KM0550C - Media player Krüger&Matz - Free user manual and instructions

Product Type	Multimedia Player
Brand	Krüger&Matz
Model	KM0550C
Dimensions (approx.)	12 x 8 x 3 cm
Weight (approx.)	300 g
Power Supply	USB 5V or DC 5V adapter
Video Output	HDMI, AV
Audio Output	HDMI, AV, 3.5mm jack
Media Playback	Video, Audio, Photo
Supported Video Formats	MP4, AVI, MKV, MOV, etc.
Supported Audio Formats	MP3, WMA, AAC, FLAC, etc.
Supported Photo Formats	JPEG, PNG, BMP, GIF
Storage Media	USB flash drive, SD/MMC card
Remote Control	Included (IR)
Care and Cleaning	Wipe with dry cloth; avoid liquids
Safety Precautions	Keep away from water, heat, and children
Spare Parts / Repairability	Remote, adapter available; user serviceable parts: none
General Information	Compact media player for home entertainment

Frequently Asked Questions - KM0550C Krüger&Matz

How do I connect the KM0550C to my TV?

Use an HDMI cable to connect the player's HDMI port to your TV's HDMI input. Alternatively, you can use the AV output with a composite cable.

What video formats does the KM0550C support?

It supports common formats like MP4, AVI, MKV, MOV, WMV, and others. Refer to the manual for a complete list.

Why is my remote control not working?

Ensure the batteries are installed correctly and are fresh. Point the remote directly at the player's IR sensor. Remove any obstacles. If still not working, try resetting the player.

How do I reset the KM0550C?

Press and hold the Reset button (located on the bottom or back) with a paperclip for 5 seconds. This will restore factory settings.

Can I play audio files from a USB drive?

Yes, insert a USB drive with music files (MP3, WMA, FLAC, etc.) into the USB port. Navigate using the remote to select and play tracks.

How do I update the firmware?

Check the Krüger&Matz website for firmware updates. Download the file, copy it to a USB drive, insert into the player, and follow the update procedure in the settings menu.

What should I do if the player freezes?

Try disconnecting the power for 10 seconds, then reconnect. If the issue persists, perform a factory reset using the reset button.

Does the KM0550C support subtitles?

Yes, it supports SRT and SSA subtitle files. Ensure the subtitle file has the same name as the video and is placed in the same folder.

Can I use a SD card with the player?

Yes, insert an SD or MMC card into the card slot. Supported formats include FAT32. The player will automatically detect the card.

How do I clean the KM0550C?

Use a soft, dry cloth to gently wipe the exterior. Do not use any liquids or harsh chemicals. Ensure the device is unplugged before cleaning.

USER MANUAL KM0550C Krüger&Matz

Completely black image with no visible content, text, or symbols.

Completely blank white image with no visible content, text, or symbols.

Line drawing of a battery pack with an open lid and internal components (no text or symbols)

BEDIENUNG

TV System [TV System]

Read the instruction manual carefully before first use and keep it for future reference. Producer is not responsible for damages caused by inappropriate handling and use of the device.

The lightning flash with arrowhead symbol, within an equilateral triangle is indicated to alert the user the presence of uninsulated, dangerous voltage, within the product enclosure that may be of sufficient magnitude to constitute risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance.

• Before connecting the device to power supply socket, make sure the voltage indicated on the appliance corresponds to the voltage in the power supply socket.
• Make sure to place this device on flat, dry and stable surface.
• Protect this device from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
• Product suitable for indoor use only.
• Disconnect the device from the power supply if it is not going to be used for a long time.
• Protect power cord from harp edges and other factors which could lead to its damage.
• When you disconnect the power cord of the device, grasp and pull the plug, not the cord/cable.
• Place the device in a properly ventilated place.
• Do not block or cover slots, holes or openings on the product by placing on soft furnishings such as carpets, rugs or beds as these are provided for functionality and/or ventilation to ensure safe operation of the product.
• Do not place heavy objects on the device.

• Do not use this device if it has been damaged or its operation is abnormal.

• Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for check-up/repair.

• This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner, and all the safety precautions are understood and followed. Children should not play with this device. Children should not perform cleaning and servicing of the device unsupervised.
• Fixed power cable may only be replaced in an authorized service point.
  • ALWAYS disconnect this device from power supply mains before cleaning.
• Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

PRODUCT DESCRIPTION

Front panel

1. USB port
2. Display

3. Previous channel

4. Next channel

5. Power button

Back panel

1. Antenna input
2. Coaxial output

3. HDMI output

4. SCART output

5. Power cord

REMOTE CONTROL

1. Power button

2. Previous file/track

3. Fast rewind

4. Next file/track

5. Fast forward

6. Play

7. Pause

8. Record

9. Stop

10. Red button (USB): Media Player

11. Green button (SUBTITLE): enable subtitles

12. Blue button (AUDIO): language settings

13. Yellow button (TTX)

14. EPG (Electronic Program Guide)

15. Program Info

16. OK button

17. Volume increase/decrease button

18. Next/previous channel

19. Menu button

20. Exit/back button

21. FAV button

22. Volume increase/decrease button

23. Next/previous channel

24. Mute button

25. Number keys

26. TV/RADIO button

27. RECALL button (previous channel)

Programmable buttons

A. TV On/Off

B. AV/TV button

C. TV volume decrease button

D. TV volume increase button

E. SET button

PROGRAMMING TV CONTROL BUTTONS

1. Place the tuner remote and the TV remote towards each other, at around 4 cm.
2. Press and hold the SET button, until red LED glows stronger.
3. On the tuner remote, press one of the programmable buttons (placed in TV CONTROL frame)
4. Press the corresponding button on the TV remote a couple of times.
5. After successful paring the red LED will flash twice.
6. Press the SET button to exit pairing mode.
7. The function is assigned to the button. If the button doesn't work, try repeating steps above.

CONNECTING TO THE TV

» To get standard resolution, connect the device to the TV with SCART cable.
» To get high resolution, connect the device to the TV with HDMI cable.

graph TD
    A["Antenna"] --> B["HDMI cable"]
    B --> C["TV"]
    C --> D["Power supply"]
    D --> E["SCART cable"]
    E --> F["Device with antenna"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333
    style F fill:#ffc,stroke:#333

INSTALLATION OF BATTERIES

1. Open the battery compartment.
2. Insert 2x AAA batteries with correct polarization (+/-).
3. Close the battery compartment.

Notes:

• Do not mix the batteries.
• Remove the batteries if the remote control is not going to be used for an extended period of time.

- Do not place the remote control under the direct sunlight or near sources of excessive heat.

- Point the remote control to the unit no more than 8 meters from the remote control sensor and within 30^ horizontally and 30^ vertically of the front of the unit.

Line drawing of a battery pack with two batteries and a lid, showing internal components (no text or symbols)

OPERATION

1. Press the MENU button to enter main menu screen.
2. Use navigation buttons to navigate the menu and adjust the settings.
3. Press the MENU button to return to the previous menu or press the EXIT button to quit the menu screen.

QUICK INSTALLATION

If the receiver is being powered on for the first time or factory settings were restored, the welcome screen will appear on the TV screen.

» Region: Select a country.
» Language: Select language.
» Display Mode: Select a screen resolution.
» Aspect Mode: Select aspect ratio of the screen.
» OK: Press OK to start automatic channel scan.

INSTALLATION

» Auto Channels Scan: Automatic searching and saving available TV channels.
» Manual Channels Scan: Manual searching for TV channels. You can search the channel by number or frequency. When you choose the desired options, press Search to start searching.
» LCN (Logical Channel Number): Choose this option, if you want to sort the channels according to their logical channel number.

CHANNEL MENU

TV Channel List: Editing channel lists by locking, deleting, skipping, moving channels and creating favorite channel lists.

To preview the channel, select it and press OK.

1. Adding a channel to favorites

» Select a channel and press the FAV button on he remote control. Press the OK button to display lists of favorites.

» Choose the list and press the OK button. Then press the EXIT button to confirm changes. The selected channel will be saved in that list (it is now marked with a heart icon).

» Use left and right buttons on the remote control to switch between channel lists. To delete channel from the favorite list, select the channel, press the FAV button and then press the OK button. Favorite channel list will be displayed. Press the OK button again. Exit the menu to confirm the changes. The channel will be deleted from the favorite list.

1. Locking channel

Select a channel and press the red button on the remote control. Press the OK button and input the default password 0000. The channel will be marked with a lock icon. Press the EXIT button to confirm changes. The selected channel will be locked. If you want to unlock the channel, select this channel, press the red button and press OK to enter the password

1. Skip channel

Select a channel and press the green button. Press the OK button. The channel will be marked with an arrow icon. Press the EXIT button to confirm changes. The selected channel will be skipped during switching channels. To disable skipping, select this channel, press the green button and confirm by pressing the OK button.

1. Moving channel

Select a channel and press the yellow button. Press the OK button. The channel will be marked with an icon. Use the up and down buttons on the remote to move the channel, press the OK button. To confirm new position for the channel, press the EXIT button.

Note: If you want to move channels to a new position, the LCN option should be OFF.

1. Editing channels

Select a channel and press the blue button. New options will appear:

» Sort: Press the red button, and select sorting method.

» Edit: Press the green button, then the OK button. Now you can change the name of the channel. Press the yellow button to confirm.

» Delete: Press the blue button, then the OK button. The channel will be marked with an X icon. Press the EXIT button to confirm changes.

Radio Channel List: Edits the Radio Channel List.

Delete All: Opens a warning window. If you choose Yes, all channels will be deleted.

TOOLS

Information

Displays information about the device.

Factory Settings

Deletes channels and user settings.

Upgrade by USB

Copy the latest firmware to a USB stick. Do not rename the file of firmware and do not put it into a folder. In standby mode, insert the USB stick to the USB port of the receiver and press the Standby button on the remote control. The message "USB Disk A Connected" will appear on the TV screen. Press Menu, then Tools, select Upgrade by USB and press the OK button. In this window select Upgrade Mode "AllCode". At the option below "Upgrade File", choose the latest firmware that is copied to the USB stick. Below, there is the option Start. Press OK and the upgrade process will start. After a few seconds, the process will be completed and the receiver will restart automatically.

After the upgrade, confirm the version of the new firmware by going to the Information menu.

Note: If the upgrade process does not start, use USB stick in FAT32 format.

Auto Standby

Set after what time the receiver will automatically enter the Standby Mode.

SYSTEM SETUP

Language: Select the language of the menu, first and second audio and teletext.

TV System

» Video Resolution: Select resolution of the TV. If you are using the HDMI connection, the default is 1080i_25. If you are using the SCART connection, the default value is 576i.

» Aspect Mode: Select aspect ratio of the TV.

» Digital Audio Output: Available options: BS Out or LPCM Out. The default value is LPCM Out.

Display settings:

» Brightness (default value is 50)
» Contrast (default value is 50)
» Saturation (default value is 50)
» Hue (default value is 50)
» Sharpness (default value is 5)

Local time setting

» Region: Select your country.
» GMT Usage: Set to "By Region" if you want to use GMT and set the time automatically. Set to "User Define" if you want to set the time zone manually, or set to "Off", if you want to set the date and time manually. The default value is "By Region".

» GMT Offset: Set the time zone (only if "GMT Usage" is set to "User Define").

» Date: Set the date (only if "GMT Usage" is set to "Off").
» Time: Set the time (only if "GMT Usage is set to "Off").

Timer Setting

» Timer Mode: Set the time interval: Once, Daily or Off.
» Timer Service: When it is set to PVR, the receiver will switch to the preset channel, at preset date
» and time and start recording the program. When is set to Channel, the receiver will switch to the preset channel at preset date and time.
» Wake up channel: Set the channel.
» Wake up date: Set the date.
» On Time: Set the start time.
» Duration: Set the duration of displaying or recording a channel.

Note: It is also possible to set the Timer from EPG menu (see EPG section).

Parental lock (Some firmware versions do not support this function)

» Menu Lock: When this is enabled, the access to channel edition and searching menu, will be protected by a password. Default value is Off.
» Rating Lock: Set the age.
» New Password: Enter new password.
» Confirm Password: Confirm the new password.

Note: Default Password is 0000. In case of forgetting set password, input code 3327 to access the parental lock menu.

OSD Setting

» OSD Timeout: Select the duration of displaying Info bar, from 1 to 10 seconds. The default value is 5.
» OSD Transparency: Set the OSD transparency to Off, or from 10% to 40%. The default value is Off.

Favorite

Press OK on a Favorite Group to rename the Favorite Channels List.

Other

» Antenna power: Set to ON if you have an active antenna without power adapter. Set to OFF if you have passive antenna or active antenna with power adapter. The default value is OFF.
» Channel Play Type: Available options: Scrambled, All and Free. The default value is All.
» Beeper: The default value is Off.
» AD Service: The default value is Off.
» Use AD as default: It is activated when the AD Service is On.
» AD Volume Offset: It is activated when the AD Service is On.

MEDIA PLAYER/PVR

PVR

» Switch: Press 1 on the remote control to switch between the PVR, Music, Image and Video.
» Sort: Press 2 on the remote control to sort the channels by name, time, size and favorite. The option Sort is activated in Music, Image and Video.
» Repeat: Press 3 on the remote control to select the repeat options. This option is activated in Music and Video.
» Setup: Press 3 on the remote control to set the Slide Show Time and Slide Show Repeat. This option is activated in Image.
» MultiView: Press 4 on the remote control to display the grid view of pictures. This option is activated in Image.
» Play list: Press the RED button on the remote control. The picture and video will be put into play list. This option is activated in Image and Music.
» FAV: Press the OK button to set the favorite media files. This option is activated in Image and Music.
» FAV All: Display all favorite media list. This option is activated in Image and Music.
» Edit: Press Blue button to edit the name of media.

Note: When watching a video with subtitles from USB drive, it is possible to change the settings of subtitles by pressing the green button.

PVR Storage Information

Displays information about the USB drive.

PVR Settings

» Timeshift: The default value is OFF.

» Jump: Available options are: 30 sec, 1 min, 5 min, 10 min or 30 min.

» Timeshift to Record: It allows to record timeshift video.

Remove USB device safely

Select the connected USB drive and press the OK button to safely remove the USB drive.

TIMESHIFT

Timeshift function allows to stop and rewind TV programs if the USB drive is connected to the USB port of the device.

1. Make sure the USB drive is connected to the device.
2. Enter PVR Settings and turn ON Timeshift function
3. Press PAUSE button on the remote control to stop the program.
4. Control playback with the buttons on the remote control:
   » Press left and right arrows to choose a starting point of playback, then confirm by pressing the OK button.
   » Press PAUSE to pause playback.
   » Press REV and FWD to rewind or fast-forward playback.
   » Press STOP to stop timeshift and continue to watch the program.

Notes:

» It is recommended to use USB drive in 2.0 standard. USB drives with low parameters may not be compatible with the device.

» Large capacity USB drives may require external power supply.

RECORDING

1. Make sure the USB drive is connected to the device.
2. While watching a program, press the REC button on the remote control to start recording (press the REC button twice to change the default recording time).
3. To stop the recording, press the STOP button on the remote control. Confirmation window will appear. Select [OK] to stop recording or [NO] to continue recording.
4. Recordings will be saved on the USB drive and are available in the Media Player.

Note: Use the Timer function or EPG to schedule a recording.

EPG (ELECTRONIC PROGRAM GUIDE)

1. Press the EPG button on the remote control to enter Electronic Program Guide.
2. Use direction buttons on the remote control to navigate the menu.
3. Press the Timer button to enter the PVR schedule menu.

TROUBLESHOOTING

Problem Possible reason	Possible solution
LED indicator is not on Power adapter is disconnected		Check the connection of power adapter
No signal Antenna is disconnected Check antenna connection
No image or sound Improper mode has been selected on the TV		Choose proper mode on the TV
Information that the channel is coded / unavailable	Coded / unavailable channel	Choose another channel
Remote control does not work	The device is turned off Turn on the device
	The remote control is not pointed at the device	Point the remote control at the device no more than 8 meters from the remote control sensor and within 30° horizontally and 30° vertically of the front of the unit
	There are obstacles between the remote control and the device	Make sure there are no obstacles between the remote control and the device
	The batteries are discharged	Replace the batteries with the new ones
Forgotten channel password	-	Delete locked channel and scan channels again
When the device is moved to another room, there is no signal	Antenna connection in new place may be different (lower signal strength resulting in weaker channel reception or no signal)	Check antenna connection or connect amplifier to the antenna

SPECIFICATION

MAIN FEATURES

LED display

Fully compliant with DVB-T2/DVB-T

Automatic/manual scan

Software update, media playback and PVR by USB 2.0 port

7 days EPG

Timeshift

Multilanguage menu

PVR schedule recording

Signal strength and quality display

LCN (Logical Channel Number)

TV channels preview

Parental control

Timer

Teletext

Favorite channel list

SYSTEM

CPU: Ali 3822P

Internal memory: 32 Mb

RAM: 512 MB DDR3

Input impedance: 75 Ohm

Video resolution: 1920x1080 px

Video format: Auto, 16:9, 4:3 LB, 4:3 PS

Video decoding: MPEG-2, MPEG-4, H.264, H.265

Supported formats: H.264, HEVC, MP3, MP4, MKV, JPEG, AVI

Audio decoding: MPEG-1 Layer I/II, MPEG-2 layer I/II, AAC, AAC+/HE-AAC/AC3,Dolby plus

File system: FAT32, NTFS

TV TUNER

Input frequency range: (VHF) 170\~230 MHz; (UHF) 470\~862 MHz

Demodulation: QPSK, 16QAM, 64QAM, 256QAM

Band: 7 MHz, 8 MHz

INPUT/OUTPUT

SCART

HDMI (576I/P, 720I/P, 1080I/P)

USB 2.0

1x IEC connector (ANT IN)

Coaxial

POWER SUPPLY

Input voltage: 110-240 V; 50/60 Hz

Remote control: 2x AAA battery

Power consumption: Max. 6 W

Power consumption in standby mode: Max. 1 W

PHYSICAL PARAMETERS

Dimensions: 150 x 86 x 32 mm

Power cord length: 1,1 m

Weight: 226 g

IN SET

Remote control, user' manual

English

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.

Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.

KWESTIE BEZPIECZEŃSTWA

Line drawing of a battery pack with two batteries and one open lid (no text or symbols)

OBSŁUGA

Line drawing of a battery pack with an open lid and three batteries inside (no text or symbols)

EXPLOATARE

INSTALLATION (INSTALARE)

EDIT CHANNEL (EDITARE CANAL)

Upgrade by USB (Actualizare prin USB)

SYSTEM SETUP (SETĂRI SISTEM)

Formate acceptate: H.264, HEVC, MP3, MP4, MKV, JPEG, AVI

Decodare audio: MPEG-1 Layer I/II, MPEG-2 layer I/II, AAC, AAC+/HE-AAC/AC3,Dolby plus

Fisier sistem: FAT32, NTFS

TUNER TV

Frecventa de intrare: (VHF) 170\~230 MHz; (UHF) 470\~862 MHz

Demodulare: QPSK, 16QAM, 64QAM, 256QAM

www.krugermatz.com

Krüger&Matz is a registered trademark