Brutus BRX52 - Loudspeaker Hifonics - Free user manual and instructions

Product Type	Car Audio Coaxial Speaker
Model Number	Brutus BRX52
Brand	Hifonics
Speaker Size	5.25 inches (13 cm)
Power Handling (RMS)	60 Watts
Power Handling (Peak)	120 Watts
Impedance	4 Ohms
Frequency Response	50 Hz – 20 kHz
Sensitivity	90 dB @ 1W/1m
Mounting Depth	Approx. 50 mm (2 inches)
Mounting Cutout Diameter	Approx. 120 mm (4.7 inches)
Magnet Type	Ferrite
Cone Material	Injected Polypropylene
Tweeter Type	Piezoelectric or Soft Dome
Terminal Type	Spring-loaded or Push-type
Installation Location	Door panels, rear deck, kick panels
Polarity	Positive (+) and Negative (-) terminals marked
Wiring	Direct connection to amplifier or head unit
Included Accessories	Speaker grilles, mounting hardware, wire connectors
Compliance	CE, RoHS

Frequently Asked Questions - Brutus BRX52 Hifonics

How do I install the Hifonics Brutus BRX52 speakers?

Choose a mounting location with minimal obstruction. Ensure proper clearance behind the mounting surface. Securely mount the speaker to the door panel or rear deck, avoiding gaps. Pay attention to correct polarity (+ and -) for all connections.

What is the recommended amplifier for the BRX52?

Use an amplifier that delivers between 30-80 Watts RMS per channel at 4 ohms for optimal performance. Do not exceed the speaker's power handling.

Can I use the BRX52 in a marine environment?

The BRX52 is designed for car audio use. It is not rated for marine or outdoor exposure. Avoid moisture and extreme temperatures.

How do I connect the BRX52 to a 4-channel amplifier?

Connect each speaker to its own channel, ensuring polarity matches (+ to +, - to -). Use high-quality speaker wire and avoid grounding the terminals to the vehicle chassis.

What is the difference between BRX52 and BRX5.2C?

The BRX52 is a coaxial speaker with a built-in tweeter and crossover. The BRX5.2C is a component system with separate midbass, tweeter, and external crossover for improved sound staging.

How do I clean the BRX52 speakers?

Wipe the grille and outer surfaces with a soft, dry cloth. Do not use harsh chemicals or water near the cone or tweeter.

Can I adjust the tweeter level on the BRX52?

No, the BRX52 is a coaxial speaker with a fixed crossover. For adjustable tweeter attenuation, consider a component system like the BRX5.2C.

What is the warranty on Hifonics speakers?

Hifonics typically offers a 1-year warranty from the date of purchase. Keep your receipt and register the product if required.

Are the BRX52 speakers compatible with factory head units?

Yes, they can be used with factory head units, but for best performance, use an external amplifier. The impedance is 4 ohms, matching most factory systems.

How do I avoid damaging the speakers during installation?

Handle components gently, avoid forcing them into tight spaces, and ensure no obstructions behind the mounting location. Tighten screws evenly and do not overtighten.

USER MANUAL Brutus BRX52 Hifonics

BRX42

BRX52

BRX62

BRX5.2C

BRX6.2C

EINBAUHINWEISE

The first step of installing a speaker system is thorough planning. Choose a suitable location for your speaker components carefully. Follow these suggestions to ensure proper imaging and maximum performance:

1. Choose a location that offers the least amount of obstruction between the components and your ears. Pay also attention to the position of the seats, headrests and other constructional systems in the interior space of the car.
2. Try to mount the speakers on the same arrangement. They should be installed at the same height and directly across from each other. Do not mount one speaker higher, lower, further forward or further backward from the opposite speaker.
3. The tweeter should always be installed as close as possible to the midbass speaker.
4. Always take a look behind the chosen mounting locations to ensure that there is proper clearance for the rearside of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.
5. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speaker deck. There should be no gaps between the speaker basket and the mounting surface
6. Please handle the components with care, otherwise they will get damaged.
7. Please pay attention to the correct polarity (+ or -) for all terminals and connections.
8. Never connect the speakers to the electrical ground or with the body of the vehicle.

INTERCONNECTION BRX5.2C, BRX6.2C

IMPORTANT:

Please pay attention to the correct polarity (+ or -)

for all terminals and connections.

TWEETER ATTENUATION BRX5.2C, BRX6.2C

Optional:

Cut the transparent cable loop on the tweeter crossover for a tweeter attenuation of -3dB. If you want a tweeter attenuation of -6dB, you also have to cut through the red cable loop.

INTERCONNECTION BRX42, BRX52, BRX62

IMPORTANT:

Please pay attention to the correct polarity (+ or -) for all terminals and connections.

HIFONICS

Brutus

SERIES

Audio Design GmbH

Am Breilingsweg 3 · D-76709 Kronau/Germany

Tel. +49 7253 - 9465-0 · Fax +49 7253 - 946510

www.audiodesign.de · www.hifonics.de

© Audio Design GmbH, All Rights Reserved