameras directly via PoE, and more via additional switches uplinked through the SFP+ ports.
Does the switch support Power over Ethernet (PoE)?
Yes, all 8 Gigabit Ethernet ports support PoE+ (IEEE 802.3at) with a total power budget of 240W, allowing you to power cameras without separate power supplies.
Can I use the ServerSwitchIQ as a standalone NVR?
Yes, the embedded Intel Core i5 processor and pre-installed Razberi software enable it to act as a network video recorder (NVR) with local storage and camera management capabilities.
What type of storage is included?
The unit comes with a 120 GB SSD for the operating system and video storage. An additional SATA slot or USB ports may allow expansion (check manual for details).
How do I reset the device to factory defaults?
Locate the reset pinhole on the front or rear panel. Press and hold for 10 seconds using a paperclip while the device is powered on. Release when the status LEDs flash.
What is the maximum power consumption?
The power supply is rated at 300W. Typical consumption depends on connected cameras and processing load, but total system consumption including PoE output is up to 300W.
Can I mount the switch in a server rack?
Yes, it is 1U rack mountable. The package includes rack ear brackets for standard 19-inch racks.
How do I access the web interface?
Connect a computer to one of the switch ports. By default, the switch obtains an IP via DHCP. Use the IP address shown on the front panel LCD (if available) or use the Razberi Discovery Tool to find the device. Then open a browser and log in with default credentials (admin/admin).
What should I do if a PoE port stops powering a camera?
First, check the camera cable and ensure it is not damaged. Then verify the total PoE budget isn't exceeded. You can also try restarting the port via the web interface or unplugging and replugging the camera. If the issue persists, contact Razberi support.
User questions about ServerSwitchIQ SSIQ8-R2-I5-4SE Razberi
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual ServerSwitchIQ SSIQ8-R2-I5-4SE - Razberi and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ServerSwitchIQ SSIQ8-R2-I5-4SE by Razberi.