QW-NA26F39DW-ES - Dishwasher SHARP - Free user manual and instructions
Find the device manual for free QW-NA26F39DW-ES SHARP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Sharp |
| Model | QW-NA26F39DW-ES |
| Energy Class | A+ |
| Number of Place Settings | 13 |
| Dimensions (W x H x D) | 60 x 85 x 60 cm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Power Consumption | 1900 W |
| Water Consumption per Cycle | 10 L |
| Noise Level | 46 dB(A) |
| Wash Programs | Eco, Intensive, Normal, Quick, Glass, Pre-rinse |
| Special Features | Half Load, Delayed Start (1-24h), Child Lock |
| Drying System | Condenser Drying |
| Safety Features | Anti-flood system, Overheating protection |
| Maintenance | Clean filters and spray arms regularly |
| Spare Parts Availability | Yes, through authorized service centers |
| Repairability Index | High (standard components) |
Frequently Asked Questions - QW-NA26F39DW-ES SHARP
How do I install the dishwasher?
Ensure a level surface near water and power supply. Connect the inlet hose to a cold water tap (¾ inch), attach the drain hose to a standpipe or sink drain, and plug into a grounded outlet. Refer to the manual for detailed steps.
What are the available wash programs?
The dishwasher offers 6 programs: Eco (energy-saving), Intensive (heavy soil), Normal (daily), Quick (light load, short cycle), Glass (delicate items), and Pre-rinse (to rinse before main wash).
How do I use the delayed start feature?
Press the Delayed Start button repeatedly to set a delay from 1 to 24 hours. Close the door and the cycle will begin after the set time. For example, if you set 3 hours, it starts in 3 hours.
What should I do if the dishwasher doesn't start?
Check that the door is fully closed and latched. Ensure the power cord is plugged in and the circuit breaker is on. Also verify that the water supply valve is open. If still not starting, try resetting by unplugging for 10 seconds.
How do I clean the dishwasher filters?
Remove the lower rack and unscrew the filter assembly (cylindrical and micro filter). Rinse under running water to remove debris. Do not use abrasive cleaners. Reassemble and tighten properly. Clean monthly.
Why is there water left inside after a cycle?
A small amount of water in the filter area or sump is normal. If excessive, check that the drain hose is not kinked or blocked. Also ensure the drain pump filter is clean.
Can I use regular dish soap?
No, only use dishwasher-specific detergent (powder, gel, or tablets). Regular dish soap creates excess suds and can damage the machine. Also use rinse aid for better drying.
How do I reset the dishwasher?
Press and hold the Start/Reset button for 3 seconds to cancel a running cycle. If the machine is unresponsive, turn off the power at the mains for 30 seconds, then turn back on.
What does the child lock do and how do I activate it?
The child lock prevents accidental button presses. Activate by pressing and holding the Child Lock button (often with a key icon) for 3 seconds until the indicator lights up. Repeat to disable.
Where can I find spare parts?
Contact Sharp's authorized service partners via the official website or call the helpline listed in the manual. Provide the model number QW-NA26F39DW-ES for correct parts.
User questions about QW-NA26F39DW-ES SHARP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual QW-NA26F39DW-ES - SHARP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. QW-NA26F39DW-ES by SHARP.