SK-CFS80 - Uncategorized Sevenoak - Free user manual and instructions

USER MANUAL SK-CFS80 Sevenoak

Support feet and tube fixer

Support feet and tube fixer

Camera mounting platform

Carbon fiber tubes and tripod mounting plate

80cm

Specifications

Maximum load capacity: 7kg

Overall length: 84cm

Effective working distance: 80cm

Carbon fiber outer diameter: 18mm

Material: Carbon fiber and Aluminum

Features

1. Carbon fiber and aluminum construction
2. Light weight and durable
3. Quiet and smooth movement
4. Removable rotating plate
5. Foldable supporting feet
6. Built-in screw socket on carbon fiber tubes
7. Built-in 1/4" and 3/8" threaded screw holes
8. Extendable with extra carbon fiber tubes

Limited One-year Warranty

Sevenoak provides a limited warranty that this product is free from defects in materials and workmanship to the original purchaser under normal use for a period of one (1) year from the original purchase date or thirty (30) days after replacement (the "Warranty Period"), whichever occurs later. Our responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at its option, of any product which fails during normal consumer use.

To obtain warranty coverage during the Warranty period, contact your place of purchase ("Seller") to obtain a return merchandise authorization ("RMA") number, and return to Seller the defective product along with proof of purchase and the RMA number.

This warranty does not extend to damage or failure which results from misuse, neglect, accident, alternation, abuse, improper installation or maintenance. Except as provided her ein, sevenoak makes neither any express warranties nor any implied warranties, including but not limited to any implied warranty of merchantability or fitness for a particular purpose. This warranty provides you with specific legal rights, and you may also have additional rights which vary from state to state.

Warnings

• Please read and follow these instructions, and keep this manual in a safe place.
• Handle the unit with care.
• Clean the unit with a soft, dry cloth.
• Use only parts provided by the manufacturer.
• Make sure everything is secure before proceeding.
• Make sure the item is intact and that there are no missing parts.
• Do not exceed the maximum load capacity.
• All photos are for illustrative purposes only.

Close-up of a black mechanical device with red connectors and a central square component (no visible text or symbols)

SK-CFS80

Compact Carbon Fiber Slider

Instruction:

1. Insert the camera mounting platform onto the carbon fiber tubes as shown in figure 2. If the camera mounting platform is not able to be inserted onto the tubes, unscrew the two screws on the rotating plate as shown in figure 1. Rotate the plate clockwise to ensure the tubes can go through, then rotate the plate counter-clockwise till the wheels and the tubes are in proper position, tighten the screws.

Note: The rotating plate on camera mounting platform is adjustable, and it is designed to adjust the position of the bearings on the rotating plate.

Rotating plate on camera mounting platform

Rotating plate on camera mounting platform

1. Loosen the locking screws on the support feet, unfold the legs, then tighten the lockings on the support feet again.

Liaosen the licking screws

Unfold the legs

1. Loosen the tube fixer locking screw as shown below, insert one of the tube fixer to one side of the tubes as shown below, then tighten the tube fixer locking screw.

Tube fixer locking screw

1. Loosen the tube fixer screw as shown below, insert the other tube fixer to the other side of the tubes as shown below, then tighten the tube fixer locking screw.

Tube fixer locking screw

1. Adjust the height/angle of the feet according to your desire, then fix the screws. You can add a tripod ball head (purchased separately) on to the camera mounting platform which will allow you to adjust the angle/position of the camera conveniently, then mount the camera onto the tripod ball head, it is ready to start shooting now.

Diagram showing a camera setup with labeled components including a camera, car, and mechanical parts

1. You can use SK-CFS80 standalone, or you can mount it on tripod or two tripods as shown below, you can even use it vertically as shown below.

Line drawings of two identical mechanical or optical surveying devices mounted on tripod-like bases, no text or symbols present.

Mount on a tripod
Mount on two tripods

Use it vertically

jiayz™

深圳市长丰影像器材有限公司