Xone:3D - Uncategorized ALLEN & HEATH - Free user manual and instructions
Find the device manual for free Xone:3D ALLEN & HEATH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional DJ Mixer with Audio Interface |
| Brand | Allen & Heath |
| Model | Xone:3D |
| Channels | 4 Stereo Channels (6 Inputs) |
| Equalizer | 3-Band EQ per Channel (High, Mid, Low) |
| Built-in Effects | Yes (Delay, Dub, Lo-Fi, etc.) |
| Audio Interface | USB 2.0, 4-In/4-Out |
| Crossfader | Replaceable VCA Crossfader |
| Dimensions (W x D x H) | 320mm x 380mm x 100mm |
| Weight | 5.5 kg |
| Power Supply | External 12V DC, 2A |
| Power Consumption | 20W |
| Frequency Response | 20 Hz – 20 kHz |
| Total Harmonic Distortion | < 0.01% |
| Signal-to-Noise Ratio | > 90 dB |
| Inputs | 4x Phono/Line (RCA), 2x Line (RCA), 2x Mic (XLR) |
| Outputs | 2x Master (XLR), 2x Booth (XLR), 1x Record (RCA), 1x Headphones |
| Headphone Output | 1/4" TRS Stereo, Level Control |
| Cleaning | Wipe with a dry, soft cloth. Do not use liquids or solvents. |
| Safety | Use only supplied power adapter. Do not expose to moisture. |
| Spare Parts | Contact Allen & Heath or authorized dealers for replacement parts. |
| Reparability | Designed for professional service. Refer to service manual. |
| General Information | User manual available for download on notice-facile.com |
Frequently Asked Questions - Xone:3D ALLEN & HEATH
How do I connect the Xone:3D to my computer?
Use a USB cable to connect the Xone:3D to your computer. It will appear as a 4-in/4-out audio interface. Drivers are not required for Mac OS X; for Windows, download the driver from the Allen & Heath website.
Can I use the Xone:3D without a computer?
Yes, the Xone:3D is a stand-alone DJ mixer. The USB connection is only needed for computer audio interface functions.
How do I replace the crossfader?
The crossfader is located on the front panel. Remove the faceplate screws, gently pull out the old crossfader, and insert a new one. Ensure it is seated properly before replacing the faceplate. Consult the service manual for detailed instructions.
What are the built-in effects and how do I use them?
The Xone:3D includes effects like Delay, Dub, Lo-Fi, and more. To use, select an effect using the 'Effect Select' knob, adjust the 'Effect Level' and 'Effect Time' knobs, and apply via the 'Effect Send' knob per channel.
How do I connect turntables with phono preamps?
Use the RCA inputs labeled 'Phono' for turntables with phono output. The Xone:3D has built-in phono preamps. For line-level sources, use the 'Line' inputs.
What is the maximum output impedance?
The XLR master outputs have a balanced output impedance of 100 ohms, suitable for professional audio equipment.
How do I clean the mixer?
Disconnect the power. Use a soft, dry or slightly damp cloth to wipe the surface. Do not use abrasive cleaners or solvents. For faders, use a dedicated contact cleaner sparingly.
Can I use the Xone:3D with a microphone?
Yes, there are two XLR microphone inputs with gain control. The mic signal is routed to the main mix and can be further processed via the effects sends.
What is the power supply requirement?
The Xone:3D requires a 12V DC, 2A power supply (center positive). Use only the supplied adapter or an equivalent certified PSU.
How do I update the firmware?
Check the Allen & Heath website for firmware updates. Download the updater tool and follow the instructions. Connect the mixer via USB and run the updater.
User questions about Xone:3D ALLEN & HEATH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Xone:3D - ALLEN & HEATH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Xone:3D by ALLEN & HEATH.