Revolution XT 6 - Pregnant TANNOY - Free user manual and instructions
Find the device manual for free Revolution XT 6 TANNOY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bookshelf Speaker |
| Brand | Tannoy |
| Model | Revolution XT 6 |
| Drive Units | 6.5" Dual Concentric |
| Frequency Response | 42 Hz – 30 kHz |
| Sensitivity | 88 dB (2.83V @ 1m) |
| Impedance | 8 ohms |
| Recommended Amplifier Power | 30 – 150 W |
| Crossover Frequency | 1.6 kHz |
| Enclosure Type | Bass-reflex with front port |
| Dimensions (H x W x D) | 400 x 250 x 300 mm |
| Weight | 9.5 kg (each) |
| Finishes | Walnut, Black Oak, White |
| Features | Dual Concentric driver, high-frequency waveguide, rigid cabinet construction |
| Care Instructions | Wipe with a soft dry cloth; do not use solvents |
| Safety Notes | Place on stable surface; keep away from moisture and heat sources |
| Spare Parts Availability | Contact Tannoy support or authorized dealers |
| Placement | Free-standing or on stands; allow at least 20 cm from rear wall for bass reflex |
Frequently Asked Questions - Revolution XT 6 TANNOY
How do I connect the speaker to my amplifier?
Use high-quality speaker cables. Connect the positive terminal of the amplifier to the red binding post on the speaker, and negative to black. Ensure tight connections and correct polarity for proper stereo imaging.
What is the recommended break-in period?
Allow 20-30 hours of moderate listening at normal volume levels. The speaker's suspension and driver components will settle, revealing smoother performance and deeper bass.
Can I use the Revolution XT 6 for home theater?
Yes, it works excellently as front or surround speakers. Pair with a subwoofer for extended low-frequency effects. Ensure receiver crossovers are set appropriately (around 60-80 Hz).
What is the Dual Concentric technology?
This proprietary Tannoy design places the tweeter at the acoustic center of the bass/mid cone, creating a single point source for coherent sound dispersion and natural imaging.
How should I clean the speaker?
Wipe the cabinet with a soft, dry microfibre cloth. For grilles, use a gentle brush or vacuum with a soft brush attachment. Avoid liquid cleaners or abrasive materials.
What is the warranty period?
Tannoy offers a standard 5-year warranty from date of purchase for passive speakers. Register your product online to validate coverage. Keep proof of purchase.
Can I bi-wire or bi-amp this speaker?
Yes, the speaker has two sets of binding posts with removable jumpers. For bi-wiring, remove jumpers and run separate cables from amplifier to each pair. For bi-amping, use two amplifier channels.
What stands do you recommend?
Use sturdy stands with a top plate matching the speaker's width (250 mm). Height around 600-650 mm to position tweeters at ear level. Fill stands with sand or lead shot for added stability.
Is the speaker magnetically shielded?
No, the Revolution XT 6 is not magnetically shielded. Keep it at least 30 cm away from CRT televisions or sensitive electronic equipment to avoid interference.
How do I troubleshoot if there is no sound?
Check speaker cable connections at both ends. Verify amplifier is powered on and source is playing. Ensure amplifier is not in mute or protection mode. Test with a known working speaker to isolate the issue.
User questions about Revolution XT 6 TANNOY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual Revolution XT 6 - TANNOY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Revolution XT 6 by TANNOY.