UPB-12K0-2U - Power bank Tripp Lite - Free user manual and instructions

Product Type	12,000mAh Dual-Port Mobile Power Bank
Brand	Tripp Lite
Model	UPB-12K0-2U
Battery Capacity	12,000mAh
Input	5V, 2A
Output USB 1	5V, 1A
Output USB 2	5V, 2A
Number of USB Ports	2
Ripple and Noise	≤180mVp-p
Efficiency	≥79.28%
Operating Temperature Range	32° to 113°F (0° to 45°C)
Storage Temperature Range	5° to 140°F (-15° to 60°C)
Color	White
Dimensions (L x W x H)	5.6 x 3.2 x 0.9 in. (141 x 81 x 23 mm)
Weight	0.7 lb. (0.32 kg)
Protection Features	Short circuit, over-voltage, over-current, over-charge, over-discharge
LED Indicators	4 battery level LEDs, automatic power saving
Built-in LED Flashlight	Yes, powered by button press
Included Cable	USB Micro-B cable, 3 ft.
Warranty	1-year limited
Compliance	FCC Class B, WEEE

Frequently Asked Questions - UPB-12K0-2U Tripp Lite

How long does it take to fully charge the UPB-12K0-2U power bank?

With a 5V, 2A input, the 12,000mAh battery typically takes 6-8 hours to fully charge. Actual time may vary based on the charger used.

Can I charge two devices simultaneously?

Yes, the UPB-12K0-2U has two USB ports: one provides up to 5V, 1A and the other up to 5V, 2A, allowing simultaneous charging of two devices at different speeds.

How do I check the remaining battery charge?

Press the button next to the 5V, 2A USB-A port once. The four LED indicators will illuminate to show the current battery level: 4 LEDs for 75-100%, 3 for 50-75%, 2 for 25-50%, 1 for 5-25%, and none for 0-5%.

What does the button do when held down?

Holding down the button turns off the LED indicators and stops any device charging, effectively putting the power bank into standby mode.

How do I turn on the built-in flashlight?

Press the button twice quickly to toggle the built-in LED flashlight on and off.

What safety protections does this power bank have?

The UPB-12K0-2U includes short circuit, over-voltage, over-current, over-charge, and over-discharge protection for safe and reliable charging.

Can I use any USB cable to charge devices?

Yes, you can use any standard USB-A cable compatible with your device. The included Micro-B cable is for charging the power bank itself. Optional cables include Lightning, USB-C, and Mini-B.

What should I do if the power bank stops working?

If the power bank enters protection mode (LEDs off, no charging), connect it to an external charger to replenish the battery and reset it. If problems persist, contact Tripp Lite support.

How often should I charge the power bank when not in use?

To maintain battery health, charge the UPB-12K0-2U at least every three months. Avoid storing it in temperatures above 140°F (60°C).

What is the warranty for this product?

The Tripp Lite UPB-12K0-2U comes with a 1-year limited warranty covering defects in materials and workmanship. Register the product at www.tripplite.com/warranty for faster service.

USER MANUAL UPB-12K0-2U Tripp Lite

12,000mAh Dual-Port Mobile Power Bank

Model: UPB-12K0-2U

PROTECT YOUR INVESTMENT!

Register your product for quicker service and ultimate peace of mind.

You could also win an ISOBAR6ULTRA surge protector—a \$50 value!

www.tripplite.com/warranty

Manufacturing Excellence.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Copyright © 2015 Tripp Lite. All rights reserved.

Product Features

• Charge multiple phones, tablets or other mobile devices without the need for a power outlet
• Sleek, low-profile design is perfect for portable use
• Dual USB ports provide up to 5V, 1A and 5V, 2A of power for simultaneous charging of mobile devices
• 12,000mAh capacity charges devices at maximum power draw for hours
• Four battery-power LED indicators show remaining battery capacity
  • Automatic power saving turns off LED indicators when not in use
• Includes a built-in LED flashlight
• Features short circuit, over-voltage, over-current, over-charge and over-discharge protection for safe and reliable charging

Package Includes

• UPB-12K0-2U
  • USB Micro-B Cable, 3 ft.
• Owner's Manual

System Requirements

• A smartphone, tablet or other mobile USB device

Optional Accessories

• U030-Series USB 2.0 A to 5-Pin Mini-B Cables
• U038-Series USB 2.0 A to USB Type-C Cables
• UR05C-Series Micro-B Charge-Only Cables
• M100-Series USB 2.0 A to Lightning™ Cables

USB Device Charging

Note:

• A button is located on the Mobile Power Bank next to the 5V, 2A USB-A port. When the button is pressed once, the LED indicators will illuminate to show how much battery capacity is left. When held down, the button turns off the LED indicators and stops any device charging taking place. When pressed twice, the button turns the built-in LED flashlight on/off.

• When charging a USB device, the LED indicators on the Mobile Power Bank will illuminate in one of four combinations to indicate the following battery capacity levels:

• 75-100% Capacity – 4 LEDs illuminated solid

• 50-75% Capacity – 3 LEDs illuminated solid
  • 25-50% Capacity – 2 LEDs illuminated solid
• 5-25% Capacity – 1 LED illuminated solid

• 0-5% Capacity – O LEDs illuminated

• Connect your mobile devices to the USB-A ports on the Mobile Power Bank using the included USB Micro-B cable or a USB cable suitable for your device.

• The device will begin charging with the LED indicator light(s) illuminating according to the combinations listed above.

Mobile Power Bank Charging

Note:

• A button is located on the Mobile Power Bank next to the 5V, 2A USB-A port. When the button is pressed once, the LED indicators will illuminate to show how much battery capacity is left. When held down, this button turns off the LED indicators and stops any device charging taking place. When pressed twice, the button turns the built-in LED flashlight on/off.

• When charging the Mobile Power Bank, its LED indicators will illuminate in one of five combinations to indicate the following battery capacity levels:

• 95-100% Capacity – 4 LEDs illuminated solid

• 75-95% Capacity – 3 LEDs illuminated solid, with the 4th LED flashing
• 50-75% Capacity – 2 LEDs illuminated solid, with the 3rd and 4th LEDs flashing
• 25-50% Capacity – 1 LED illuminated solid, with the 2nd, 3rd and 4th LEDs flashing

• 0-25% Capacity – 4 LEDs flashing

• Using the included USB Micro-B cable, connect the Micro-B port located on the Mobile Power Bank to the USB-A port on a computer or USB charger.

• The Mobile Power Bank will begin charging with the LED indicator lights illuminating according to the combinations listed above.

General Safety Instructions

• Make sure the Mobile Power Bank is fully charged prior to use.
• Use a cable suitable for your device when charging it from the Mobile Power Bank.
• When charging the Mobile Power Bank, it is recommended that you use the included USB Micro-B cable.
• Under condition of low battery, the LED lights will turn off while charging a device. Recharge the Mobile Power Bank as soon as possible to avoid shortening the battery life.
• The battery should be charged at least every three months to avoid shortening the battery life.
• It is recommended to disconnect a fully-charged device to avoid unnecessary Mobile Power Bank battery use.
• When the Mobile Power Bank enters protection mode (i.e. LEDs turn off and power bank will not charge) caused by issues such as a short circuit, use an external charger to replenish the charge and return it to normal operation.
• Keep the Mobile Power Bank away from fire and avoid temperatures above 140°F (60°C) when not in use or 113°F (45°C) when in use.
• Do not get the Mobile Power Bank wet or immerse it in water.
• Do not wash the Mobile Power Bank with corrosive cleaner.
• Do not squeeze or puncture the Mobile Power Bank so as to avoid electrolyte leakage of lithium-ion battery.
• Do not attempt to disassemble, modify or fix the Mobile Power Bank.
• Do not use a damaged cable or power charger to charge the Mobile Power Bank.
• Please recycle this device at an appointed disposal location for lithium ion batteries.

Specifications

Input 5V, 2A
Output USB 1: 5V, 1A / USB 2: 5V, 2A
Ripple and Noise ≤180mVp-p
Operating Temperature Range 32° to 113°F (0° to 45°C)
Storage Temperature Range 5° to 140°F (-15° to 60°C)
Color White
Dimensions [L x W x H] 5.6 x 3.2 x 0.9 in. (141 x 81 x 23 mm)
Weight 0.7 lb. (0.32 kg)
Over-current Protection Yes
Over-voltage Protection Yes
Over-charge Protection Yes
Over-discharge Protection Yes
Short Circuit Protection Yes
Efficiency ≥ 79.28%

Warranty and Product Registration

1-YEAR LIMITED WARRANTY

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE's obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

PRODUCT REGISTRATION

Visit www.triplite.com/warranty today to register your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Warranty and Product Registration

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user's authority to operate this equipment.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number. The series number should not be confused with the marketing name or model number of the product.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support