Apollo MFAB70NB/WB - Air-conditioner MIDEA - Free user manual and instructions
Find the device manual for free Apollo MFAB70NB/WB MIDEA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Midea |
| Model | Apollo MFAB70NB/WB |
| Cooling Capacity (BTU) | 7,000 BTU |
| Coverage Area | Up to 250 sq. ft. |
| Dimensions (W x D x H) | 17.5 x 15.5 x 28.5 in |
| Weight | 65 lbs |
| Power Supply | 115V / 60Hz |
| Energy Efficiency Ratio (EER) | 11.0 |
| Noise Level (dB) | 52 dB (High), 45 dB (Low) |
| Main Functions | Cool, Fan, Dry (Dehumidifier) |
| Remote Control | Yes, with LCD display |
| Timer | 24-hour programmable timer |
| Filter Type | Washable, reusable mesh filter |
| Drainage | Self-evaporating system; manual drainage for high humidity |
| Installation | Window kit included (slide-out panel) |
| Safety Features | Overload protection, auto-restart after power failure |
| Maintenance | Clean filter every 2 weeks; drain water when needed |
| Spare Parts / Repairability | Replacement filters and remote available; service by qualified technician |
| General Information | R32 refrigerant, Energy Star certified |
Frequently Asked Questions - Apollo MFAB70NB/WB MIDEA
How do I clean the air filter?
Turn off and unplug the unit. Open the front grille and remove the filter. Wash with warm water and mild soap, let dry completely, then reinstall. Clean every two weeks for optimal performance.
What does error code E1 mean?
Error E1 indicates a temperature sensor malfunction. Unplug the unit for 5 minutes, then restart. If the error persists, contact Midea support.
Why is my air conditioner not cooling?
Check if the filter is dirty (clean it). Ensure windows and doors are closed. Verify the unit is in Cool mode and the set temperature is lower than room temperature.
How do I set the timer?
Press the Timer button on the remote or control panel. Use +/- to set the desired hours (1-24). Press Timer again to confirm. The unit will turn off after the set time.
Do I need to drain water?
In normal operation, the unit self-evaporates. In very humid conditions, the internal tank may fill. When the Full Water indicator lights, turn off the unit, remove the drain plug at the back, and drain water into a pan.
What is the ideal temperature setting?
For energy efficiency and comfort, set the thermostat to 72-78°F (22-26°C). Each degree higher can save up to 3% on cooling costs.
Can I use an extension cord?
It is not recommended. Plug directly into a dedicated 115V outlet. Extension cords may overheat and cause a fire hazard.
How do I use the Dehumidifier function?
Press the Mode button until the Dry indicator appears. The fan will run at low speed, and the unit will remove moisture without active cooling. Drain water as needed.
Why is water leaking from the unit?
Check if the drain plug is loose or missing. Ensure the unit is level. The drain hose may be kinked. If using continuous drainage, verify the hose is not blocked.
How do I reset the unit?
Unplug the power cord from the outlet. Wait 10 minutes, then plug it back in. This resets the control board. If issues continue, consult the manual or contact service.
User questions about Apollo MFAB70NB/WB MIDEA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual Apollo MFAB70NB/WB - MIDEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Apollo MFAB70NB/WB by MIDEA.