Series FOUR - Uncategorized SOUNDCRAFT - Free user manual and instructions
Find the device manual for free Series FOUR SOUNDCRAFT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio Mixing Console |
| Brand | Soundcraft |
| Model | Series FOUR |
| Number of Channels | 4 Mono + 2 Stereo |
| Inputs | 4 XLR/TRS Combo, 2 Stereo RCA |
| Outputs | 2 Main XLR, 2 Monitor TRS, 2 AUX sends, Headphone 1/4" |
| Frequency Response | 20 Hz - 20 kHz ±0.5 dB |
| Dimensions (W x D x H) | 300 x 250 x 80 mm |
| Weight | 2.5 kg |
| Power Consumption | 25 W |
| Power Supply | External 12V DC adapter |
| Phantom Power | +48V switchable per channel |
| EQ | 2-band (High/Low) per channel |
| Aux Sends | 2 pre-fader |
| Main Output | Balanced XLR, Level control |
| Headphone Output | 1/4" stereo, dedicated volume |
| Construction | Steel chassis, plastic knobs |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Included Accessories | Power adapter, User manual |
| Optional Accessories | Rack mount kit, carrying case |
| Warranty | 1 year limited |
Frequently Asked Questions - Series FOUR SOUNDCRAFT
How do I connect a microphone to the Series FOUR?
Connect your microphone to any of the XLR/TRS combo inputs using an XLR cable. Ensure phantom power is enabled if using a condenser microphone by pressing the +48V switch for that channel.
Why is there no sound coming from the speakers?
Check that the main mix fader is up, the channel fader is not at minimum, and the mute button is not engaged. Also verify that the output cables are connected to the Main Out jacks and that your speakers are powered on.
Can I use the Series FOUR with a computer?
The Series FOUR does not have a built-in USB interface. To record to a computer, connect the Main Out or Record Out to an external audio interface using balanced TRS cables.
How do I adjust the EQ on the Series FOUR?
Each channel has a 2-band EQ with High (treble) and Low (bass) knobs. Turn clockwise to boost, counterclockwise to cut. Use moderate adjustments for clear sound.
What is phantom power and when should I use it?
Phantom power (+48V) is required for condenser microphones. It is available per channel via the +48V switch. Do not enable phantom power for dynamic microphones or ribbon mics to avoid damage.
How do I connect external effects?
Use the AUX sends (1 or 2) to route signal to an effects unit. Connect the AUX output to the effect input, and return the effect output to a stereo return or an available channel input.
Can I monitor through headphones while recording?
Yes, plug headphones into the headphone jack on the front panel. Adjust the Phones volume control. The headphone signal is typically the same as the main mix unless a separate monitor mix is set.
How do I clean the mixer?
Disconnect power. Use a soft, dry cloth to wipe the surface. For stubborn dirt, lightly dampen the cloth with water or a mild cleaning solution. Avoid getting liquid into the faders or knobs.
What should I do if a channel is not working?
First, check the channel fader and mute button. Swap the cable or source to another channel to isolate the problem. If the issue persists, the channel may need service. Consult the user manual or contact support.
Is the Series FOUR rack-mountable?
The Series FOUR is designed as a desktop unit. Optional rack mount kit (sold separately) allows installation in a standard 19-inch rack, taking up 3U of space.
User questions about Series FOUR SOUNDCRAFT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Series FOUR - SOUNDCRAFT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Series FOUR by SOUNDCRAFT.