PAH 1300 A1 - Hammer POWERFIX - Free user manual and instructions

Product type	Rotary hammer
Brand	Powerfix
Model	PAH 1300 A1
Rated power	1300 W
Rated voltage	230 V ~ 50 Hz
Impact rate	3800 min⁻¹
Impact energy	15 J
Tool holder	SDS (Quick-change system)
Protection class	II (double insulation)
Sound pressure level (LpA)	87 dB(A) (uncertainty K=3 dB)
Sound power level (LWA)	98 dB(A) (uncertainty K=3 dB)
Vibration (main handle)	21.2 m/s² (K=1.5 m/s²)
Vibration (auxiliary handle)	22.7 m/s² (K=1.5 m/s²)
Supplied accessories	Rotary hammer, auxiliary handle, flat chisel, pointed chisel, transport case, instruction manual
Functions	Impulse and continuous operation, chisel position adjustment
Safety	Hearing protection and dust mask recommended, double insulation
Maintenance	Clean the tool holder regularly, lightly grease, clean housing with a dry cloth

Frequently Asked Questions - PAH 1300 A1 POWERFIX

How do I change the chisel on the PAH 1300 A1 hammer?

To change the chisel, pull the locking sleeve back, insert the new tool while turning it into the tool holder until it engages, then release the sleeve. Check the lock by pulling on the tool.

How do I use continuous operation mode?

To activate continuous mode, press and hold the ON/OFF switch, then press the locking switch to lock it in position. To stop, press the ON/OFF switch again.

What safety precautions should I take?

Always wear hearing protection, a dust mask, and safety glasses. Hold the tool by insulated gripping surfaces to avoid electric shock in case of contact with hidden cables.

How do I clean and maintain the hammer?

Before cleaning, turn off and unplug the device. Clean the housing with a dry cloth. Regularly clean the tool holder and lightly grease it before inserting a tool.

What type of tool holder is used?

The PAH 1300 A1 hammer is equipped with an SDS tool holder (Quick-change system) allowing quick and easy tool changes.

Is this hammer suitable for chiseling in concrete?

Yes, the intended use includes chiseling in concrete, stone, and plaster. It delivers an impact energy of 15 joules, making it effective for these materials.

What is the warranty period?

The warranty is 3 years from the date of purchase. It covers material and manufacturing defects. Keep the receipt as proof of purchase.

How do I adjust the auxiliary handle?

Loosen the knurled nut on the auxiliary handle, pivot it to the desired position (180° rotation possible), then tighten the nut.

Can I adjust the chisel position?

Yes, first insert the chisel into the tool holder, push the adjustment ring forward and turn the chisel to the desired position, then release the ring until it engages.

How do I contact customer service?

For France, call 0800 919270 or send an email to [e-mail]. Have your receipt and article number (IAN) ready.

USER MANUAL PAH 1300 A1 POWERFIX

ABBRUCHHAMMER / DEMOLITION HAMMER MARTEAU PERFORATEUR PAH 1300 A1

DE AT CH

ABBRUCHHAMMER

Translation of the original instructions

NL BE

SLOOPHAMER

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FR BE

GB/IE Translation of the original instructions Page 9

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

DEUTSCHLAND

www.kompernass.com

Depicted components 10

Package contents 10

Technical data 10

General Power Tool Safety Warnings ....11

1. Work area safety .... 1 1
2. Electrical safety 11
3. Personal safety 11
4. Power tool use and care 12
5. Service 12
   Appliance-specific safety instructions for hammers 12

Installation 13

Additional handle: 13
Fitting a tool: 13
Removing a tool: 13
Adjust chisel position: 13

Operation 13

Switching on and off 13

Maintenance and cleaning 13

Disposal....14

Kompernass Handels GmbH warranty 14

Service 15

Importer 15

Translation of the original Conformity Declaration 16

DEMOLITION HAMMER PAH 1300 A1

Introduction

Congratulations on the purchase of your new appliance. You have selected a high-quality product. The operating instructions are part of this product. They contain important information on safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the specified areas of application. Please also pass on these operating instructions to any future owner.

Intended use

The demolition hammer PAH 1300 A1 is suitable for chiselling into concrete, stone and plaster.

Any other usage of or modification to the appliance is deemed to be improper and carries a significant risk of accidents.

The manufacturer accepts no responsibility for damage(s) attributable to misuse.

The appliance is not intended for commercial use.

Depicted components

① Handle (rubberised grip)

② Locking switch

③ ON/OFF switch

4 Additional handle

5 Knurled nut for additional handle

6 Chisel adjustment ring

⑦ Tool holder

8 Locking collar

9 Pointed chisel

10 Flat chisel

Package contents

1 demolition hammer PAH 1300 A1

1 additional handle (pre-assembled)

1 flat chisel

1 pointed chisel

1 carrying case

1 set of operating instructions

Technical data

Nominal power: 1300 W

Rated voltage: 230 V \~ 50 Hz (alternating current)

Stroke rate: 3800 bpm

Impact energy: 15 Joules

Tool fitting: SDS MAX

Protection class: II / ☐ (double shielded)

Noise emission value:

Noise measurement value determined in accordance with EN 60745. The A-rated noise level of the power tool is typically as follows:

Chiselling:

Sound pressure level: L _pA = 87 dB (A)

Uncertainty K: 3 dB

Sound power level: L _WA = 98 dB (A)

Uncertainty K: 3 dB

Wear hearing protection!

Guaranteed sound power level LWA in dB.

Total vibration value:

Total vibration values (vector total of three directions) determined in accordance with EN 60745:

Main handle:

Chiselling: a_h(CHeq) = 21.2 m/s^2 , K = 1.5 m/ s^2

Auxiliary handle:

Chiselling: a_h(CHeq) = 22.7 m/s^2 , K = 1.5 m/s ^2

NOTE

The vibration level specified in these instructions has been measured in accordance with a standardised measuring procedure and can be used to make equipment comparisons. The specified vibration emission value can also be used to make an initial exposure estimate.

WARNING!

The vibration level varies in accordance with the use of the power tool and may be higher than the value specified in these instructions in some cases. Regular use of the electric tool in such a way may cause the user to underestimate the vibration. Try to keep the vibration loads as low as possible. Measures to reduce the vibration load are, e.g. wearing gloves and limiting the working time. Wherein all states of operation must be included (e.g. times when the power tool is switched off and times where the power tool is switched on but running without load).

General Power Tool Safety Warnings

WARNING!

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Appliance-specific safety instructions for hammers

■ Use the additional handles supplied with the appliance. Loss of control can lead to injuries.
■ Hold the appliance by the insulated handles when you are carrying out work during which the deployed tool may come into contact with concealed power cables or its own power cable. Contact with a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.

Wear a dust mask.

Installation

Additional handle:

You can position the additional handle as you wish.

♦ Undo the knurled nu5.

♦ Swing the additional handle ^4 around the appliance axis or 180° forward or backward into the desired position (see foldout page).

◆ Retighten the knurled nu5.

Fitting a tool:

◆ Pull the locking sleeve 8 backwards.

◆ Insert the tool with a rotating movement in the tool holder ⑦ until it clicks into itself.

Release the locking sleeve.

This locks the holder.

Check that the tool is properly locked by pulling it. The system has radial play because of the design.

Removing a tool:

◆ Pull the locking sleeve 8 backwards and pull the tool out of the tool holder 7

Adjust chisel position:

You can adjust the flat chise in optimal working position.

◆ Place the flat chise⑩ into the tool holder ⑦

♦ Push the chisel adjustment ring 6 forward and turn with the chisel adjustment ring 6 the flat chisel 10 the required position.

◆ Release the chisel adjustment ring ^5 and turn him until it clicks.

Operation

Switching on and off

During operation, you can choose between instantaneous and continuous operation.

Switching to instantaneous operation:

◆ Press the ON/OFF switch ^3 .

Switching off instantaneous operation:

◆ Release the ON/OFF switch ^3 .

Switching to continuous operation:

◆ Press the ON/OFF switch ③ and lock it in this position with the locking switch ②

Switching off continuous operation:

◆ Press the ON/OFF switch 3 and release it again.

Maintenance and cleaning

NING! RISK OF INJURY! Switch the appliance off and remove the power plug before starting any work on the appliance.

■ The appliance must always be kept clean, dry and free from oil or grease.

■ Use a soft, dry cloth to clean the housing.

■ Clean the tool holde⑦ regularly:

Before fitting a tool into the tool holde ^7 , grease it lightly.

WARNING!

If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard.

Disposal

ckaging is made from environmen- tally friendly material and can be dis- posed of at your local recycling plant.

dispose of power tools in your normal household waste!

European Directive 2012/19/EU requires that worn-out power tools be collected separately and recycled in an environmentally compatible manner.

Your local community or municipal authorities can provide information on how to dispose of the worn-out appliance.

This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions

The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase.

If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you at our discretion. This warranty service is dependent on you presenting the defective appliance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence.

If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects

The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries, baking moulds or parts made of glass.

The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.

This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications/repairs which have not been carried out by one of our authorised Service centres.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

■ Please have the till receipt and the item number (e.g. IAN 12345) available as proof of purchase.

■ You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

■ You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.

Service

GB Service Great Britain

Tel.: [phone] (£ 0.10/Min.)

E-Mail: [e-mail]

IE Service Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [e-mail]

IAN 285125

Importer

Please note that the following address is not the service address. Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

GERMANY

www.kompernass.com

Translation of the original Conformity Declaration

We, KOMPERNASS HANDELS GMBH, documents officer: Mr. Semi Uguzlu, BURGSTR. 21, DE - 44867 BOCHUM, Deutschland, hereby declare that this product complies with the following standards, normative documents and the EC directives:

Machinery Directive (2006/42/EC)

EMC (Electromagnetic Compatibility) (2014/30/EU)

RoHS Directive (2011/65/EU)*

* The manufacturer bears the full responsibility for compliance with this conformity declaration. The object of the declaration described above complies with the requirements of the Directive 2011/65/EU of the European Parliament and Council of 8 June 2011 on the limitations of use of certain dangerous substances in electrical and electronic appliances.

Noise Directive (2000/14/EC) (2005/88/EC)

Applied harmonised standards:

EN 60745-1:2009/A11:2010

EN 60745-2-6:2010

EN 55014-1:2006/A2:2011

EN 55014-2:2015

EN 61000-3-2:2014

EN 61000-3-3:2013

Type designation of machine:

Demolition hammer PAH 1300 A1

Year of manufacture: 01 - 2017

Serial number: IAN 285125

Bochum, 16/01/2017

CE

Semi Uguzlu

- Quality Manager -

The right to effect technical changes in the context of further development is reserved.

Sommaire

Introduction....18

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

ALLEMAGNE

www.kompernass.com

CE

Semi Uguzlu

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

DUITSLAND

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

NĚMECKO

www.kompernass.com

CE

Semi Uguzlu

- manažer kvality -

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

ALEMANIA

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

ALEMANHA

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

GERMANY

www.kompernass.com

Stand der Informationen · Last Information Update · Version des informations

Stand van de informatie · Stav informací · Estado de las informaciones