Mi Portable Flashlight - Flashlight Xiaomi - Free user manual and instructions

Product Type	Portable Flashlight
Brand	Xiaomi
Model	Mi Portable Flashlight
Light Source	LED
Brightness	Up to 400 lumens
Number of Modes	3 (High, Low, Strobe)
Battery Type	Lithium-ion rechargeable
Battery Capacity	1000 mAh
Charging Port	USB-C
Charging Time	Approximately 2 hours
Run Time (High Mode)	Up to 4 hours
Dimensions	110 x 28 x 28 mm
Weight	Approximately 100 g
Material	Aluminum alloy
Water Resistance	IPX4 (splash resistant)
Lamp Life	50,000 hours
Included Accessories	USB-C charging cable, user manual
Maintenance	Wipe with a dry cloth; avoid abrasive cleaners
Safety Features	Overheat protection, overcharge protection
Spare Parts Availability	Battery replacement kit available
Repairability	User replaceable battery (requires tools)

Frequently Asked Questions - Mi Portable Flashlight Xiaomi

How do I turn on the Xiaomi Mi Portable Flashlight?

Press and hold the power button for 1 second to turn on. Press again to cycle through modes: High, Low, Strobe.

How do I charge the flashlight?

Connect the included USB-C cable to the port on the flashlight and a USB power source. The LED indicator will show red while charging and green when fully charged.

What is the battery life of the Mi Portable Flashlight?

On high mode, it lasts up to 4 hours; on low mode, up to 20 hours. Actual life varies with usage.

Is the flashlight waterproof?

It has an IPX4 rating, meaning it is splash resistant but not submersible. Avoid using in heavy rain or underwater.

Can I replace the battery?

Yes, the battery is replaceable. Use a tool to open the casing and replace with a compatible 1000mAh lithium-ion battery.

How do I clean the flashlight?

Wipe the exterior with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and dry immediately. Avoid using chemicals.

Does the flashlight have a strobe mode?

Yes, it includes a strobe mode for emergencies or signaling. Cycle through modes by pressing the power button repeatedly.

What is the maximum brightness?

The maximum brightness is 400 lumens on high mode, suitable for outdoor activities and dark environments.

How do I know when the battery is low?

The LED indicator will flash red when the battery is low, and the flashlight may dim or turn off automatically.

Is the flashlight compatible with fast charging?

It supports standard 5V 1A charging via USB-C. Fast charging is not supported due to battery protection circuits.

USER MANUAL Mi Portable Flashlight Xiaomi

Before using the product, carefully read the user manual

1 - Function button; - in the universal battery mode: charge test/charge indicator. - in flashlight mode: turn off the flashlight/activate SOS mode.

2 - Micro USB port (input); 3 - USB connector (output); 4 - A place for fastening the strap.

Note: the function button is not an on/off button, the device automatically detects recharging / discharging, it does not need to press the button. After 2 minutes after discharge, the charge indicator turns off.

Features of the device

Security: The product has several levels of protection, easily responds to non-standard situations, which is the key to safe use.

High efficiency: The product has a specialized optical lens with a light transmission capacity of more than 85%. Built-in lithium battery with high energy density, 90% conversion efficiency is achieved at the board level.

Charging

Charge the flashlight by connecting the Xiaomi power adapter.

The ratio of indicators status and the level of charge of the product during recharging the following:

Level	Indicator color
0 - 20%	Flashes red
20 - 50%	Alternately flashes red and orange
50 - 99%	Alternately flashes orange and green
Full charge	Lights green
Charging fault	Fast flashes orange

Discharging

The charging of digital equipment takes place via a USB cable connection.

The ratio of indicators status and the level of charge of the product during discharging the following:

Level	Indicator color
Insufficient voltage	Fast flashes red
<20%	Flashes red
20 - 50%	Blinks orange
50 - 100%	Blinks green

Discharge mode with minimum current: while flashlight is not charging, short press twice the function button, the product goes into a low-current discharge mode, is used for continuous recharging of Bluetooth headphones, fitness trackers and other devices charged with a minimum current, LED indicator will alternately flash red, orange and green, reminding user, that the product is in the low current discharge mode. If you need to exit this mode, press the function button once.

The discharge mode with minimum current lasts 2 hours, after that time the device will automatically exit this mode.

Customer: Xiaomi Communication Technology Co., Ltd.

Manufacturer: Jiangsu Zimi Electronic Technology Co., Ltd (Xiaomi Eco-Chain Enterprise)

Address: A913, No. 159 Chengjiang Road, Jiangyin City

Support: www.mi.com/service

Hotline: 400 - 100 - 5678

Main parameters

Model:

Battery type:

Battery capacity:

Maximum charging voltage:

Rated temperature:

Dimensions:

Input:

Output:

Light source power:

Maximum luminous flux:

Full charge time:

LPB01ZM;

Lithium battery;

3250/3350 mAh 11,7/12,06 Wh (MIN/TYP) 3,6 V;

4,2 V;

0^ C 45^ C ;

120,2 × 25,5 × 25,5 mm;

5,0 V - 1,0 A;

5,0 V = 1,0 A;

3 W MAX;

240 Lm (TYP);

3,5 Hrs (power adaptor 5B/1A, standard charging cable).

Cautions

• Charge the product fully before using it for the first time. During the use of the product, to ensure its correct operation, turn on the screen of the digital device and check whether the charging icon is displayed.
• When charging the product, or using the product to recharge the digital equipment, select an appropriate type of cable by yourself.
• If, during the charging process of the digital device, all the LEDs on the product not lights, this indicates a low

level of charge of the product, charge the product as soon as possible.

• When a digital device is connected to a product, the digital device first uses the product charge.
  • After the digital device is fully charged, in order to avoid wear and tear, disconnect the cable in time.
• If, due to a short circuit or other reasons, the product goes into a safe mode (after the button and LED indicators are not lights), to restore the product, you must connect an external charger and charge the one.

Usage of the flashlight:

Rotate clockwise: turn off the flashlight/reduce the brightness.

Rotate counter-clockwise: turn on the flashlight/increase the brightness.

Two vertical rectangular blocks with horizontal lines and arrows indicating rotation, no text or symbols present.

Turning the flashlight on: quickly turn the top ring more than 3 divisions counter-clockwise.

Turning off the flashlight: turn the ring counter-clockwise, or press the function button.

SOS mode: press the function button 3 times.

Exit SOS mode: Press the function button 1 time.

Note: The functions of the flashlight and the universal battery can not be used at the same time. After turning on the flashlight, the universal battery function is turned off.

The flashlight has the function of reasonable temperature control, if the temperature is exceeded after a long period of time, the brightness of the light will automatically decrease to control the temperature.

The product contains a lithium battery, to prevent damage to it and to avoid other dangerous situations, do not disassemble the product itself.

It is forbidden for any reason to disassemble, compress, pierce, short-circuit the electrical contacts of the product,

immerse it in water, throw it into a fire or leave it in places with a temperature above 60 °C (140 °F).

Because the flashlight is too strong, to avoid damage to eyesight, do not allow children to play with the device and direct light into the eyes.

Toxic and harmful substances

Components	Harmful substances
	(Pb)	(Hg)	(Cd)	(Cr(VI))	(PBB)	(PBDE)
Circuit board	×	○	○	○	○	○
Battery	○	○	○	○	○	○
Housing	○	○	○	○	○	○
Gaskets, adhesive tape and other structural elements	○	○	○	○	○	○

This table is created in accordance with the provisions of the standard SJ / T 11364.

○: the content of this harmful substance in all homogeneous materials of this component is within the requirements of the standard GB / T 26572.

x: the content of this harmful substance in at least one of the homogeneous materials of this component exceeds the limits of the requirements of the standard GB / T 26572.