MX180 - Receiver MCINTOSH - Free user manual and instructions
Find the device manual for free MX180 MCINTOSH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Receiver |
| Brand | McIntosh |
| Model | MX180 |
| Dimensions (W x H x D) | 17.5 in x 7.5 in x 15 in (44.5 cm x 19 cm x 38.1 cm) |
| Weight | 30 lbs (13.6 kg) |
| Power Supply | 120V, 60 Hz (USA), 230V, 50 Hz (EU) |
| Power Output | 200 Watts per channel into 8 ohms |
| Inputs | 6 x RCA, 2 x XLR balanced, 1 x Phono (MM), 1 x USB |
| Outputs | 2 x RCA pre-out, 1 x XLR pre-out, 2 x subwoofer |
| Frequency Response | 20 Hz - 20 kHz (+/-0.5 dB) |
| Signal-to-Noise Ratio | 100 dB |
| Total Harmonic Distortion | <0.005% |
| Features | Power Guard™, Sentry Monitor™, gold-plated binding posts, IR remote control |
| Cleaning | Wipe with a soft, dry cloth; avoid solvents |
| Safety | Do not expose to water or heat; ensure proper ventilation |
| Spare Parts | Contact authorized McIntosh dealer for replacement parts |
| Repairability | Service should be performed by qualified technician only |
Frequently Asked Questions - MX180 MCINTOSH
How do I connect speakers to the MX180?
Use high-quality speaker cables and connect to the gold-plated binding posts on the rear panel, ensuring correct polarity (+/-).
Can I use a turntable with this receiver?
Yes, the MX180 has a dedicated Phono input for moving magnet (MM) cartridges.
What is Power Guard technology?
Power Guard is a patented McIntosh circuit that prevents speaker damage by automatically reducing gain when clipping is detected, ensuring clean output.
How do I clean the front panel?
Use a soft, dry microfiber cloth. Avoid water, alcohol, or abrasive cleaners to preserve the glass finish.
Does the MX180 have a headphone output?
Yes, a standard 1/4-inch headphone jack is located on the front panel.
Can I bi-amp my speakers?
The MX180 can be used with an external power amplifier for bi-amping if your speakers support it. Use pre-out connections.
How do I update the firmware?
Firmware updates are done via USB. Download the latest file from McIntosh’s website, copy to a FAT32 USB drive, and follow the manual’s procedure.
What is the recommended ventilation?
Allow at least 6 inches (15 cm) above and behind the unit. Do not place in a closed cabinet without airflow.
How do I reset to factory defaults?
With the unit off, press and hold the 'Power' and 'Menu' buttons simultaneously for 5 seconds until 'Reset' appears on display.
Where can I find replacement remote control?
Contact an authorized McIntosh dealer or order online using the part number HR085.
User questions about MX180 MCINTOSH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual MX180 - MCINTOSH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX180 by MCINTOSH.