CFP 13W - Vibratory plate Norton Clipper - Free user manual and instructions
Find the device manual for free CFP 13W Norton Clipper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Vibratory Plate Compactor |
| Model | CFP 13W |
| Brand | Norton Clipper |
| Dimensions (L x W x H) | 600 x 400 x 900 mm (approx.) |
| Weight | 75 kg (approx.) |
| Engine Type | 4-stroke gasoline engine |
| Engine Power | 4.8 kW (6.5 HP) (typical) |
| Displacement | 163 cc (typical) |
| Fuel Tank Capacity | 3.6 L (approx.) |
| Centrifugal Force | 13 kN (approx.) |
| Operating Speed | 0-25 m/min (approx.) |
| Vibration Frequency | 6000 vpm (approx.) |
| Plate Size (Base) | 500 x 400 mm (approx.) |
| Drive | Forward and reverse via belt |
| Start Type | Recoil start |
| Lubrication | Engine oil (SAE 10W-30 recommended) |
| Water System | Optional water tank for dust suppression |
| Main Uses | Compaction of granular soils, asphalt, and paving stones |
| Safety Features | Engine kill switch, safety guard, anti-vibration handles |
| Maintenance | Regular oil changes, air filter cleaning, spark plug check |
| Spare Parts Availability | Air filters, oil filters, spark plugs, vibro pads, belts |
| Standard Accessories | Fuel can, oil bottle, tool kit, manual |
Frequently Asked Questions - CFP 13W Norton Clipper
How do I start the Norton Clipper CFP 13W vibratory plate?
Ensure the fuel valve is open, choke is set, and the throttle is in the start position. Pull the recoil starter cord firmly. Once started, slowly adjust choke and throttle to operating speed.
What type of engine oil should I use?
Use SAE 10W-30 engine oil for general temperatures. Check oil level before each use and change after first 20 hours, then every 50 hours.
How do I maintain the air filter?
Clean the foam air filter every 10 hours of operation. Wash in soapy water, dry, and re-oil lightly. Replace if damaged.
What is the centrifugal force of the CFP 13W?
The CFP 13W delivers approximately 13 kN of centrifugal force, suitable for compacting granular soils and asphalt patching.
Can I use the vibratory plate on asphalt?
Yes, it is designed for asphalt compaction. Ensure the base plate is clean and use water mist if available to prevent sticking.
How do I change the vibro pads?
Remove the bolts securing the old pads, install new ones (see manual for torque specs) and tighten evenly. Check for wear every 50 hours.
What safety precautions should I take?
Always wear hearing protection, safety glasses, and sturdy boots. Keep hands away from moving parts. Shut off engine before refueling or maintenance.
Why does my plate vibrator not move forward?
Check the belt tension and condition. A loose or worn belt can reduce drive. Also ensure the throttle is open enough and the vibration mechanism is engaged.
How do I store the CFP 13W long term?
Drain fuel from tank and carburetor, change oil, clean the unit, and store in a dry place. Remove spark plug and add a tablespoon of oil to cylinder.
Where can I find spare parts?
Norton Clipper authorized dealers or online retailers. Common parts include air filters (no. 123456), oil filters, vibro pads, and belts. Refer to manual for part numbers.
User questions about CFP 13W Norton Clipper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vibratory plate in PDF format for free! Find your manual CFP 13W - Norton Clipper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CFP 13W by Norton Clipper.