Aveo Engineering

Posistrobe Titania - Lighting Aveo Engineering - Free user manual and instructions

Find the device manual for free Posistrobe Titania Aveo Engineering in PDF.

📄 11 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Aveo Engineering Posistrobe Titania - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED Position/Strobe Light
Brand Aveo Engineering
Model Posistrobe Titania
Category Lighting
Dimensions (L x W x H) 2.5 x 1.5 x 1.0 inches (63.5 x 38.1 x 25.4 mm)
Weight 3.2 oz (90 g)
Power Source DC 12-24V
Power Consumption 2.5W typical
Light Source LED
Light Color Red/Green/White (selectable)
Beam Angle 120° horizontal, 60° vertical
Mounting Type Screw-mount base
Waterproof Rating IP67
Operating Temperature -40°F to 185°F (-40°C to 85°C)
Certifications FAA TSO C96a, ETSO C96a
Warranty 2 years
Cleaning Instructions Wipe with a damp, soft cloth. Do not use solvents.
Safety Warnings Avoid impact; ensure proper voltage; disconnect power before installation.
Spare Parts Availability Contact Aveo Engineering for replacement parts.

Frequently Asked Questions - Posistrobe Titania Aveo Engineering

How do I install the Posistrobe Titania?
Mount the light using the included hardware on a suitable surface. Connect the power wires to a 12-24V DC supply, observing polarity. Ensure the unit is securely fastened to prevent vibration.
What power supply is required?
The Posistrobe Titania operates on 12-24V DC. Use a regulated power source within this range to avoid damage.
What are the available light modes?
The light offers steady and flash modes, with selectable colors (red, green, white). Consult the manual for mode switching via the power cycle sequence.
Is the light waterproof?
Yes, it has an IP67 rating, meaning it is dust-tight and can withstand immersion in 1 meter of water for 30 minutes.
Can I use this light on my boat?
Yes, it is suitable for marine use. However, ensure compliance with local navigation lighting regulations.
How do I clean the lens?
Clean with a damp, soft cloth. Avoid abrasive cleaners or chemicals that may damage the lens.
What is the expected lifespan of the LED?
The LED is rated for 50,000 hours of operation under normal conditions.
Does the light have a built-in battery?
No, it requires an external DC power source. It does not include internal batteries.
Is the Posistrobe Titania FAA-approved?
Yes, it is certified under FAA TSO C96a and ETSO C96a for aircraft use.
What is the warranty period?
Aveo Engineering provides a 2-year warranty against manufacturing defects. Contact their support for claims.

User questions about Posistrobe Titania Aveo Engineering

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual Posistrobe Titania - Aveo Engineering and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Posistrobe Titania by Aveo Engineering.

USER MANUAL Posistrobe Titania Aveo Engineering

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Aveo Engineering

Model : Posistrobe Titania

Category : Lighting