BLAUPUNKT FHD401 - Heating

FHD401 - Heating BLAUPUNKT - Free user manual and instructions

Find the device manual for free FHD401 BLAUPUNKT in PDF.

📄 84 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice BLAUPUNKT FHD401 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Fan Heater
Dimensions (approx.) 20 x 15 x 30 cm (7.9 x 5.9 x 11.8 in)
Weight (approx.) 2 kg (4.4 lbs)
Power Supply 220-240 V ~ 50 Hz
Power Consumption 2000 W (max)
Heating Settings 2 heat levels + fan-only mode
Thermostat Adjustable thermostat
Safety Features Overheat protection, tip-over switch, thermal fuse
Maintenance Clean with dry cloth; do not immerse in water
Spare Parts Contact Blaupunkt customer service
Repairability Consult a qualified technician for repairs
Brand Blaupunkt
Model FHD401

Frequently Asked Questions - FHD401 BLAUPUNKT

How do I set the desired temperature?
Turn the thermostat knob to your preferred temperature. The heater will maintain the room at that level. Refer to the thermostat section in the manual for details.
Can I use the FHD401 in a bathroom?
No, the FHD401 is not designed for bathroom use. It does not have IP protection against water splashes. Keep it away from moisture.
What should I do if the heater does not turn on?
Check the power cord and plug, ensure the outlet works, and verify the power switch is on. If it still doesn't work, contact customer support.
How do I clean the heater?
Unplug the heater and clean the exterior with a soft, dry cloth. Do not use water or chemicals. Regularly vacuum the air intake to remove dust.
Can I leave the heater unattended?
It is not recommended to leave the heater unattended for long periods. Always turn it off when leaving the room or sleeping. The tip-over switch provides some safety.
How do I reset the heater after overheating?
If the heater shuts off due to overheating, unplug it and let it cool for at least 10 minutes. Check for blocked air vents. Plug it back in and turn it on; it should reset automatically.
Is the FHD401 energy efficient?
The FHD401 has two heat settings and a thermostat to help manage energy use. For best efficiency, set the thermostat to a comfortable level and ensure the room is well-insulated.
How can I store the heater when not in use?
Allow the heater to cool completely. Clean it, wrap the cord, and store in a dry, dust-free place. Avoid placing heavy objects on top.
What is the noise level of the FHD401?
The FHD401 operates quietly with a gentle fan sound. Noise levels are typical for a fan heater and should not be disruptive.
Does the FHD401 have a warranty?
Yes, Blaupunkt offers a standard warranty. Check your purchase documents or contact Blaupunkt support for details on coverage and duration.

User questions about FHD401 BLAUPUNKT

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual FHD401 - BLAUPUNKT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FHD401 by BLAUPUNKT.

USER MANUAL FHD401 BLAUPUNKT

natural_image Black Xiaomi Bluetooth device with visible grille and control panel (no text or symbols on body)

Enjoy it.

EN: This product is only suitable for well-insulated spaces or occasional use.

Information requirement for the electric local space heaters
Model identifier(s):PTC-2011R
Item Symbol Value UnitItem Unit
Heat outputType of heat input, for electric storage local space heaters only (select one)
Nominal heat output Pnom 2,0 kWmanual heat charge control, with integrated thermostat[no]
Minimum heat output (indicative)Pmin 1,0 kWmanual heat charge control with room and/or outdoor temperature feedback[no]
Maximum continuous heat outputPmax,c 2,0 kWelectronic heat charge control with room and/or outdoor temperature feedback[no]
Auxiliary electricity consumptionfan assisted heat output [no]
At nominal heat outputelmax 0,000 kWType of heat output/room temperature control (select one)
At minimum heat outputelmin0,000 kWsingle stage heat output and no room temperature control[no]
In standby modeeISB0,001 kWTwo or more manual stages, no room temperature control[no]
with mechanic thermostat room temperature control[no]
with electronic room temperature control[yes]
electronic room temperature control plus day timer[no]
electronic room temperature control plusweek timer[no]
Other control options (multiple selections possible)
room temperature control, with presence detection[no]
room temperature control, with open window detection[no]
with distance control option[no]
with adaptive start control [no]
with working time limitation[no]
with black bulb sensor[no]
Contact details

IMPORTANT NOTES

- Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.

• This device is for domestic use only. Do not use for any other purposes.

- The device should only be connected to an socket with values corresponding to the values on the rating label.

- It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.

- If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards. Do not let cord hang over edge of counter, or touch any hot surface.

- The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.

- Before maintenance work always disconnect the unit from the power supply.

- When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.

- Damage to the power cord or plug can lead to an electrocution hazard.

- Never leave the product connected to the power source without supervision.

- Never put the power cable, the plug or the whole device into the water or any other liquids. The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.

- Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.

- This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment.

• Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.

• Children of less than 3 years should be kept away unless continuously supervised.

- Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

• Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.

- Never use the product close to combustibles.

- Never expose the product to atmospheric conditions such as

direct sun light or rain, etc... Never use the product in humid conditions (like bathroom or camping house).☒

- The power cable should be periodically checked for damage.

- If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it. All the repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user.

- Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.

- Notice: Do not cover the device or obstruct air inlets or outlets of the heater.

- Do not use in rooms below 6 ~m^2 .

- Do not use in areas with increased humidity, bathrooms, showers etc.

• Remember to maintain a 50 cm distance from furniture, curtains or other objects when using the heater.

- Heater can operate only in vertical position.

• Always switch off the heater before removing the plug from the socket.

- WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on

their own, unless constant supervision is provided.

- Do not insert objects through the safety grill or the air inlets.

- This product is only suitable for well-insulated spaces or occasional use.

- Do not use this heater if it has been dropped.

- Do not use if there are visible signs of damage to the heater. Place the heater on a horizontal and stable surface or, if available, fasten it to the wall.

- WARNING: To reduce the risk of fire, keep textiles, curtains or other flammable materials at least 1 m away from the hot air outlet.

- The heater must not be placed directly under an electrical outlet.

- Do not use the heater in the immediate vicinity of a bath, shower or swimming pool.

- CAUTION: Some parts of this unit may become very hot and cause burns when touched. Special care should be taken if children and vulnerable persons are present.

Device is compliant with EU directives:

- Low voltage directive (LVD)

- Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

BLAUPUNKT FHD401 - IMPORTANT NOTES - 1

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

BLAUPUNKT FHD401 - IMPORTANT NOTES - 2

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

TECHNICAL DATA

Voltage: 220-240V\~50-60Hz

Power: 2000W

1. Control panel1c. + and - buttons
1a. On/Off button2. Display
1b. M button (setting operation3. Air outlet grilles
mode when pressed briefly, setting4. Remote control
timer when pressed longer)

OPERATING INSTRUCTIONS

Once the unit is connected to the power source, the heater will go into standby mode. The on/off button will be illuminated. To start the heater, press the on/off button. To change the operating mode press the M button. Each press changes the operation mode:

  • 1 dot: cold airflow (only the fan is running)
  • 2 dots: warm air (1000 W)
  • 3 dots: hot blast (2000 W).

To set the expected temperature between 16-37°C, press the + and - buttons.

The heater has a delayed timer function. To set the timer, hold down the M button for a long time (5 seconds), then use the + and - buttons to set the time after which the device should switch off (maximum 9 hours).

The display switches off (reduces light intensity) after 60 seconds.

CLEANING AND MAINTENANCE

Before cleaning the heater make sure that it has been switched off, unplugged from the power socket. Make sure the device has cooled down sufficiently.

Air inlets and outlets should be free of dust. Clean with dump cloth and wipe dry.

REMOTE CONTROL

Remote control should be facing the screen. Receiver is placed on the side of the screen. If remote control will be used from side of the product, it may not work.

02-801 Warsaw, Poland

phone: +48 22 688 08 00

e-mail: info@everpol.pl

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. 00 48 22 688 08 33

E-mail: sda@blaupunkt.pl

All rights reserved. All brand names are registered trademarks of their

respective owners. Specifications are subject to change without prior notice.

Enjoy it.

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : BLAUPUNKT

Model : FHD401

Category : Heating