Fanlight R620 LED - Air purifier HPM - Free user manual and instructions
Find the device manual for free Fanlight R620 LED HPM in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Air purifier with LED fanlight |
| Brand | HPM |
| Model | Fanlight R620 LED |
| Dimensions (H × W × D) | 43 × 25 × 25 cm |
| Weight | 2.8 kg |
| Power supply | 220–240 V ~ 50/60 Hz |
| Power consumption | 30 W (max) |
| Fan speed settings | 3 speeds (Low, Medium, High) |
| Coverage area | Up to 20 m² |
| Filtration system | Pre-filter + HEPA filter + activated carbon filter |
| Filter replacement indicator | Yes, indicator light |
| Airflow rate (CADR) | 100 m³/h |
| Noise level | 30–50 dB (depending on speed) |
| LED light modes | On/off, dimmable |
| Timer function | 1–8 hours |
| Auto mode | Yes, with air quality sensor |
| Control type | Touch panel on device |
| Safety features | Overheat protection, tip-over switch |
| Filter maintenance | Replace every 6–12 months; clean pre-filter monthly |
| Spare parts available | Replacement filters (HEPA + carbon) |
| Certifications | CE, RoHS |
Frequently Asked Questions - Fanlight R620 LED HPM
How often should I replace the filters in the HPM Fanlight R620 LED?
The pre-filter should be cleaned every month, while the HEPA and activated carbon filters should be replaced every 6 to 12 months depending on usage and air quality. The filter replacement indicator will alert you when it's time.
Can I use the LED light independently from the air purifier fan?
Yes, the LED light can be turned on or off independently. You can also dim the light if the model supports that feature.
What is the recommended room size for this air purifier?
The HPM Fanlight R620 LED is suitable for rooms up to 20 m² for optimal air purification performance.
How do I clean the pre-filter?
Turn off and unplug the device. Remove the front cover, take out the pre-filter, and gently vacuum it or wash it with water. Let it dry completely before reinstalling. Do not wash the HEPA filter.
Is the HPM Fanlight R620 LED safe to leave on overnight?
Yes, it is safe. The purifier has overheat protection and a tip-over switch. You can use the timer function to set it to turn off after a few hours or run it continuously on low speed, which is quiet for sleeping.
What does the auto mode do?
In auto mode, the air quality sensor measures the particle level in the room and automatically adjusts the fan speed to maintain clean air. The fan speed increases when pollution is detected and decreases when air is clean.
How noisy is the purifier on different speed settings?
On low speed, the noise level is around 30 dB (very quiet, suitable for sleeping). Medium speed is about 40 dB, and high speed is up to 50 dB, which is noticeable but not loud.
Can I use this air purifier in a room with pets?
Yes, it is effective for capturing pet dander, fur, and odors. Regular cleaning of the pre-filter is recommended to maintain performance.
What type of filter does the Fanlight R620 LED use?
It uses a three-stage filtration system: a washable pre-filter, a HEPA filter (captures 99.97% of particles as small as 0.3 microns), and an activated carbon filter to remove odors and VOCs.
Where can I purchase replacement filters for this model?
Replacement filters can be purchased from authorized HPM retailers or online stores. Always use genuine filters to ensure proper fit and performance.
User questions about Fanlight R620 LED HPM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air purifier in PDF format for free! Find your manual Fanlight R620 LED - HPM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fanlight R620 LED by HPM.