One Touch Evo 7 - Smartphone ALCATEL - Free user manual and instructions

USER MANUAL One Touch Evo 7 ALCATEL

Line drawing of a HP printer with front panel and paper clip (no text or symbols)

HP Color LaserJet Pro M479

User Guide

Copyright and License

© Copyright 2019 HP Development Company, L.P.

Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Edition 1, 4/2019

Trademark Credits

Adobe ^® , Adobe Photoshop ^® , Acrobat ^® , and PostScript ^® are trademarks of Adobe Systems Incorporated.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.

macOS is a trademark of Apple Inc., registered in the U.S. and other countries.

AirPrint is a trademark of Apple Inc., registered in the U.S. and other countries.

Google™ is a trademark of Google Inc.

Microsoft ^® , Windows ^® , Windows ^® XP, and Windows Vista ^® are U.S. registered trademarks of Microsoft Corporation.

UNIX ^® is a registered trademark of The Open Group.

Table of contents

1 Printer overview .... 1

Warning icons .... 1

Potential shock hazard 2

Open source license 3

Printer views 4

Printer front view 4

Printer back view 5

Control panel view 6

How to use the touchscreen control panel 8

Printer specifications 9

Technical specifications 9

Supported operating systems 10

Mobile printing solutions 12

Printer dimensions 12

Power consumption, electrical specifications, and acoustic emissions 14

Operating environment range 14

Printer hardware setup and software installation 15

2 Paper trays 17

Introduction 17

Load paper to Tray 1 18

Introduction 18

Load Paper Tray 1 (multipurpose tray) 18

Tray 1 paper orientation .... 19

Load paper to Tray 2 22

Introduction 22

Load paper Tray 2 22

Tray 2 paper orientation 24

Load paper to Tray 3 27

Introduction 27

Load paper to Tray 3 (optional) 27

Tray 3 paper orientation .... 29

Load and print envelopes 31

Introduction 31

Print envelopes 31

Envelope orientation 31

3 Supplies, accessories, and parts 33

Order supplies, accessories, and parts 34

Ordering 34

Supplies and accessories 34

Customer self-repair parts 36

Dynamic security 36

Configure the HP toner-cartridge-protection supply settings 37

Introduction 37

Enable or disable the Cartridge Policy feature 38

Use the printer control panel to enable the Cartridge Policy feature 38

Use the printer control panel to disable the Cartridge Policy feature 38

Use the HP Embedded Web Server (EWS) to enable the Cartridge Policy feature 38

Use the HP Embedded Web Server (EWS) to disable the Cartridge Policy feature ...... 39

Troubleshoot Cartridge Policy control panel error messages 39

Enable or disable the Cartridge Protection feature 41

Use the printer control panel to enable the Cartridge Protection feature 41

Use the printer control panel to disable the Cartridge Protection feature 41

Use the HP Embedded Web Server (EWS) to enable the Cartridge Protection feature ..... 42

Use the HP Embedded Web Server (EWS) to disable the Cartridge Protection feature .... 42

Troubleshoot Cartridge Protection control panel error messages 43

Replace the toner cartridges 44

Toner cartridge information 44

Remove and replace the toner cartridges 46

4 Print 51

Print tasks (Windows) 52

How to print (Windows) 52

Automatically print on both sides (Windows) 52

Manually print on both sides (Windows) 53

Print multiple pages per sheet (Windows) 53

Select the paper type (Windows) 54

Additional print tasks 54

Print tasks (macOS) 55

How to print (macOS) 55

Automatically print on both sides (macOS) 55

Manually print on both sides (macOS) 55

Print multiple pages per sheet (macOS) 56

Select the paper type (macOS) 56

Additional print tasks 57

Store print jobs on the printer to print later or print privately 58

Introduction 58

Before beginning 58

Set up job storage 58

Disable or enable the job storage feature 59

Create a stored job (Windows) 60

Create a stored job (macOS) 60

Print a stored job 61

Delete a stored job 63

Delete a job that is stored on the printer 63

Information sent to printer for Job Accounting purposes 63

Mobile printing 64

Introduction 64

Wi-Fi Direct printing (wireless models only) 65

To turn on Wi-Fi Direct 65

Change the printer Wi-Fi Direct name 66

Step one: Open the HP Embedded Web Server 66

Step two: Change the Wi-Fi Direct name 66

HP ePrint via Email 66

AirPrint 67

Android embedded printing 67

Print from a USB flash drive 68

Introduction 68

Print USB documents 68

5 Copy 69

Make a copy 69

Copy on both sides (duplex) 70

Copy on both sides automatically 70

Copy on both sides manually 70

Copy an identification card 70

Additional copy tasks 71

6 Scan 73

Scan by using HP Scan software (Windows) 73

Scan by using HP Easy Scan Software (macOS) 74

Set up Scan to Email 75

Introduction 75

Before you begin 75

Method one: Use the Scan to Email Wizard (Windows) 75

Method two: Set up the Scan to Email feature via the HP Embedded Web Server 78

Step one: Access the HP Embedded Web Server (EWS) 78

Step two: Configure the Scan to Email feature 78

Set up Scan to Network Folder 79

Introduction 79

Before you begin 79

Method one: Use the Scan to Network Folder Wizard (Windows) 79

Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server 82

Step one: Access the HP Embedded Web Server (EWS) 82

Step two: Configure the Scan to Network Folder feature 82

Set up Scan to SharePoint 83

Step one: Access the HP Embedded Web Server (EWS) 83

Step two: Set up Scan to SharePoint 83

Set up Scan to Computer (Windows) 84

Enable scanning to a computer (Windows) 84

Scan to a USB flash drive 84

Scan to email 85

Scan to a network folder 85

Scan to SharePoint 86

Scan to a computer (Windows) 86

Additional scan tasks 87

7 Fax 89

Connect and configure the printer for fax 90

Connect the printer to a telephone line 90

Configure the printer for fax 91

Configure the fax time, date and header using the HP Fax Setup Wizard 91

Configure the time, date, and header using the printer control panel 91

Configure the time, date, and header using the HP Embedded Web Server and Printer Home Page (EWS) 92

Configure for stand-alone fax 93

Configure for an answering machine 93

Install the HP Fax software in Windows (optional) 94

Send a fax 95

Send a fax by dialing manually from the printer control panel 95

Fax from the flatbed scanner 95

Fax from the document feeder 96

Schedule a fax to be sent later 97

Use phone book entries 97

Send a fax from the software (Windows) 98

Send a fax from a third-party software program, such as Microsoft Word 99

Create, edit, and delete phone book entries 100

Create and edit individual phone-book entries 100

Create and edit group phone-book entries 100

Delete phone book entries 100

Reprint a received fax from the printer memory 101

Additional fax tasks 101

8 Manage the printer 103

Use HP Web Services applications 103

Change the printer connection type (Windows) 104

Advanced configuration with HP Embedded Web Server and Printer Home Page (EWS) 105

Method one: Open the HP Embedded Web Server (EWS) from the software 105

Method two: Open the HP Embedded Web Server (EWS) from a web browser 105

Configure IP network settings 109

Introduction 109

Printer sharing disclaimer 109

View or change network settings 109

Rename the printer on a network 109

Manually configure IPv4 TCP/IP parameters from the control panel 110

Link speed and duplex settings 110

Printer security features 112

Introduction 112

Assign or change the system password using the Embedded Web Server 112

Energy-conservation settings 113

Introduction 113

Print with EconoMode 113

Set the Sleep Mode setting 113

Set the Shutdown Mode setting 113

Set the Disable Shutdown setting 114

HP Web Jetadmin 114

Update the firmware 115

Method one: Update the firmware using the control panel 115

Method two: Update the firmware using the HP Printer Update utility 115

9 Solve problems 117

Customer support 117

Control panel help system 118

Restore the factory-set defaults 118

A "Cartridge is low" or "Cartridge is very low" message displays on the printer control panel 119

Change the "Very Low" settings 120

Change the "Very Low" settings from the control panel 120

For printers with fax capability 120

Order supplies 120

Printer does not pick up paper or misfeeds 122

Introduction 122

The printer picks up multiple sheets of paper 122

The printer does not pick up paper 124

The document feeder jams, skews, or picks up multiple sheets of paper 126

Clear paper jams 127

Introduction 127

Experiencing frequent or recurring paper jams? 127

Paper jam locations 128

Clear paper jams in the document feeder 128

Clear paper jams in Tray 1 - 13.02 .... 131

Clear paper jams in Tray 2 - 13.03 133

Clear paper jams in the output bin - 13.10, 13.11, 13.12 135

Clear paper jams in the duplexer (duplex models only) - 13.14, 13.15 .... 135

Clear paper jams in the toner cartridge or fuser area - 13.08, 13.09 136

Resolving print quality problems 138

Introduction 138

Troubleshoot print quality 139

Update the printer firmware 139

Print from a different software program 139

Check the paper-type setting for the print job 140

Check the paper type setting on the printer 140

Check the paper type setting (Windows) 140

Check the paper type setting (macOS) 140

Check toner-cartridge status 141

Step one: Print a supplies status page 141

Step two: Check supplies status 141

Print a cleaning page 141

Visually inspect the toner cartridge or cartridges 142

Check paper and the printing environment 143

Step one: Use paper that meets HP specifications 143

Step two: Check the environment 143

Step three: Set the individual tray alignment 143

Try a different print driver 144

Troubleshoot color quality 145

Calibrate the printer to align the colors 145

Adjust color settings (Windows) 145

Print and interpret the print quality page 145

Check the EconoMode settings 146

Adjust print density 147

Troubleshoot image defects 147

Improve copy and scan image quality 157

Introduction 157

Check the scanner glass for dirt and smudges 157

Check the paper settings 158

Check the image adjustment settings 158

Optimize for text or pictures 158

Check the scanner resolution and color settings on the computer 159

Resolution and color guidelines 159

Color 160

Edge-to-edge copying 160

Clean the pickup rollers and separation pad in the document feeder 160

Improve fax image quality 163

Introduction 163

Check the scanner glass for dirt and smudges 163

Check the send-fax resolution settings 164

Check the Error Correction Mode setting 164

Send to a different fax machine 164

Check the sender's fax machine 164

Solve wired network problems 165

Introduction 165

Poor physical connection 165

The computer is using the incorrect IP address for the printer 165

The computer is unable to communicate with the printer 165

The printer is using incorrect link and duplex settings for the network 166

New software programs might be causing compatibility problems 166

The computer or workstation might be set up incorrectly 166

The printer is disabled, or other network settings are incorrect 166

Solve wireless network problems 167

Introduction 167

Wireless connectivity checklist 167

The printer does not print after the wireless configuration completes 168

The printer does not print, and the computer has a third-party firewall installed 168

The wireless connection does not work after moving the wireless router or printer 168

Cannot connect more computers to the wireless printer 169

The wireless printer loses communication when connected to a VPN 169

The network does not appear in the wireless networks list 169

The wireless network is not functioning 169

Perform a wireless network diagnostic test 170

Reduce interference on a wireless network 170

Solve fax problems 171

Introduction 171

Fax troubleshooting checklist 171

Solve general fax problems 173

Faxes are sending slowly 173

Fax quality is poor 173

Fax cuts off or prints on two pages 174

Index 175

1 Printer overview

Review the location of features on the printer, the physical and technical specifications of the printer, and where to locate setup information.

• Warning icons
  • Potential shock hazard
  Open source license
  Printer views
  • Printer specifications
  • Printer hardware setup and software installation

For more information:

For video assistance, see www.hp.com/videos/LaserJet.

The following information is correct at the time of publication. For current information, see www.hp.com/support/colorljM479MFP.

HP's all-inclusive help for the printer includes the following information:

• Install and configure
- Learn and use
- Solve problems
- Download software and firmware updates
- Join support forums
• Find warranty and regulatory information

Warning icons

Use caution if you see a warning icon on your HP printer, as indicated in the icon definitions.

• Caution: Electric shock

Warning symbol of a lightning bolt inside a triangle (no text or numbers)

- Caution: Hot surface

Warning symbol depicting steam rising inside a triangle, indicating heat or smoke hazard.

- Caution: Keep body parts away from moving parts

Warning symbol with two gear icons inside a triangle (no text or numbers)

- Caution: Sharp edge in close proximity

Warning sign depicting a hand holding a device with a lightning bolt symbol, commonly used in safety or hazard prevention.

• Warning

Warning symbol with exclamation mark inside triangle, commonly used to indicate caution or hazard

Potential shock hazard

Review this important safety information.

• Read and understand these safety statements to avoid an electrical shock hazard.
• Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock.
• Read and understand all instructions in the user guide.
• Observe all warnings and instructions marked on the product.
• Use only a grounded electrical outlet when connecting the product to a power source. If you do not know whether the outlet is grounded, check with a qualified electrician.
• Do not touch the contacts on any of the sockets on the product. Replace damaged cords immediately.
• Unplug this product from wall outlets before cleaning.
• Do not install or use this product near water or when you are wet.
  • Install the product securely on a stable surface.
  • Install the product in a protected location where no one can step on or trip over the power cord.

Open source license

For information on open source software used in this printer, visit www.hp.com/software/opensource.

Printer views

Identify parts on the printer and buttons on the control panel.

Printer front view
Printer back view
Control panel view

Printer front view

Identify the parts on the front of the printer.

Figure 1-1 Printer front view

Diagram of a HP printer with numbered parts and a circular inset showing a certificate with 'CE' and certification marks.

Number Description

1 Scanner

2 Document feeder

3 Regulatory label (inside the front door)

4 Tray 2

5 Tray 1

6 Power on/off button

7 Front door (provides toner cartridge access)

8 Output bin extension

9 Output bin

10 Walk-up USB port (for printing and scanning without a computer)

11 Touchscreen control panel (tilts up for easier viewing)

Printer back view

Identify the parts on the back of the printer.

Figure 1-2 Printer rear view

Diagram of HP printer internal components with numbered labels pointing to different parts

Number Description

1 Front door release button

2 Duplexer (dw, fdn, and fdw models only)

3 USB port for job storage

4 USB port for direct connection to a computer

5 Ethernet port

6 Fax ports cover

NOTE: The fax ports are behind the cover.

7 Power connection

8 Rear door (fnw model only) (provides access for clearing jams)

Control panel view

Identify the buttons and features on the touchscreen control panel.

• How to use the touchscreen control panel

The Home screen provides access to the printer features and indicates the current status of the printer.

Return to the Home screen at any time by touching the Home button on the bottom of the printer control panel.

NOTE: For more information about the printer control panel features, go to www.hp.com/support/colorljM479MFP.

NOTE: The features that appear on the Home screen can vary, depending on the printer configuration.

Figure 1-3 Control panel view

Diagram of a tablet device showing labeled UI components including printer, phone, and print icons with numbered annotations.

Number Item Description

1 Home screen dashboard display icons

See the table that follows for a description of the icons.Pull down this tab to open the Jobs menu.

2 Home screen icons Touch these icons to open the menus for these functions.
3 Help button Provides access to the control panel help system.
4 Home button Provides access to the Home screen.
5 Back button Returns to the previous screen.
6 Color touchscreen Provides access to menus, help animations, and printer information.
7 Sign In button Touch this button to sign in to the printer.

8

Copy icon: Touch this icon to open the Copy menu.

Number Item Description
9 Scan icon: Touch to open the Scan menus:
10 Print icon: Touch to open the Print menus.
11		Fax icon: Touch this icon to open the Fax menus.
12		Apps icon: Touch this icon to open the Apps menu to print directly from select Web applications.
13 Quick Sets icon	this icon to access shortcut jobs that are set up for frequently performed tasks. This icon appears after a Quick Set is configured.

NOTE: While the control panel does not have a standard Cancel button, during many printer processes a Cancel button appears on the touchscreen. This permits users to cancel a process before the printer completes it.

Home screen dashboard display icons

Table 1-1 Home screen icons

Icon Purpose
	Setup icon: Opens the Setup menu, where you can change preferences and perform maintenance functions.
[788X]	Wireless icon: Opens the Wireless Summary menu, where you can check wireless status and change wireless settings. You can also print a wireless test report, which helps diagnosing network connection issues.
	HP ePrint icon: Opens the Web Services Summary menu, where you can check ePrint status details, change ePrint settings, or print an Info page.
	Wi-Fi Direct icon: Opens the Wi-Fi Direct menu, where you can turn on Wi-Fi Direct, turn off Wi-Fi Direct, and display the Wi-Fi Direct name and password.
	Cartridge icon: Opens the Cartridge Information screen, where you can view the estimated levels and pages remaining for the toner cartridges.
	Paper Setup icon: Opens the Paper Setup menu, where you can configure the default Paper Size and Paper Type for the paper trays.
	Fax Status icon: Displays status information for the Auto Answer function, fax logs, and the fax sound volume.
	ECO icon: Allows you to configure some of the printer environmental features.

How to use the touchscreen control panel

Use the following actions to use the printer touchscreen control panel.

Table 1-2 How to use the touchscreen control panel

Action Description Example
Touch Touch an item on the screen to select that item or open that menu. Also, when scrolling through menus, briefly touch the screen to stop the scrolling.	Touch the Setup open to open the Setup menu.
Swipe	Touch the screen and then move your finger horizontally to scroll the screen sideways.	Swipe the Home screen to access additional menu options.
Scroll	Touch the screen and then move your finger vertically to scroll the screen up and down. When scrolling through menus, briefly touch the screen to stop the scrolling.	Scroll through the Setup menu.

Printer specifications

Review hardware, software, and printer environment specifications.

• Technical specifications
• Supported operating systems
• Mobile printing solutions
Printer dimensions
• Power consumption, electrical specifications, and acoustic emissions
• Operating environment range

IMPORTANT: The following specifications are correct at the time of publication, but they are subject to change.

For current information, see www.hp.com/support/colorljM479MFP.

Technical specifications

Review the technical specifications for the printer.

For current information, see www.hp.com/support/colorljM479MFP.

Table 1-3 Technical specifications

Model name		M479dw	M479fnw	M479fdn	M479fdw
Product number		W1A77A	W1A78A	W1A79A	W1A80A
Paper handling Tray 1 (50-sheet capacity) Included Included Included Included
Paper handling Tray 2 (250-sheet capacity) Included Included Included Included
Paper handling Optional 550-sheet accessory tray Optional Optional Optional Optional
Paper handling	Automatic duplex printing	Included	Not available	Included	Included
Connectivity 10/100/1000 Ethernet LAN connection with IPv4 and IPv6		Included Included Included Included
Connectivity Hi-Speed USB 2.0	Included Included Included Included
Connectivity Walk-up USB port	Included Included Included Included
Connectivity	Print server for wireless connectivity	Included	Included	Not available	Included
Connectivity	Bluetooth Low Energy (BLE)	Included	Included	Not available	Included
Connectivity Wi-Fi Direct for printing from mobile devices		Included Included Not available Included
Control-panel display and input	Color touchscreen control panel	Included Included Included Included
Print	Prints 27 pages per minute (ppm) on A4 and 28 ppm on letter-size paper	Included Included Included Included
Print	USB printing (no computer required)	Included	Included	Included	Included
Print Job storage and private printing(Requires a 16 GB or greater USB thumb drive.)		Included Included Included Included
Fax Fax features Not available	Included Included Included
Fax HP Digital Fax (Fax to Email and Fax to Network Folder options)		Not available Included Included Included
Copy and Scan Copies 19 pages per minute (ppm) and scans up to 26 ppm. NOTE: Copy and scan speeds are subject to change.		Included Included Included Included
Copy and Scan 50-page document feeder with dual-head scanning for single-pass duplex copying and scanning		Not available Included Included Included
Copy and Scan 50-page document feeder with simplex copying and scanning		Included Included Included Included
Copy and Scan Scan to E-mail,	Scan to USB, and Scan to Network Folder options	Included Included Included Included

Supported operating systems

The following information applies to the printer-specific Windows and HP print drivers for macOS and to the software installer.

Windows: The HP Software Installer installs either a V3 or V4 PCL 6 print driver depending on the Windows operating system along with optional software when using the full software installer. See the software installation notes for more information.

macOS: Mac computers and Apple mobile devices are supported with this printer. Download HP Easy Start either from 123.hp.com/laserjet or from the Printer Support page, and then use HP Easy Start to install the HP print driver. HP Easy Start is not included in the HP Software Installer.

1. Go to 123.hp.com/laserjet.

2. Follow the steps provided to download HP Easy Start.

Linux: For information and print drivers for Linux, go to www.hp.com/go/linuxprinting.

UNIX: For information and print drivers for UNIX, go to www.hp.com/go/unixmodelscripts.

Table 1-4 Supported operating systems and print drivers

Operating system Print driver installed (from the software on the web)
Windows 7, 32-bit and 64-bit	The HP PCL 6 (V3) printer-specific print driver is installed for this operating system as part of the software installation.
Windows 8, 32-bit and 64-bit	The HP PCL 6 (V3) printer-specific print driver is installed for this operating system as part of the software installation.1
Windows 8.1, 32-bit and 64-bit	The HP PCL-6 (V4) printer-specific print driver is installed for this operating system as part of the software installation. ^2
Windows 10, 32-bit and 64-bit	The HP PCL-6 (V4) printer-specific print driver is installed for this operating system as part of the software installation.
Windows Server 2008 R2, 64-bit	The HP PCL 6 (V3) printer-specific print driver is available for download from the printer support website. Download the driver, and then use the Microsoft Add Printer tool to install it. ^3
Windows Server 2008 R2, SP1, 64-bit	The HP PCL 6 (V3) printer-specific print driver is available for download from the printer support website. Download the driver, and then use the Microsoft Add Printer tool to install it.
Windows Server 2012	The HP PCL 6 (V3) printer-specific print driver is available for download from the printer support website. Download the driver, and then use the Microsoft Add Printer tool to install it.
Windows Server 2012 R2	The HP PCL 6 (V3) printer-specific print driver is available for download from the printer support website. Download the driver, and then use the Microsoft Add Printer tool to install it.
Windows Server 2016, 64-bit	The HP PCL 6 (V3) printer-specific print driver is available for download from the printer support website. Download the driver, and then use the Microsoft Add Printer tool to install it.
macOS Sierra 10.12, macOS High Sierra 10.13, macOS Mojave 10.14	To install the print driver, download HP Easy Start from 123.hp.com/laserjet. Follow the steps provided to install the printer software and print driver.

1 Windows 8 RT support is provided through Microsoft IN OS Version 4, 32-bit driver.
2 Windows 8.1 RT support is provided through Microsoft IN OS Version 4, 32-bit driver.
^3 Microsoft retired mainstream support for Windows Server 2008 in January 2015. HP will continue to provide best effort support for the discontinued Server 2008 operating system.

NOTE: For a current list of supported operating systems, go to www.hp.com/support/colorljM479MFP for HP's all-inclusive help for the printer.

NOTE: For details on client and server operating systems and for HP UPD PCL6 and UPD PS driver support for this printer, go to www.hp.com/go/upd and click Specifications.

Table 1-5 Minimum system requirements

Windows 7, 8, 8.1, 10 macOS Sierra v10.12, macOSHigh Sierra v10.13, macOSMojave v10.14 Mobile devices, iOS, Android
•32-bit or 64-bit	•2 GB of available hard disk space	Router connection not requiredwww.hp.com/go/mobileprinting
•2 GB of available hard disk space	•Internet connection
•Microsoft Internet Explorer
•Internet connection
•USB port

Mobile printing solutions

HP offers multiple mobile and ePrint solutions to enable easy printing to an HP printer from a laptop, tablet, smartphone, or other mobile device.

To see the full list and to determine the best choice, go to www.hp.com/go/MobilePrinting.

The printer supports the following software for mobile printing:

• Wi-Fi Direct (wireless models only)
- Bluetooth Low Energy
• HP Smart app for iOS and Android devices
- Google Cloud Print
AirPrint
- Android Printing
HP Roam

Printer dimensions

Make sure your printer environment is large enough to accommodate the printer.

Dimensions for the M479fnw model

Technical diagram showing two views of a printer with labeled parts and dimension annotations

Table 1-6 Dimensions for the M479fnw model

Measurement Printer fully closed Printer fully opened

1 - Height 399.8 mm (15.74 in) 656 mm (25.83 in)

2 - Depth 461 mm (18.15 in) 1025 mm (40.35 in)

3 - Width 415.4 mm (16.35 in) 415.4 mm (16.35 in)

Weight (with cartridges) 21.8 kg (48.06 lb) 21.8 kg (48.06 lb)

Dimensions for the M479dw, M479fdn, and M479fdw models

Technical diagram showing two views of a printer with labeled parts and dimension annotations

Table 1-7 Dimensions for the M479dw, M479fdn, and M479fdw models

Measurement Printer fully closed Printer fully opened

1 - Height 399.8 mm (15.74 in) 656 mm (25.83 in)

2 - Depth 472 mm (18.59 in) 1124.4 mm (44.27 in)

3 - Width 415.4 mm (16.35 in) 415.4 mm (16.35 in)

Weight (with cartridges) 23.2 kg (51.15 lb) 23.2 kg (51.15 lb)

Dimensions for models with optional Tray 3

Technical diagram showing two views of a printer with labeled parts and dimension annotations

Table 1-8 Dimensions for the printer with the optional Tray 3

Measurement Printer fully closed Printer fully opened
1 - Height 531.8 mm (20.93 in) 788 mm (31.02 in)
2 - Depth 461 mm (18.15 in) (fnw model)	1025 mm (40.35 in) (fnw model)
472.3 mm (18.59 in) (dw, fdn, and fdw models)	1124.4 mm (44.27 in) (dw, fdn, and fdw models)
3 - Width 415.4 mm (16.35 in) 415.4 mm (16.35 in)
Weight (with cartridge) 27 kg (59.52 lb) (fnw model)	27 kg (59.52 lb) (fnw model)
28.4 kg (62.61 lb) (dw. fdn, and fdw models)	28.4 kg (62.61 lb) (dw. fdn, and fdw models)

Power consumption, electrical specifications, and acoustic emissions

In order to operate properly, the printer must be in an environment that meets certain power specifications. For current information, see the support home page for your printer:www.hp.com/support/colorljM479MFP.

CAUTION: Power requirements are based on the country/region where the printer is sold. Do not convert operating voltages. This will damage the printer and void the printer warranty.

Operating environment range

Review the recommended operating-environment specifications for your printer.

Table 1-9 Operating environment specifications

Environment Recommended Allowed

Temperature 15° to 27°C (59° to 80.6°F) 15° to 30°C (59° to 86°F)

Relative humidity 20% to 70% relative humidity (RH) 10% to 80% RH

Printer hardware setup and software installation

For basic setup instructions, see the Hardware Installation Guide that came with the printer. For additional instructions, go to HP support on the web.

Go to www.hp.com/support/colorljM479MFP for HP's all-inclusive help for the printer, which includes the following information:

• Install and configure
- Learn and use
- Solve problems
- Download software and firmware updates
- Join support forums
• Find warranty and regulatory information

- Find instructions about how to use the Microsoft Add Printer tool

2 Paper trays

Discover how to load and use the paper trays, including how to load special items such as envelopes.

Introduction
- Load paper to Tray 1
- Load paper to Tray 2
- Load paper to Tray 3
- Load and print envelopes

For more information:

HP's all-inclusive help for the printer includes the following information:

• Install and configure
- Learn and use
- Solve problems
- Download software and firmware updates
- Join support forums
• Find warranty and regulatory information

Introduction

Review the following information about the paper trays.

CAUTION: Do not extend more than one paper tray at a time.

Do not use paper tray as a step.

Keep hands out of paper trays when closing.

All trays must be closed when moving the printer.

Load paper to Tray 1

Review the following information about loading paper to Tray 1.

Introduction
• Load Paper Tray 1 (multipurpose tray)
Tray 1 paper orientation

Introduction

The following information describes how to load paper into Tray 1.

Load Paper Tray 1 (multipurpose tray)

Follow these steps to load paper in Tray 1.

This tray holds up to 50 sheets of 75g / m^2 (20 lb) paper.

CAUTION: To avoid jams, never add or remove paper from Tray 1 during printing.

1. Open Tray 1 by grasping the handles on the left and right side of the tray and pulling down.

Diagram of a mechanical device interior showing internal components and a blue arrow indicating direction (no text or symbols)

1. Slide out the tray extension.

Diagram of a mechanical device interior showing a blue arrow indicating direction (no text or symbols present)

1. Press down on the tab on the right paper guide, and then spread the paper guides to the correct size.

Diagram of a device interior showing internal components and a magnified view of a component (no text or symbols)

1. Load the paper into the tray. Make sure that the paper fits under the tabs and below the maximum height indicators.

For information on how to orient the paper, see Tray 1 paper orientation on page 19.

Technical line drawing of a mechanical component with a magnified inset showing a detail (no text or symbols)

1. At the computer, begin the printing process from the software application. Make sure that the driver is set to the correct paper type and size for the paper being printed from the tray.

Tray 1 paper orientation

When using paper that requires a specific orientation, load it according to the information in the following table.

Table 2-1 Tray 1 paper orientation

Paper type Output How to load paper

Letterhead or preprinted 1-sided printing Face-up

Top edge leading into the printer

Technical line drawing of a mechanical component with no visible text or symbols

Table 2-1 Tray 1 paper orientation (continued)

Paper type Output How to load paper
Letterhead or preprinted 2-sided printing Face-down	Top edge away from the printer
Pre-punched 1-sided or 2-sided printing Face-up	Holes toward the left side of the printer

Load paper to Tray 2

Review the following information about loading paper to Tray 2.

Introduction
- Load paper Tray 2
Tray 2 paper orientation

Introduction

The following information describes how to load paper into Tray 2.

Load paper Tray 2

This tray holds up to 250 sheets of 75g / m^2 (20 lb) paper.

1. Open tray 2.

Technical line drawing of a mechanical component with a blue arrow indicating direction (no text or symbols present)

1. Adjust the paper-width guides by squeezing the adjustment latches on the guides and then sliding the guides to the size of the paper being used.

Technical diagram of a mechanical device with blue arrows indicating directional flow or movement (no text or symbols present)

1. To load legal-size paper, extend the tray front by squeezing the front latch and pulling the front of the tray.

Technical diagram of a computer chassis showing internal components and blue directional arrows indicating movement or flow (no text or symbols present)

NOTE: When loaded with legal-size paper, Tray 2 extends from the front of the printer approximately (2 in)51 mm.

1. Load the paper into the tray.

For information about how to orient the paper, see Tray 2 paper orientation on page 24.

3D diagram of an open device casing with a blue arrow indicating a process or transformation (no text or symbols present)

1. Make sure that the paper stack is flat at all four corners. Slide the paper length and width guides so that they are against the stack of paper.

NOTE: To prevent jams, do not overfill the tray. Be sure that the top of the stack is below the tray full indicator.

Exploded view diagram of a computer chassis showing internal components and blue arrows indicating assembly (no text or symbols)

1. After making sure that the paper stack is below the tray full indicator, close the tray.

Technical line drawing of a mechanical assembly with a blue arrow indicating direction (no text or symbols present)

1. At the computer, begin the printing process from the software application. Make sure that the driver is set to the correct paper type and size for the paper being printed from the tray.

Tray 2 paper orientation

When using paper that requires a specific orientation, load it according to the information in the following table.

Table 2-2 Tray 2 paper orientation

Paper type Output How to load paper
Letterhead or preprinted 1-sided printing Face-up	Top edge toward the printer.
Letterhead or preprinted 2-sided printing Face-down	Top edge away from the printer
Prepunched 1-sided printing or 2-sided printing Face-up	Holes toward the left side of the printer

For information about positioning and orienting envelopes in Tray 2, see Envelope orientation on page 31.

Load paper to Tray 3

Review the following information about loading paper to Tray 3.

Introduction
• Load paper to Tray 3 (optional)
Tray 3 paper orientation

Introduction

The following information describes how to load paper into Tray 3.

Load paper to Tray 3 (optional)

This tray holds up to 550 sheets of 75g / m^2 (20 lb) paper.

Do not print envelopes, labels, or unsupported sizes of paper from Tray 3. Print these types of paper only from Tray 1.

1. Open Tray 3.

Diagram of a printer with a blue arrow indicating a download or disassembly process (no text or symbols present)

1. Adjust the paper-width guides by squeezing the adjustment latches on the guides and then sliding the guides to the size of the paper being used.

3D diagram of a computer chassis with blue arrows indicating directional movement (no text or symbols)

1. To load legal-size paper, extend the tray front by squeezing the front latch and pulling the front of the tray.

Technical diagram of a computer chassis showing internal components and blue directional arrows indicating movement or flow (no text or symbols present)

1. Load paper into the tray.

For information about how to orient the paper, see Tray 3 paper orientation on page 29.

1. Make sure that the paper stack is flat at all four corners. Slide the paper length and width guides so that they are against the stack of paper.

NOTE: To prevent jams, do not overfill the tray. Be sure that the top of the stack is below the tray full indicator.

Diagram of a computer drawer with blue arrows indicating file movement or process, showing internal structure and a magnified detail (no text or symbols)

1. After making sure that the paper stack is below the tray full indicator, close the tray.

Diagram of a HP printer drawer with an arrow indicating compression or disassembly (no text or symbols present)

1. At the computer, begin the printing process from the software application. Make sure that the driver is set to the correct paper type and size for the paper being printed from the tray.

Tray 3 paper orientation

When using paper that requires a specific orientation, load it according to the information in the following table.

Table 2-3 Tray 3 paper orientation

Paper type Output How to load paper

Letterhead or preprinted 1-sided printing Face-up

Top edge toward the printer.

Technical line drawing of a file drawer with a labeled component (no text or symbols beyond the number)

Table 2-3 Tray 3 paper orientation (continued)

Paper type Output How to load paper

Letterhead or preprinted 2-sided printing Face-down

Top edge away from the printer

Line drawing of a file drawer with internal compartments and storage areas (no text or symbols)

Prepunched 1-sided printing or 2-sided printing Face-up

Holes on left side of the printer

Technical line drawing of a mechanical device with labeled component '123' (no text or symbols beyond label)

Load and print envelopes

Review the following information about loading and printing envelopes.

Introduction
- Print envelopes
• Envelope orientation

Introduction

The following information describes how to print and load envelopes.

Print envelopes

To print envelopes using either Tray 1 or Tray 2, follow the steps to select the correct settings in the print driver. Tray 1 holds up to 10 envelopes.

1. From the software program, select the Print option.
2. Select the printer from the list of printers, and then click or tap the Properties or Preferences button to open the print driver.

NOTE: The name of the button varies for different software programs.

1. Click or tap the Paper/Quality tab.

2. In the Paper size drop-down list, select the correct size for the envelopes.

3. In the Paper type drop-down list, select Envelope.
4. In the Paper source drop-down list, select Manual feed.
5. Click the OK button to close the Document Properties dialog box.
6. In the Print dialog box, click the OK button to print the job.

Envelope orientation

When using envelopes, load them according to the information in the following table.

Table 2-4 Envelope orientation

Tray How to load
Tray 1 Face-up	Short, postage-end leading into the printer
Tray 2 Face-up	Short, postage-end leading into the printer

3 Supplies, accessories, and parts

Order supplies or accessories, replace the toner cartridges, or remove and replace another part.

• Order supplies, accessories, and parts
• Dynamic security
- Configure the HP toner-cartridge-protection supply settings
- Replace the toner cartridges

For video assistance, see www.hp.com/videos/LaserJet.

For more information:

HP's all-inclusive help for the printer includes the following information:

• Install and configure
- Learn and use
- Solve problems
- Download software and firmware updates
- Join support forums
• Find warranty and regulatory information

Order supplies, accessories, and parts

Review details about ordering supplies, accessories and parts for your printer.

• Ordering
  • Supplies and accessories
• Customer self-repair parts

Ordering

Find information and links for ordering supplies, parts, and accessories for your printer.

Ordering option Ordering information
Order supplies and paper www.hp.com/go/suresupply	____
Order genuine HP parts or accessories www.hp.com/buy/parts	____
Order through service or support providers Contact an HP-authorized service or support provider.
Order using the HP Embedded Web Server (EWS) To access, in a supported Web browser on your computer, enter the printer IP address or host name in the address/URL field. The EWS contains a link to the HP SureSupply Web site, which provides options for purchasing Original HP supplies.

Supplies and accessories

Find information about the supplies and accessories that are available for your printer.

CAUTION: Cartridges are for distribution and use within their designated region only; they will not work outside of their designated region.

Table 3-1 Supplies

Item Description Cartridge number Part number
Supplies
For use in North America and Latin America only
HP 414A Black Original LaserJet Toner Cartridge	Standard-capacity replacement black toner cartridge	414A W2020A
HP 414A Cyan Original LaserJet Toner Cartridge	Standard-capacity replacement cyan toner cartridge	414A W2021A
HP 414A Yellow Original LaserJet Toner Cartridge	Standard-capacity replacement yellow toner cartridge	414A W2022A
HP 414A Magenta Original LaserJet Toner Cartridge	Standard-capacity replacement magenta toner cartridge	414A W2023A
HP 414X High Yield Black Original LaserJet Toner Cartridge	High-capacity replacement black toner cartridge	414X W2020X
HP 414X High Yield Cyan Original LaserJet Toner Cartridge	High-capacity replacement cyan toner cartridge	414X W2021X
HP 414X High Yield Yellow Original LaserJet Toner Cartridge	High-capacity replacement yellow toner cartridge	414X W2022X
HP 414X High Yield Magenta Original LaserJet Toner Cartridge	High-capacity replacement magenta toner cartridge	414X W2023X
For use in Europe, Middle East, Russia, CIS, and Africa only
HP 415A Black Original LaserJet Toner Cartridge	Standard-capacity replacement black toner cartridge	415A W2030A
HP 415A Cyan Original LaserJet Toner Cartridge	Standard-capacity replacement cyan toner cartridge	415A W2031A
HP 415A Yellow Original LaserJet Toner Cartridge	Standard-capacity replacement yellow toner cartridge	415A W2032A
HP 415A Magenta Original LaserJet Toner Cartridge	Standard-capacity replacement magenta toner cartridge	415A W2033A
HP 415X High Yield Black Original LaserJet Toner Cartridge	High-capacity replacement black toner cartridge	415X W2030X
HP 415X High Yield Cyan Original LaserJet Toner Cartridge	High-capacity replacement cyan toner cartridge	415X W2031X
HP 415X High Yield Yellow Original LaserJet Toner Cartridge	High-capacity replacement yellow toner cartridge	415X W2032X
HP 415X High Yield Magenta Original LaserJet Toner Cartridge	High-capacity replacement magenta toner cartridge	415X W2033X
For use in Asia Pacific only
HP 416A Black Original LaserJet Toner Cartridge	Standard-capacity replacement black toner cartridge	416A W2040A
HP 416A Cyan Original LaserJet Toner Cartridge	Standard-capacity replacement cyan toner cartridge	416A W2041A
HP 416A Yellow Original LaserJet Toner Cartridge	Standard-capacity replacement yellow toner cartridge	416A W2042A
HP 416A Magenta Original LaserJet Toner Cartridge	Standard-capacity replacement magenta toner cartridge	416A W2043A
HP 416X High Yield Black Original LaserJet Toner Cartridge	High-capacity replacement black toner cartridge	416X W2040X
HP 416X High Yield Cyan Original LaserJet Toner Cartridge	High-capacity replacement cyan toner cartridge	416X W2041X
HP 416X High Yield Yellow Original LaserJet Toner Cartridge	High-capacity replacement yellow toner cartridge	416X W2042X
HP 416X High Yield Magenta Original LaserJet Toner Cartridge	High-capacity replacement magenta toner cartridge	416X W2043X

Table 3-2 Accessories

Item Description Part number

Accessories

Optional 550-sheet paper feeder Optional Tray 3 CF404A

USB 2.0 printer cable A-to-B cable (2-meter standard) DT2738

Customer self-repair parts

Customer Self-Repair (CSR) parts are available for many HP LaserJet printers to reduce repair time.

More information about the CSR program and benefits can be found at www.hp.com/go/csr-support and www.hp.com/go/csr-fag.

Genuine HP replacement parts can be ordered at www.hp.com/buy/parts or by contacting an HP-authorized service or support provider. When ordering, one of the following will be needed: part number, serial number (found on back of printer), product number, or printer name.

• Parts listed as Mandatory self-replacement are to be installed by customers, unless you are willing to pay HP service personnel to perform the repair. For these parts, on-site or return-to-depot support is not provided under the HP printer warranty.
• Parts listed as Optional self-replacement can be installed by HP service personnel at your request for no additional charge during the printer warranty period.

Table 3-3 Customer self-repair parts

Item Description Self-replacement options Part number
150-sheet paper input tray Replacement cassette for Tray 2 Mandatory RM2-6377-000CN
550-sheet paper feeder	Replacement optional Tray 3	Mandatory	CF404-67901

Dynamic security

Learn about dynamic-security-enabled printers.

Certain HP printers use cartridges that have security chips or electronic circuitry. Cartridges using a non-HP chip or modified or non-HP circuitry* might not work. And, those that work today might not work in the future.

As is standard in the printing business, HP has a process for authenticating cartridges. HP continues to use security measures to protect the quality of our customer experience, maintain the integrity of our printing systems, and protect our intellectual property. These measures include authentication methods that change periodically and might prevent some third-party supplies from working now or in the future. HP printers and original HP cartridges deliver the best quality, security and reliability. When cartridges are cloned or counterfeited, the customer is exposed to quality and potential security risks, compromising the printing experience.

*Non-HP Chips and modified or non-HP electronic circuitry are not produced or validated by HP. HP cannot guarantee that these chips or circuitry will work in your printer now or in the future. If you are using a non-original HP cartridge, please check with your supplier to ensure your cartridge has an original HP security chip or unmodified HP electronic circuitry.

Configure the HP toner-cartridge-protection supply settings

A network administrator can configure the toner-cartridge-protection settings using the printer control panel or the HP Embedded Web Server (EWS).

Introduction
- Enable or disable the Cartridge Policy feature
- Enable or disable the Cartridge Protection feature

Introduction

Use HP Cartridge Policy and Cartridge Protection to control which cartridges are installed in the printer and protect the cartridges that are installed from theft.

• Cartridge Policy: This feature protects the printer from counterfeit toner cartridges by allowing only genuine HP cartridges to be used with the printer. Using genuine HP cartridges ensures the best possible print quality. When someone installs a cartridge that is not a genuine HP cartridge, the printer control panel displays a message that the cartridge is unauthorized and it provides information explaining how to proceed.
• Cartridge Protection: This feature permanently associates toner cartridges with a specific printer, or fleet of printers, so they cannot be used in other printers. Protecting cartridges protects your investment. When this feature is enabled, if someone attempts to transfer a protected cartridge from the original printer into an unauthorized printer, that printer will not print with the protected cartridge. The printer control panel displays a message that the cartridge is protected, and it provides information explaining how to proceed.

CAUTION: After enabling cartridge protection for the printer, all subsequent toner cartridges installed in the printer are automatically and permanently protected. To avoid protecting a new cartridge, disable the feature before installing the new cartridge.

Turning the feature off does not turn off protection for cartridges that are currently installed.

Both features are off by default. Follow these procedures to enable or disable them.

Enable or disable the Cartridge Policy feature

The Cartridge Policy feature can be enabled or disabled using the control panel or the Embedded Web Server (EWS).

• Use the printer control panel to enable the Cartridge Policy feature
• Use the printer control panel to disable the Cartridge Policy feature
• Use the HP Embedded Web Server (EWS) to enable the Cartridge Policy feature
• Use the HP Embedded Web Server (EWS) to disable the Cartridge Policy feature
- Troubleshoot Cartridge Policy control panel error messages

NOTE: Enabling or disabling this feature might require entering an administrator password.

Check with your administrator to determine if an administrator password has been set. EWS passwords cannot be recovered.

Use the printer control panel to enable the Cartridge Policy feature

From the printer control panel, a network administrator can enable the Cartridge Policy feature. This allows only genuine HP cartridges to be used with the printer.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Open the following menus:

3. Supply Settings

4. Cartridge Policy

5. Touch Authorized HP to enable the feature.

Use the printer control panel to disable the Cartridge Policy feature

From the printer control panel, a network administrator can disable the Cartridge Policy feature. This removes the restriction that only genuine HP cartridges can be used.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Open the following menus:

3. Supply Settings

4. Cartridge Policy

5. Touch Off to disable the feature.

Use the HP Embedded Web Server (EWS) to enable the Cartridge Policy feature

From the EWS, a network administrator can enable the Cartridge Policy feature. This allows only genuine HP cartridges to be used with the printer.

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel, touch the Wireless icon (1) or the Ethernet icon to view the printer's IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XX.XXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

1. On the EWS Home page, click the Settings tab.

2. In the left navigation pane, click Supplies to expand the options, and then click Supply Settings.

3. In the Cartridge Policy area, click the drop-down menu and select Authorized HP.

4. Click Apply to save the changes.

Use the HP Embedded Web Server (EWS) to disable the Cartridge Policy feature

From the EWS, a network administrator can disable the Cartridge Policy feature. This removes the restriction that only genuine HP cartridges can be used.

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel, touch the Wireless icon (↑) or the Ethernet icon to view the printer's IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XX.XXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

1. On the EWS Home page, click the Settings tab.

2. In the left navigation pane, click Supplies to expand the options, and then click Supply Settings.

3. In the Cartridge Policy area, click the drop-down menu and select Off.

4. Click Apply to save the changes.

Troubleshoot Cartridge Policy control panel error messages

Review the recommended actions for Cartridge Policy error messages.

Table 3-4 Cartridge Policy control panel error messages

Error message Description Recommended action
10.0X.30 Unauthorized<Color> Cartridge The administrator has configured this printer to use only genuine HP supplies that are still under warranty. The cartridge must be replaced to continue printing.	Replace the cartridge with a genuine HP toner cartridge.If you believe you purchased a genuine HP supply, visitwww.hp.com/go/anticounterfeit to determine if the toner cartridge is a genuine HP cartridge, and learn what to do if it is not a genuine HP cartridge.

Enable or disable the Cartridge Protection feature

The Cartridge Protection feature can be enabled or disabled using the control panel or the Embedded Web Server (EWS).

• Use the printer control panel to enable the Cartridge Protection feature
• Use the printer control panel to disable the Cartridge Protection feature
• Use the HP Embedded Web Server (EWS) to enable the Cartridge Protection feature
• Use the HP Embedded Web Server (EWS) to disable the Cartridge Protection feature
- Troubleshoot Cartridge Protection control panel error messages

NOTE: Enabling or disabling this feature might require entering an administrator password.

Check with your administrator to determine if an administrator password has been set. EWS passwords cannot be recovered.

Use the printer control panel to enable the Cartridge Protection feature

From the printer control panel, a network administrator can enable the Cartridge Protection feature. This protects the cartridges associated with the printer from being stolen and used in other printers.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Open the following menus:

3. Supply Settings

4. Cartridge Protection

5. Touch Protect Cartridges to enable the feature.

CAUTION: After enabling cartridge protection for the printer, all subsequent toner cartridges installed in the printer are automatically and permanently protected. To avoid protecting a new cartridge, disable the feature before installing the new cartridge.

Turning the feature off does not turn off protection for cartridges that are currently installed.

Use the printer control panel to disable the Cartridge Protection feature

From the printer control panel, a network administrator can disable the Cartridge Protection feature. This removes protection for any new cartridges installed in the printer.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Open the following menus:

3. Supply Settings

4. Cartridge Protection

5. Touch Off to disable the feature.

Use the HP Embedded Web Server (EWS) to enable the Cartridge Protection feature

From the EWS, a network administrator can enable the Cartridge Protection feature. This protects the cartridges that are associated with the printer from being stolen and used in other printers.

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel, touch the Wireless icon (↑) or the Ethernet icon (☐) to view the printer's IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XXXXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

1. On the EWS Home page, click the Settings tab.

2. In the left navigation pane, click Supplies to expand the options, and then click Supply Settings.

3. In the Cartridge Protection area, click the drop-down menu and select On.

4. Click Apply to save the changes.

CAUTION: After enabling Cartridge Protection for the printer, all subsequent toner cartridges installed in the printer are automatically and permanently protected. To avoid protecting a new cartridge, disable the feature before installing the new cartridge.

Turning the feature off does not turn off protection for cartridges that are currently installed.

Use the HP Embedded Web Server (EWS) to disable the Cartridge Protection feature

From the EWS, a network administrator can disable the Cartridge Protection feature. This removes protection for any new cartridges installed in the printer.

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel, touch the Wireless icon (「) or the Ethernet icon □ to view the printer's IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XX.XXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

1. On the EWS Home page, click the Settings tab.

2. In the left navigation pane, click Supplies to expand the options, and then click Supply Settings.

3. In the Cartridge Protection area, click the drop-down menu and select Off.

4. Click Apply to save the changes.

Troubleshoot Cartridge Protection control panel error messages

Review the recommended actions for Cartridge Protection error messages.

Table 3-5 Cartridge Protection control panel error messages

Error message Description Recommended action
10.0X.57 Protected<Color> Cartridge The cartridge can only be used in the printer or fleet of printers that initially protected it using HP Cartridge Protection.The Cartridge Protection feature allows an administrator to restrict cartridges to work in only one printer or fleet of printers. The cartridge must be replaced to continue printing.		Replace the cartridge with a new toner cartridge.

Replace the toner cartridges

Replace the toner cartridges if you receive a message on the printer, or if you have print quality problems.

• Toner cartridge information
- Remove and replace the toner cartridges

Toner cartridge information

Review details about ordering replacement toner cartridges.

The printer indicates when the toner cartridge level is low. The actual toner cartridge life remaining can vary. Consider having a replacement cartridge available to install when print quality is no longer acceptable.

To purchase cartridges or check cartridge compatibility for the printer, go to HP SureSupply at www.hp.com/go/suresupply. Scroll to the bottom of the page and verify that the country/region is correct.

The printer uses four colors and has a different toner cartridge for each color: yellow (Y), magenta (M), cyan (C), and black (K). The toner cartridges are inside the front door.

CAUTION: Cartridges are for distribution and use within their designated region only; they will not work outside of their designated region.

Table 3-6 Supplies

Item Description Cartridge number Part number
Supplies
For use in North America and Latin America only
HP 414A Black Original LaserJet Toner Cartridge	Standard-capacity replacement black toner cartridge	414A W2020A
HP 414A Cyan Original LaserJet Toner Cartridge	Standard-capacity replacement cyan toner cartridge	414A W2021A
HP 414A Yellow Original LaserJet Toner Cartridge	Standard-capacity replacement yellow toner cartridge	414A W2022A
HP 414A Magenta Original LaserJet Toner Cartridge	Standard-capacity replacement magenta toner cartridge	414A W2023A
HP 414X High Yield Black Original LaserJet Toner Cartridge	High-capacity replacement black toner cartridge	414X W2020X
HP 414X High Yield Cyan Original LaserJet Toner Cartridge	High-capacity replacement cyan toner cartridge	414X W2021X
HP 414X High Yield Yellow Original LaserJet Toner Cartridge	High-capacity replacement yellow toner cartridge	414X W2022X
HP 414X High Yield Magenta Original LaserJet Toner Cartridge	High-capacity replacement magenta toner cartridge	414X W2023X
For use in Europe, Middle East, Russia, CIS, and Africa only
HP 415A Black Original LaserJet Toner Cartridge	Standard-capacity replacement black toner cartridge	415A W2030A
HP 415A Cyan Original LaserJet Toner Cartridge	Standard-capacity replacement cyan toner cartridge	415A W2031A
HP 415A Yellow Original LaserJet Toner Cartridge	Standard-capacity replacement yellow toner cartridge	415A W2032A
HP 415A Magenta Original LaserJet Toner Cartridge	Standard-capacity replacement magenta toner cartridge	415A W2033A
HP 415X High Yield Black Original LaserJet Toner Cartridge	High-capacity replacement black toner cartridge	415X W2030X
HP 415X High Yield Cyan Original LaserJet Toner Cartridge	High-capacity replacement cyan toner cartridge	415X W2031X
HP 415X High Yield Yellow Original LaserJet Toner Cartridge	High-capacity replacement yellow toner cartridge	415X W2032X
HP 415X High Yield Magenta Original LaserJet Toner Cartridge	High-capacity replacement magenta toner cartridge	415X W2033X
For use in Asia Pacific only
HP 416A Black Original LaserJet Toner Cartridge	Standard-capacity replacement black toner cartridge	416A W2040A
HP 416A Cyan Original LaserJet Toner Cartridge	Standard-capacity replacement cyan toner cartridge	416A W2041A
HP 416A Yellow Original LaserJet Toner Cartridge	Standard-capacity replacement yellow toner cartridge	416A W2042A
HP 416A Magenta Original LaserJet Toner Cartridge	Standard-capacity replacement magenta toner cartridge	416A W2043A
HP 416X High Yield Black Original LaserJet Toner Cartridge	High-capacity replacement black toner cartridge	416X W2040X
HP 416X High Yield Cyan Original LaserJet Toner Cartridge	High-capacity replacement cyan toner cartridge	416X W2041X
HP 416X High Yield Yellow Original LaserJet Toner Cartridge	High-capacity replacement yellow toner cartridge	416X W2042X
HP 416X High Yield Magenta Original LaserJet Toner Cartridge	High-capacity replacement magenta toner cartridge	416X W2043X

Do not remove the toner cartridge from its package until it is time to replace it.

CAUTION: To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. If the toner cartridge must be removed from the printer for an extended period of time, place the cartridge in the original plastic packaging, or cover the cartridge with a lightweight opaque item.

The following illustration shows the toner cartridge components.

Figure 3-1 Toner cartridge components

Technical diagram of a mechanical assembly with numbered components labeled 1, 2, and 3.

Number Description

1 Handle
2 Imaging drum
3 Memory chip

CAUTION: If toner gets on clothing, wipe it off by using a dry cloth and wash the clothes in cold water. Hot water sets toner into fabric.
NOTE: Information about recycling used toner cartridges is in the toner cartridge box.

Remove and replace the toner cartridges

Follow these steps to replace the toner cartridge.

1. Open the front door by pressing the button on the left panel.

Diagram showing a device with two labeled arrows pointing to a screen, one pointing to a grid pattern icon and the other to a printer or printer.

1. Grasp the blue handle on the toner cartridge drawer, and then pull out the drawer.

Diagram of a mechanical device with internal compartments and a blue arrow indicating a specific component (no text or symbols present)

1. Grasp the handle on the toner cartridge, and then pull the toner cartridge straight up to remove it.

Mechanical assembly diagram showing a device with a blue arrow indicating a directional component (no text or symbols present)

1. Remove the new toner cartridge package from the box, and then pull the release tab on the packaging.

Technical line drawing of an engine block assembly with a blue arrow indicating direction (no text or symbols)

1. Remove the toner cartridge from the opened packaging shell. Place the used toner cartridge in the shell for recycling.

Diagram showing two mechanical components with a blue upward arrow indicating a process or transformation (no text or symbols present)

1. Hold both ends of the toner cartridge and rock it 5-6 times.

Diagram of a mechanical component with blue and black arrows indicating direction (no text or symbols)

1. Do not touch the imaging drum on the bottom of the toner cartridge. Fingerprints on the imaging drum can cause print-quality problems. Also, do not expose the cartridge to light unnecessarily.

Technical illustration of a mechanical assembly with a red prohibition symbol overlay (no text or symbols present)

1. Insert the new toner cartridge into the drawer. Make sure that the color chip on the cartridge matches the color chip on the drawer.

Diagram of a printer's internal structure showing internal components and a blue arrow indicating a loading or movement (no text or symbols present)

1. Close the toner cartridge drawer.

Diagram of a computer rack with an arrow pointing to a component (no text or symbols present)

1. Close the front door.

Diagram of a computer chassis showing internal components and a blue arrow indicating a specific area (no text or symbols present)

1. Pack the used toner cartridge into the box the new cartridge came in, or use a large cardboard box and fill it with several cartridges you need to recycle. See the enclosed recycling guide for information about recycling.

In the US, a pre-paid shipping label is included in the box. In other countries/regions, go to www.hp.com/recycle to print a pre-paid shipping label.

Adhere the pre-paid shipping label to the box, and return the used cartridge to HP for recycling.

Diagram illustrating two steps of packaging or recycling process with labeled components and recycling symbol

http://www.hp.com/recycle

4 Print

Print using the software, or print from a mobile device or USB flash drive.

• Print tasks (Windows)
• Print tasks (macOS)
• Store print jobs on the printer to print later or print privately
- Mobile printing
• Print from a USB flash drive

For video assistance, see www.hp.com/videos/LaserJet.

For more information:

HP's all-inclusive help for the printer includes the following information:

• Install and configure
- Learn and use
- Solve problems
- Download software and firmware updates
- Join support forums
• Find warranty and regulatory information

Print tasks (Windows)

Learn about common printing tasks for Windows users.

• How to print (Windows)
• Automatically print on both sides (Windows)
• Manually print on both sides (Windows)
• Print multiple pages per sheet (Windows)
• Select the paper type (Windows)
• Additional print tasks

How to print (Windows)

Use the Print option from a software application to select the printer and basic options for your print job.

The following procedure describes the basic printing process for Windows.

1. From the software program, select the Print option.
2. Select the printer from the list of printers. To change settings, click the Properties or Preferences button to open the print driver.

NOTE:

• The name of the button varies for different software programs.
• For the HP PCL-6 V4 driver, the HP AiO Printer Remote application downloads additional driver features when More settings is selected.

• For more information, click the Help (?) button in the print driver.

• Click the tabs in the print driver to configure the available options. For example, set the paper orientation on the Finishing tab, and set the paper source, paper type, paper size, and quality settings on the Paper/Quality tab.

• Click the OK button to return to the Print dialog box. Select the number of copies to print from this screen.
• Click the Print button to print the job.

Automatically print on both sides (Windows)

If your printer has an automatic duplexer installed, you can automatically print on both sides of the paper. Use a paper size and type supported by the duplexer.

1. From the software program, select the Print option.
2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the print driver.

NOTE:

• The name of the button varies for different software programs.
- For the HP PCL-6 V4 driver, the HP AiO Printer Remote application downloads additional driver features when More settings is selected.

1. Click the Finishing tab.
2. Select Print on both sides. Click OK to close the Document Properties dialog.
3. In the Print dialog, click Print to print the job.

Manually print on both sides (Windows)

Use this procedure for printers that do not have an automatic duplexer installed or to print on paper that the duplexer does not support.

1. From the software program, select the Print option.
2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the print driver.

NOTE:

• The name of the button varies for different software programs.

• For the HP PCL-6 V4 driver, the HP AiO Printer Remote application downloads additional driver features when More settings is selected.

• Click the Finishing tab.

• Select Print on both sides (manually), and then click OK to close the Document Properties dialog.
• In the Print dialog, click Print to print the first side of the job.
• Retrieve the printed stack from the output bin, and place it in Tray 1.
• If prompted, select the appropriate control panel button to continue.

Print multiple pages per sheet (Windows)

When you print from a software application using the Print option, you can select an option to print multiple pages on a single sheet of paper. For example, you might want to do this if you are printing a very large document and want to save paper.

1. From the software program, select the Print option.
2. Select the printer from the list of printers, and then click the Properties or Preferences button to open the print driver.

NOTE:

• The name of the button varies for different software programs.

• For the HP PCL-6 V4 driver, the HP AiO Printer Remote application downloads additional driver features when More settings is selected.

• Click the Finishing tab.

• Select the number of pages per sheet from the Pages per sheet drop-down.

• Select the correct Print page borders, Page order, and Orientation options. Click OK to close the Document Properties dialog.
• In the Print dialog, click Print to print the job.

Select the paper type (Windows)

When you print from a software application using the Print option, you can set the paper type you are using for your print job. For example, if your default paper type is Letter, but you are using a different paper type for a print job, select that specific paper type.

1. From the software program, select the Print option.
2. Select the printer from the list of printers, and then click or tap the Properties or Preferences button to open the print driver.

NOTE:

●The name of the button varies for different software programs.
- For the HP PCL-6 V4 driver, the HP AiO Printer Remote application downloads additional driver features when More settings is selected.

1. Click the Paper/Quality tab.

2. Select the option for the type of paper you are using, and then click OK.

3. Click OK to close the Document Properties dialog.
4. In the Print dialog, click Print to print the job.

Additional print tasks

Locate information on the Web for performing common printing tasks.

Go to www.hp.com/support/colorljM479MFP.

Instructions are available for print tasks, such as the following:

• Create and use printing shortcuts or presets
• Select the paper size, or use a custom paper size
• Select the page orientation
• Create a booklet

• Scale a document to fit a specific paper size
• Print the first or last pages of the document on different paper
• Print watermarks on a document

Print tasks (macOS)

Print using the HP printing software for macOS, including how to print on both sides or print multiple pages per sheet.

• How to print (macOS)
• Automatically print on both sides (macOS)
• Manually print on both sides (macOS)
• Print multiple pages per sheet (macOS)
• Select the paper type (macOS)
• Additional print tasks

How to print (macOS)

Use the Print option from a software application to select the printer and basic options for your print job.

The following procedure describes the basic printing process for macOS.

1. Click the File menu, and then click the Print option.
2. Select the printer.
3. Click Show Details or Copies & Pages, and then select other menus to adjust the print settings.

NOTE: The name of the item varies for different software programs.

1. Click the Print button.

Automatically print on both sides (macOS)

If your printer has an automatic duplexer installed, you can automatically print on both sides of the paper. Use a paper size and type supported by the duplexer.

This feature is available if you install the HP print driver. It might not be available if you are using AirPrint.

1. Click the File menu, and then click the Print option.
2. Select the printer.
3. Click Show Details or Copies & Pages, and then click the Layout menu.
   NOTE: The name of the item varies for different software programs.
4. Select a binding option from the Two-Sided drop-down list.
5. Click the Print button.

Manually print on both sides (macOS)

If your printer does not have an automatic duplexer installed, or you are using a paper size or type not supported by the duplexer, you can print on both sides of the paper using a manual process. You will need to reload the pages for the second side.

This feature is available if you install the HP print driver. It might not be available if you are using AirPrint.

1. Click the File menu, and then click the Print option.
2. Select the printer.
3. Click Show Details or Copies & Pages, and then click the Manual Duplex menu.

NOTE: The name of the item varies for different software programs.

1. Click the Manual Duplex check box, and select a binding option.
2. Go to the printer, and remove any blank paper that is in Tray 1.
3. Click the Print button.
4. Retrieve the printed stack from the output bin and place it with the printed-side facing down in the input tray.
5. If prompted, touch the appropriate control panel button to continue.

Print multiple pages per sheet (macOS)

When you print from a software application using the Print option, you can select an option to print multiple pages on a single sheet of paper. For example, you might want to do this if you are printing a very large document and want to save paper.

1. Click the File menu, and then click the Print option.
2. Select the printer.
3. Click Show Details or Copies & Pages, and then click the Layout menu.

NOTE: The name of the item varies for different software programs.

1. From the Pages per Sheet drop-down list, select the number of pages that you want to print on each sheet.
2. In the Layout Direction area, select the order and placement of the pages on the sheet.
3. From the Border menu, select the type of border to print around each page on the sheet.
4. Click the Print button.

Select the paper type (macOS)

When you print from a software application using the Print option, you can set the paper type you are using for your print job. For example, if your default paper type is Letter, but you are using a different paper type for a print job, select that specific paper type.

1. Click the File menu, and then click the Print option.
2. Select the printer.
3. Click Show Details or Copies & Pages, and then click the Media & Quality menu or the Paper/Quality menu.

NOTE: The name of the item varies for different software programs.

1. Select from the Media & Quality or Paper/Quality options.

NOTE: This list contains the master set of options available. Some options are not available on all printers.

• Media Type: Select the option for the type of paper for the print job.
- Print Quality: Select the resolution level for the print job.
- EconoMode: Select this option to conserve toner when printing drafts of documents.

5. Click the Print button.

Additional print tasks

Locate information on the Web for performing common printing tasks.

Go to www.hp.com/support/colorljM479MFP.

Instructions are available for print tasks, such as the following:

• Create and use printing shortcuts or presets
• Select the paper size, or use a custom paper size
• Select the page orientation
• Create a booklet
  • Scale a document to fit a specific paper size
  • Print the first or last pages of the document on different paper
• Print watermarks on a document

Store print jobs on the printer to print later or print privately

Store print jobs in the printer memory for printing at a later time.

Introduction
Before beginning
- Set up job storage
- Disable or enable the job storage feature
• Create a stored job (Windows)
• Create a stored job (macOS)
- Print a stored job
- Delete a stored job

• Information sent to printer for Job Accounting purposes

Introduction

The following information provides procedures for creating and printing documents that are stored on the USB flash drive. These jobs can be printed at a later time or printed privately.

Before beginning

Review the requirements for using the job storage feature.

The job storage feature has the following requirements:

A dedicated USB 2.0 storage device with at least 16 GB free space must be installed in the rear host USB. This USB storage device holds the job storage jobs sent to the printer. Removing this USB storage device from the printer disables the job storage feature.
If you are using an HP Universal Print Driver (UPD), you must use UPD version 5.9.0 or above.

Set up job storage

Set up job storage in the print driver, insert the storage media (USB flash drive) in the printer, and verify the feature is ready to use.

Before you begin, install the printer software if it is not already installed. Go to www.hp.com/support, click Software and Drivers, and then follow the onscreen instructions to download the latest HP software.

When the print driver is installed, the Job Storage option is set to Automatic by default. The option is located as follows:

• Windows: Devices and Printers▶ Printer Properties▶ Device Settings
  • macOS: Printers & Scanners▶ Options & Supplies

To complete Job Storage setup:

1. Locate the rear USB port.

On some models, the rear USB port is covered. Remove the rear USB port cover before proceeding.

1. Insert the USB flash drive into the rear USB port.

Figure 4-1 Insert USB flash drive

Diagram showing a blue arrow pointing to a door panel with two windows (no text or symbols)

A message displays on the control panel warning that the USB drive will be formatted. Select OK to complete the procedure.

1. Open the print driver to verify the Job Storage tab is visible. If it is visible, the feature is ready to use.

From a software program, select the Print option, select your printer from the list of printers, and do the following:

- Windows: Select Properties or Preferences. Click the Job Storage tab.

If the Job Storage tab is not showing, activate it as follows:

From the Start menu, open Settings, click Devices, and then click Devices and Printers. Right-click on the printer name and click Printer Properties. Click the Device Settings tab, click on Job Storage, and then select Automatic. Click Apply and OK.

- macOS: The print driver displays the Copies & Pages menu. Open the drop-down list, and then click the Job Storage menu.

If the Job Storage menu is not showing, close the Print window and then reopen it to activate the menu.

Disable or enable the job storage feature

Disable the job storage feature to make it unavailable, even if a USB drive is inserted into the printer. Enable the feature to make it available again.

1. Open the Printer Properties:

2. Windows: From the Start menu, open Settings, click Devices, and then click Devices and Printers. Right-click on the printer and click Printer properties.

3. macOS: From the Apple menu, open System Preferences, and then click Printers & Scanners. Select the printer and click Options & Supplies.

4. Disable the Job Storage option as follows:

5. Windows: Click the Device settings tab, click on Job Storage, and then select Disable.
   • macOS: On the Options tab, clear the Job Storage check box.

To enable the feature, set the Job Storage option back to Automatic (Windows), or select the Job Storage check box (macOS).

Create a stored job (Windows)

Store jobs on the USB flash drive for private or delayed printing.

1. From the software program, select the Print option.

2. Select the printer from the list of printers, and then select Properties or Preferences.

NOTE:

• The name of the button varies for different software programs.
- For the HP PCL-6 V4 driver, the HP AiO Printer Remote application downloads additional driver features when More settings is selected.

1. Click the Job Storage tab.

NOTE: If the Job Storage tab is not showing, follow the instructions in the "Disable or enable job storage feature" section to activate the tab.

1. Select a Job Storage Mode option:

2. Proof and Hold: Print and proof one copy of a job, and then print more copies. The first copy prints immediately. Printing of the subsequent copies must be initiated from the device's front control panel. For example, if 10 copies are sent, one copy prints immediately, and the other nine copies will print when the job is retrieved. The job is deleted after all copies are printed.

3. Personal Job: The job does not print until you request it at the printer control panel. For this job-storage mode, you can select one of the Make Job Private/Secure options. If you assign a personal identification number (PIN) to the job, you must provide the required PIN at the control panel. If you encrypt the job, you must provide the required password at the control panel. The print job is deleted from memory after it prints.
4. Quick Copy: Print the requested number of copies of a job and store a copy of the job in the printer memory so you can print it again later. The job is deleted manually or by the job retention schedule.

5. Stored Job: Store a job on the printer and allow other users to print the job at any time. For this job-storage mode, you can select one of the Make Job Private/Secure options. If you assign a personal identification number (PIN) to the job, the person who prints the job must provide the required PIN at the control panel. If you encrypt the job, the person who prints the job must provide the required password at the control panel. The job is deleted manually or by the job retention schedule.

6. To use a custom user name or job name, click the Custom button, and then enter the user name or the job name.

Select which option to use if another stored job already has that name:

• Use Job Name + (1-99): Append a unique number to the end of the job name.
- Replace Existing File: Overwrite the existing stored job with the new one.

1. Click the OK button to close the Document Properties dialog box. In the Print dialog box, click the Print button to print the job.

Create a stored job (macOS)

Store jobs on the USB flash drive for private or delayed printing.

1. Click the File menu, and then click the Print option.

2. In the Printer menu, select the printer.

3. Click Show Details or Copies & Pages, and then click the Job Storage menu.

NOTE: If the Job Storage menu is not showing, follow the instructions in the "Disable or enable job storage feature" section to activate the menu.

1. In the Mode drop-down list, select the type of stored job.

2. Proof and Hold: Print and proof one copy of a job, and then print more copies. The first copy prints immediately. Printing of the subsequent copies must be initiated from the device's front control panel. For example, if 10 copies are sent, one copy prints immediately, and the other nine copies will print when the job is retrieved. The job is deleted after all copies are printed.

3. Personal Job: The job does not print until someone requests it at the printer control panel. If the job has a personal identification number (PIN), provide the required PIN at the control panel. The print job is deleted from memory after it prints.
4. Quick Copy: Print the requested number of copies of a job and store a copy of the job in the printer memory to print it again later. The job is deleted manually or by the job retention schedule.

5. Stored Job: Store a job on the printer and allow other users to print the job at any time. If the job has a personal identification number (PIN), the person who prints the job must provide the required PIN at the control panel. The job is deleted manually or by the job retention schedule.

6. To use a custom user name or job name, click the Custom button, and then enter the user name or the job name.

NOTE: macOS 10.14 Mojave and later: The print driver no longer includes the Custom button. Use the options below the Mode drop-down list to set up the saved job.

Select which option to use if another stored job already has that name.

• Use Job Name + (1-99): Append a unique number to the end of the job name.

- Replace Existing File: Overwrite the existing stored job with the new one.

1. If you selected the Stored Job or Personal Job option in the Mode drop-down list, you can protect the job with a PIN. Type a 4-digit number in the Use PIN to Print field. When other people attempt to print this job, the printer prompts them to enter this PIN.

2. Click the Print button to process the job.

Print a stored job

Print a job that is stored on a USB flash drive.

1. From the Home screen on the printer control panel, touch the Print icon, and then touch Job Storage.
2. Scroll to and touch the name of the folder where the job is stored.
3. Scroll to and touch the name of the job that you want to print.

If the job is private or encrypted, enter the PIN or password, and then touch Done.

1. To adjust the number of copies, touch the box to the left of the Print button and then enter the number of copies using the touch keypad. Touch Done to close the keypad.
2. Touch Print to print the job.

Delete a stored job

When a new job is stored on a USB flash drive, any previous jobs with the same user and job name are overwritten. If the memory on the USB flash drive is full, the following message displays on the printer control panel: The USB flash storage device is out of memory. Delete unused jobs, and then try again. Existing stored jobs must be deleted before additional print jobs can be stored.

- Delete a job that is stored on the printer

Delete a job that is stored on the printer

Delete a job that is stored on a USB flash drive.

1. From the Home screen on the printer control panel, touch the Print icon, and then touch Job Storage.
2. Scroll to and touch the name of the folder where the job is stored.
3. Scroll to and touch the name of the job that you want to delete.

If the job is private or encrypted, enter the PIN or password, and then touch Done.

1. Touch the Trash icon 📄, and then touch Delete to delete the job.

Information sent to printer for Job Accounting purposes

Printing jobs sent from drivers on the client (e.g., PC) may send personally identifiable information to HP's Printing and Imaging devices. This information may include, but is not limited to, user name and client name from which the job originated that may be used for job accounting purposes, as determined by the Administrator of the printing device. This same information may also be stored with the job on the mass storage device (e.g., disk drive) of the printing device when using the job storage feature.

Mobile printing

Mobile and ePrint solutions enable easy printing to an HP printer from a laptop, tablet, smartphone, or other mobile device.

Introduction
• Wi-Fi Direct printing (wireless models only)
HP ePrint via Email
AirPrint
• Android embedded printing

Introduction

Review the following information about mobile printing.

To see the full list of mobile and ePrint solutions and determine the best choice, go to www.hp.com/go/LaserJetMobilePrinting.

Wi-Fi Direct printing (wireless models only)

Wi-Fi Direct enables printing from a wireless mobile device without requiring a connection to a network or the Internet.

• To turn on Wi-Fi Direct
• Change the printer Wi-Fi Direct name

NOTE: Not all mobile operating systems are currently supported by Wi-Fi Direct.

Use Wi-Fi Direct to print wirelessly from the following devices:

• Android mobile devices compatible with the Android embedded print solution
• iPhone, iPad, or iPod touch using Apple AirPrint or the HP Smart app
• Android mobile devices using the HP Smart app or the Android embedded print solution
  • PC and Mac devices using the HP ePrint Software
  HP Roam

For more information on Wi-Fi Direct printing, go to www.hp.com/go/wirelessprinting.

Wi-Fi Direct can be enabled or disabled from the printer control panel.

To turn on Wi-Fi Direct

To print wirelessly from mobile devices, Wi-Fi Direct must be turned on.

Follow these steps to turn on Wi-Fi Direct from the printer control panel.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Wi-Fi Direct icon

2. Touch the Settings icon.

3. If Wi-Fi Direct is set to Off, touch the switch to turn it on.

NOTE: In environments where more than one model of the same printer is installed, it might be helpful to provide each printer a unique Wi-Fi Direct name for easier printer identification when using Wi-Fi Direct printing.

To view the Wi-Fi Direct Name on the printer control panel, go to the Home screen, swipe the Dashboard tab downward, and then touch the Wi-Fi Direct icon

Change the printer Wi-Fi Direct name

Change the printer Wi-Fi Direct name using the HP Embedded Web Server (EWS):

• Step one: Open the HP Embedded Web Server
• Step two: Change the Wi-Fi Direct name

Step one: Open the HP Embedded Web Server

Use the EWS to manage your printer from a computer instead of the printer control panel.

Your printer must be connected to an IP-based network before you can access the EWS.

1. From the Home screen on the printer control panel, touch the Wireless icon (「) or the Ethernet icon □ to view the printer's IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XXXXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

Step two: Change the Wi-Fi Direct name

Use the following procedure to change the Wi-Fi Direct name.

1. On the EWS Home page, click the Network tab.
2. In the left navigation pane, click Wi-Fi Direct.
3. Under the Status field, click Edit Settings.
4. In the Wi-Fi Direct Name field, enter the new name, and then click Apply.

HP ePrint via Email

Use HP ePrint to print documents by sending them as an email attachment to the printer's email address from any email-enabled device.

To use HP ePrint, the printer must meet these requirements:

• The printer must be connected to a wired or wireless network and have Internet access.
  HP Web Services must be enabled on the printer, and the printer must be registered with HP Connected.

Follow these steps to enable HP Web Services and register with HP Connected:

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the HP ePrint icon 📊

2. On the HP ePrint screen, touch Setup in the lower right corner.

3. On the Setup Web Services screen, read the terms of use agreement, and then touch Yes to accept the terms and enable HP Web Services.
   The printer enables Web Services and then prints an information page. The information page contains the printer code that is necessary to register the printer at HP Connected.

4. Go to www.hpconnected.com to create an HP ePrint account and complete the setup process.

AirPrint

With Apple AirPrint, you can print directly to the printer from your iOS device or Mac computer, without having a print driver installed.

AirPrint is supported for iOS and from Mac computers running macOS (10.7 Lion and newer).

Use AirPrint to print directly to the printer from an iPad, iPhone (3GS or later), or iPod touch (third generation or later) in the following mobile applications:

Mail
•Photos
• Safari
iBooks
- Select third-party applications

To use AirPrint, the printer must be connected to the same network (sub-net) as the Apple device. For more information about using AirPrint and about which HP printers are compatible with AirPrint, go to www.hp.com/go/LaserJetMobilePrinting.

NOTE: Before using AirPrint with a USB connection, verify the version number. AirPrint versions 1.3 and earlier do not support USB connections.

Android embedded printing

HP's built-in print solution for Android and Kindle enables mobile devices to automatically find and print to HP printers that are either on a network or within wireless range for Wi-Fi Direct printing.

The printer must be connected to the same network (sub-net) as the Android device.

The print solution is built into the supported operating systems, so installing drivers or downloading software is not necessary.

For more information on how to use Android embedded printing and which Android devices are supported, go to www.hp.com/go/LaserJetMobilePrinting.

Print from a USB flash drive

Learn how to print directly from a USB flash drive.

Introduction
• Print USB documents

Introduction

This printer features walk-up USB printing, for quickly printing files without sending them from a computer. The printer accepts standard USB flash drives in the USB port that is located below the control panel. It supports the following types of files:

.pdf
.jpg
•.prn and .PRN
•.pcl and .PCL
- .ps and .PS
.doc and .docx
•.ppt and .pptx

Print USB documents

Use the following procedure to print USB documents.

1. Insert the USB flash drive into the USB port on the front of the printer.
   A Reading... message displays on the printer control panel.

2. On the Memory Device Options screen, touch Print Documents.

3. Scroll to and touch the name of the file that you want to print. If the file is stored in a folder, touch the name of the folder, and then scroll to and touch the name of the file.

4. When the Print from USB menu displays, touch any of the following menu items to change the settings for the print job:

• 2-Sided
- Tray Selection
• Copies
•Quality

For additional options, touch the Settings icon ⚙️

1. Touch Print to print the job.

2. Retrieve the printed job from the output bin, and then remove the USB flash drive from the USB port.

5 Copy

Make copies with the printer, learn how to copy a two-sided document, and locate additional copy tasks on the Web.

Make a copy
• Copy on both sides (duplex)
• Copy an identification card
• Additional copy tasks

For more information:

HP's all-inclusive help for the printer includes the following information:

• Install and configure
- Learn and use
- Solve problems
- Download software and firmware updates
- Join support forums
• Find warranty and regulatory information

Make a copy

Copy a document or picture from the scanner glass or automatic document feeder.

1. Load the original print-side down on the scanner glass or print-side up in the automatic document feeder.
2. From the Home screen on the printer control panel, touch the Copy icon.
3. Touch the Document icon.
4. On the Document Copy menu, select the settings for your copy job.
   For additional copy options, touch the Settings icon ⚙️
5. To adjust the number of copies, touch the box to the left of the Copy button and then enter the number of copies using the touch keypad. Touch Done close the keypad.
6. Touch Copy to begin copying.

Copy on both sides (duplex)

The printer allows you to copy a two-sided document. You can select an automatic or manual method, depending on if you copy from a document feeder or from the scanner glass.

• Copy on both sides automatically
• Copy on both sides manually

Copy on both sides automatically

Use the automatic document feeder to copy a two-sided document without manual intervention.

1. Load the original documents into the document feeder with the first page facing up, and with the top of the page leading.
2. Adjust the paper guides to fit the size of the document.
3. From the Home screen on the printer control panel, touch the Copy icon.
4. Touch the Document icon.
5. Touch 2-Sided, and then touch the option you want to use for your copy job.
6. Touch the Copy button to start copying.

Copy on both sides manually

Use the scanner to copy a two-sided document using a manual process. The printer prompts when to place and copy each page.

1. Place the document face-down on the scanner glass with the upper-left corner of the page in the upper-left corner of the glass, and then close the scanner lid.
2. From the Home screen on the printer control panel, touch the Copy icon.
3. Touch the Document icon.
4. Touch 2-Sided, and then touch the option you want to use for your copy job.
5. Touch the Copy button to start copying.
6. The printer prompts you to load the next original document. Place it on the glass, and then touch the OK button.
7. Repeat this process until you have scanned the last page. Touch the Done button to finish printing the copies.

Copy an identification card

Use this feature to copy both sides of an identification card, or other small-sized documents, onto the same side of one sheet of paper. The printer prompts you to copy the first side, and then turn the card over to copy the other side.

1. Place the ID card onto the scanner glass, near the icon at the back left corner, and slightly away from the edges of the scanner glass.
2. Close the scanner lid.
3. From the Home screen on the printer control panel, touch the Copy icon.
4. Touch the ID Card icon.
5. Select the copy orientation and tray settings, and then touch Copy.
6. Follow the prompts on the control panel screen to copy the first side of the ID card and then turn the card over to copy the other side.

Additional copy tasks

Locate information on the Web for performing common copy tasks.

Go to www.hp.com/support/colorljM479MFP.

Instructions are available for copy tasks, such as the following:

• Copy or scan pages from books or other bound documents
• Copy mixed-size documents
• Copy or scan a document into a booklet format

6 Scan

Scan using the software, or scan directly to email, a USB flash drive, a network folder or another destination.

• Scan by using HP Scan software (Windows)
• Scan by using HP Easy Scan Software (macOS)
- Set up Scan to Email
• Set up Scan to Network Folder
• Set up Scan to SharePoint
• Set up Scan to Computer (Windows)
- Scan to a USB flash drive
- Scan to email
- Scan to a network folder
- Scan to SharePoint
- Scan to a computer (Windows)
• Additional scan tasks

For more information:

HP's all-inclusive help for the printer includes the following information:

• Install and configure
- Learn and use
- Solve problems
- Download software and firmware updates
- Join support forums
• Find warranty and regulatory information

Scan by using HP Scan software (Windows)

Use the HP Scan software to initiate scanning from software on your computer. You can save the scanned image as a file or send it to another software application.

1. Open the HP Printer Assistant.

2. Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

3. Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer name.
4. Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the printer name.

5. Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the printer name.

6. In the HP Printer Assistant, select Scan, and then select Scan a Document or Photo.

7. Adjust the settings if necessary.

8. Click Scan.

Scan by using HP Easy Scan Software (macOS)

Use the HP Easy Scan software to initiate scanning from software on your computer.

1. Load the document in the document feeder or on the scanner glass according to the indicators on the printer.
2. From the computer, open HP Easy Scan, which is located in the Applications folder.
3. Follow the on-screen instructions to scan the document.
4. When you have scanned all the pages, click File and then Save to save them to a file.

Set up Scan to Email

The Scan to Email feature allows you to scan a document and send it directly to one or more email addresses. The printer must be connected to a network, and the Scan to Email feature must be set up by a network administrator before it can be used.

Introduction
Before you begin
• Method one: Use the Scan to Email Wizard (Windows)
• Method two: Set up the Scan to Email feature via the HP Embedded Web Server

Introduction

There are two methods for configuring Scan to Email, the Scan to Email Setup Wizard (Windows), which is installed in the HP program group for the printer as part of the full software installation, and the Scan to Email Setup through the HP Embedded Web Server (EWS).

Before you begin

To set up the Scan to Email feature, the network administrator needs access to the printer and to SMTP information, including the server, port, and other authentication requirements. The printer must have an active network connection to the same network as the computer that will run the setup process.

Administrators need the following information before beginning the configuration process.

• Administrative access to the printer
  • SMTP server (e.g., smtp.mycompany.com)

NOTE: If you do not know the SMTP server name, SMTP port number, or authentication information, contact the email/Internet service provider or system administrator for the information. SMTP server names and port names are typically easy to find by doing an Internet search. For example, use terms like "gmail smtp server name" or "yahoo smtp server name" to search.

• SMTP port number
• SMTP server authentication requirements for outgoing email messages, including the user name and password used for authentication, if applicable.

NOTE: Consult your email service provider's documentation for information on digital sending limits for your email account. Some providers may temporarily lock your account if you exceed your sending limit.

Method one: Use the Scan to Email Wizard (Windows)

Use the Scan to Email Wizard, available from the HP Printer Assistant application (Windows), to set up the Scan to Email feature.

Some operating systems do not support the Scan to Email Wizard.

1. Open the HP Printer Assistant.

2. Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

3. Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer name.
4. Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the printer name.

5. Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the printer name.

6. In the HP Printer Assistant, select Scan, and then select Scan to E-mail Wizard.

NOTE: If the Scan to E-mail Wizard option is not available, use Method two: Set up the Scan to Email feature via the HP Embedded Web Server on page 78.

1. In the Outgoing Email Profiles dialog, click the New button. The Scan to Email Setup dialog opens.
2. On the 1. Start page, enter the sender's email address in the Email Address field.
3. In the Display Name field, enter the sender's name. This is the name that will display on the printer control panel.
4. To require a PIN to be entered on the printer control panel before the printer can send an email, enter a 4-digit PIN in the Security PIN field, and then re-enter the PIN in the Confirm Security PIN field, and then click Next.
   HP recommends creating a PIN to secure the email profile. When a PIN is created, it must be entered on the printer control panel each time the profile is used to send a scan to email.
5. On the 2. Authenticate page, enter the SMTP Server name and SMTP Port number.

NOTE: In most cases, the default port number does not need to be changed.

NOTE: If you are using a hosted SMTP service such as Gmail, verify the SMTP address, port number, and SSL settings from the service provider's website or other sources. Typically, for Gmail, the SMTP address is smtp.gmail.com, port number 465, and the SSL should be enabled.

Please refer to online sources to confirm these server settings are current and valid at the time of configuration.

1. If you are using Google™ Gmail for email service, select the Always use secure connection (SSL/TLS) check box.

2. Select the Maximum Size of Email from the drop-down menu.
   HP recommends using the default file size of Automatic for the maximum size.

3. If the SMTP server requires authentication to send an email, select the Email Log-in Authentication check box, enter the User ID and Password, and then click Next.

4. On the 3. Configure page, to automatically copy the sender on email messages sent from the profile, select Include sender in all email messages sent out successfully from the printer, and then click Next.

5. On the 4. Finish page, review the information and verify all the settings are correct. If there is an error, click the Back button to correct the error. If the settings are correct, click the Save and Test button to test the configuration.

6. When the Congratulations message displays, click Finish to complete the configuration.

7. The Outgoing Email Profiles dialog now shows the newly added sender email profile. Click Close to exit the wizard.

Method two: Set up the Scan to Email feature via the HP Embedded Web Server

Use the HP Embedded Web Server (EWS) to set up the Scan to Email feature. This method is available for all supported operating systems.

• Step one: Access the HP Embedded Web Server (EWS)
• Step two: Configure the Scan to Email feature

Step one: Access the HP Embedded Web Server (EWS)

Locate the printer's IP address and then enter it into a Web browser to access the EWS.

Your printer must be connected to an IP-based network before you can access the EWS.

1. From the Home screen on the printer control panel, touch the Wireless icon ( F ) or the Ethernet icon to view the printer's IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XXXXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

Step two: Configure the Scan to Email feature

Use the Embedded Web Server (EWS) to set up the Scan to Email feature. Define the email settings and the default scan and file options, and add contacts to the Address Book.

1. On the Home tab in the EWS, click Scan to Email.
2. On the Outgoing Email Settings page that appears, do the following:
3. If your organization uses one email server for all its emails: Set up your email addresses and the SMTP server information. Click Apply.
4. If your organization uses multiple email servers for its emails: Set up the email addresses, names, and security PINs for each email profile. Click Apply.

After completing the email settings, the EWS displays the Scan tab.

1. On the Scan tab, click Scan to Email, and then click Default Settings. Select your default scan and file settings, and then click Apply.

2. Set up your contact list or lists. On the Scan tab, click Address Book.

3. A local address book can be set up on the device. Click Contacts to configure a local address book.

4. A Network Directory Server (LDAP) can be set up to search for users within a company. Click Address Book Settings to configure LDAP.

5. After setting up your contacts, click Apply.

Set up Scan to Network Folder

The Scan to Folder feature allows you to scan a document directly to network folder. The printer must be connected to a network, and the Scan to Folder feature must be set up by a network administrator before it can be used.

Introduction
Before you begin
• Method one: Use the Scan to Network Folder Wizard (Windows)
• Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server

Introduction

There are two methods for configuring Scan to network folder, the Scan to Network Folder Wizard (Windows), which is installed in the HP program group for the printer as part of the full software installation, and the Network Folder Setup through the HP Embedded Web Server (EWS).

Before you begin

To set up the Scan to Folder feature, the network administrator needs access to the printer and information about the network path and destination folder. The printer must have an active network connection to the same network as the computer that will run the setup process.

Administrators need the following information before beginning the configuration process.

• Administrative access to the printer
• The network path of the destination folder (e.g., \servername.us.companyname.net\scans)

NOTE: The network folder must be set up as a shared folder for the Scan to Network Folder feature to work.

Method one: Use the Scan to Network Folder Wizard (Windows)

Use the Scan to Network Folder Wizard, available from the HP Printer Assistant application (Windows), to set up the Scan to Network Folder feature.

Some operating systems do not support the Scan to Network Folder Wizard.

1. Open the HP Printer Assistant.

2. Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

3. Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer name.

4. Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the printer name.

5. Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the printer name.

6. In the HP Printer Assistant, select Scan, and then select Scan to Network Folder Wizard.

NOTE: If the Scan to Network Folder Wizard option is not available, use Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server on page 82.

1. In the Network Folder Profiles dialog, click the New button. The Scan to Network Folder Setup dialog opens.
2. On the 1. Start page, enter the folder name in the Display Name field. This is the name that will display on the printer control panel.
3. Complete the Destination Folder field in one of the following ways:

a. Enter the file path manually.
b. Click the Browse button and navigate to the folder location.
c. Complete the following task to create a shared folder:

1. Click Share Path.
2. In the Manage Network Shares dialog, click New.
3. In the Share Name field, enter the name to display for the shared folder.
4. To complete the Folder Path field, click the Browse button, and then select one of the following options. Click OK when done.

—Navigate to an existing folder on the computer.

— Click Make New Folder to create a new folder.

1. If the shared path needs a description, enter a description in the Description field.
2. In the Share Type field, select one of the following options, and then click Apply.

—Public

-Private

NOTE: For security considerations, HP recommends selecting Private as the share type.

1. When a The share was successfully created message displays, click OK.

2. Select the check box for the destination folder, and then click OK.

3. To create a shortcut to the network folder on the computer desktop, select the Create a Desktop shortcut to the network folder check box.

4. To require a PIN to be entered on the printer control panel before the printer can send a scanned document to a network folder, enter a 4-digit PIN in the Security PIN field, and then re-enter the PIN in the Confirm Security PIN field. Click Next.

HP recommends creating a PIN to secure the destination folder. When a PIN is created, it must be entered on the printer control panel each time a scan is sent to the network folder.

1. On the 2. Authenticate page, enter the Windows User Name and Windows Password used to log in to the computer, and then click Next.
2. On the 3. Configure page, select the default scan settings by completing the following task, and then click Next.

a. From the Document Type drop-down, select the default file format for scanned files.
b. From the Color Preference drop-down, select Black & White or Color.
c. From the Paper Size drop-down, select the default paper size for scanned files.
d. From the Quality Settings drop-down, select the default resolution for scanned files.

NOTE: Higher resolution images have more dots per inch (dpi), so they show more detail. Lower resolution images have fewer dots per inch and show less detail, but the file size is smaller.

e. In the Filename Prefix field, enter a file name prefix (e.g., MyScan).

1. On the 4. Finish page, review the information and verify all the settings are correct. If there is an error, click the Back button to correct the error. If the settings are correct, click the Save and Test button to test the configuration.
2. When the Congratulations message displays, click Finish to complete the configuration.
3. The Network Folder Profiles dialog now shows the newly added sender email profile. Click Close to exit the wizard.

Method two: Set up the Scan to Network Folder feature via the HP Embedded Web Server

Use the HP Embedded Web Server (EWS) to set up the Scan to Network Folder feature. This method is available for all supported operating systems.

• Step one: Access the HP Embedded Web Server (EWS)
- Step two: Configure the Scan to Network Folder feature

Step one: Access the HP Embedded Web Server (EWS)

Locate the printer's IP address and then enter it into a Web browser to access the EWS.

Your printer must be connected to an IP-based network before you can access the EWS.

1. From the Home screen on the printer control panel, touch the Wireless icon (「) or the Ethernet icon □ to view the printer's IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XXXXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

Step two: Configure the Scan to Network Folder feature

Use the Embedded Web Server (EWS) interface to set up the Scan to Folder feature.

1. On the Settings tab in the EWS, click Control Panel Customization, and then click Quick Sets.
2. Click + (Add), for Type select Scan to Network Folder, and follow the onscreen instructions for adding a Quick Set profile for a network folder. When finished, click Next.
3. In this page, follow the onscreen instructions for setting up the network folder, authentication requirements, and scan and file configurations. When finished, click Apply.
4. In the settings page, follow the onscreen instructions for configuring scan settings, such as paper size and scan resolution. When finished, click Save.

NOTE: You can change the default scan and file settings for future Scan to Network Folder Quick Sets. In the EWS, click the Scan tab, click Scan to Network Folder, and then click Default Settings.

Set up Scan to SharePoint

Learn how to set up the Scan to SharePoint feature in the Embedded Web Server (EWS) so you can scan and save files to a SharePoint site from the printer.

- Step one: Access the HP Embedded Web Server (EWS)

• Step two: Set up Scan to SharePoint

NOTE: Scan to SharePoint is not supported with SharePoint 365.

Step one: Access the HP Embedded Web Server (EWS)

Locate the printer's IP address and then enter it into a Web browser to access the EWS.

Your printer must be connected to an IP-based network before you can access the EWS.

1. From the Home screen on the printer control panel, touch the Wireless icon (「) or the Ethernet icon □ to view the printer's IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XXXXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

Step two: Set up Scan to SharePoint

Use the Embedded Web Server (EWS) interface to set up the Scan to SharePoint feature.

1. On the Settings tab, click Control Panel Customization, and then click Quick Sets.
2. Click + (Add), for Type select Scan to SharePoint, and follow the onscreen instructions for adding a Quick Set profile for the SharePoint destination. When finished, click Next.
3. In this page, follow the onscreen instructions for setting up the SharePoint destination, authentication requirements, and scan and file configurations. When finished, click Apply.

NOTE: You can change the default scan and file settings for future Scan to SharePoint Quick Sets. In the EWS, click the Scan tab, click Scan to SharePoint, and then click Default Settings.

Set up Scan to Computer (Windows)

Follow the procedure if this feature has been disabled, and you want to enable it.

- Enable scanning to a computer (Windows)

This feature is available for Windows only.

IMPORTANT: For security purposes, scanning remotely is disabled by default. To enable this feature, in the Embedded Web Server, open the Settings tab, click Security, click Administrator Settings, select the Enable checkbox beside Scan from a Computer or Mobile Device, and then click Apply.

When this feature is enabled, anyone with access to the printer can scan whatever is on the scanner glass.

Enable scanning to a computer (Windows)

Use the HP Printer Assistant application to enable Scan to Computer if it has been disabled.

1. Open the HP Printer Assistant.

2. Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

3. Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer name.
4. Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the printer name.

5. Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the printer name.

6. Go to the Scan section.

7. Select Manage Scan to Computer.
8. Click Enable.

Scan to a USB flash drive

Use the printer control panel to scan a file directly to a USB flash drive.

1. Place the document on the scanner glass or into the document feeder according to the indicators on the printer.
2. Insert the USB flash drive into the USB port on the front of the printer.
   A Reading... message displays on the printer control panel.
3. On the Memory Device Options screen, touch Scan To.
4. Select a file type from the Save As list.
5. Touch and then use the keypad to assign a name to the scanned file. Touch Save
6. If you want to preview the scan or change the scan options, do the following:

- To preview the scan, touch the Preview icon 🔒 or Touch to Preview (the scan preview option varies depending on the printer model).

- For additional scan options, touch the Settings icon .

7. Touch Save

Scan to email

Use the printer control panel to scan a file directly to an email address or contact list. The scanned file is sent to the address as an email message attachment.

In order to use this feature, the printer must be connected to a network and the Scan to Email feature must be configured by using the Scan to Email Setup Wizard (Windows) or the HP Embedded Web Server.

1. Load the document on the scanner glass or into the document feeder according to the indicators on the printer.
2. From the Home screen on the printer control panel, touch the Scan icon, and then touch E-mail.
3. If prompted, enter your login information in the Sign In screen.

This will set the From (or sender) address to the email address associated with your login.

1. Enter the email recipient or recipients:

2. Touch Enter email address to enter an email address using the keypad. Touch Done.

3. Touch the Address Book icon ^123 to select an individual or group contact in an address book.

4. Select the Address Book you want to use from the list, and enter the password if required.

5. Select the individual or group contacts you want to send to.

6. Touch Continue.

7. Touch Subject to add a subject line.

8. If you want to preview the scan or change the scan options, do the following:

- To preview the scan, touch the Preview icon 🔒 or Touch to Preview (the scan preview option varies depending on the printer model).

- For additional scan options, touch the Settings icon .

7. Touch Send or Start Scan

Scan to a network folder

Use the printer control panel to scan a document and save it to a folder on the network.

In order to use this feature, the printer must be connected to a network and the Scan to Network Folder feature must be configured by using the Scan to Network Folder Setup Wizard (Windows) or the HP Embedded Web Server.

1. Load the document on the scanner glass or into the document feeder according to the indicators on the printer.
2. From the Home screen on the printer control panel, touch the Scan icon, and then touch the Network Folder icon.
3. In the list of network folders, select the folder to which you want to save the document.

4. If prompted, enter the PIN.

5. Select a file type from the Save As list.

6. Touch and use the keypad to assign a name to the scanned file. Touch Done.

7. If you want to preview the scan or change the scan options, do the following:

- To preview the scan, touch the Preview icon 🔒 or Touch to Preview (the scan preview option varies depending on the printer model).

- For additional scan options, touch the Settings icon.

1. Touch Send or Start Scan

Scan to SharePoint

Use the printer control panel to scan a document directly to a SharePoint site.

NOTE: Scan to SharePoint is not supported with SharePoint 365.

1. Load the document on the scanner glass or into the document feeder according to the indicators on the printer.
2. Touch the Scan icon, the SharePoint icon, and then select the SharePoint folder.
3. If prompted, enter the PIN.
4. Select a file type from the Save As list.
5. Touch and use the keypad to assign a name to the scanned file. Touch Done.
6. If you want to preview the scan or change the scan options, do the following:

- To preview the scan, touch the Preview icon 🔒 or Touch to Preview (the scan preview option varies depending on the printer model).

- For additional scan options, touch the Settings icon.

1. Touch Send or Start Scan

Scan to a computer (Windows)

Use this feature to scan directly to a computer from the printer control panel.

This feature is available for Windows only.

Before scanning to a computer, make sure you have already installed the HP recommended printer software. The printer and computer must be connected and turned on. The printer software must be running before you scan.

1. Load the document on the scanner glass or into the document feeder according to the indicators on the printer.
2. From the Home screen on the control panel, touch the Scan icon.
3. Swipe right and then touch the Computer icon.
4. Select the computer you want to scan to.
5. Verify the Scan Shortcut is the option you want to use, or touch Scan Shortcut to select a different scan option.

6. If you are using the automatic document feeder (ADF) and your original is single-sided, touch the left side of the Original 2-sided slider to move it to the off position.

7. To select any additional scan options, touch the Settings icon.

8. Touch Send or Start Scan

Additional scan tasks

Locate information on the Web for performing common scan tasks.

Go to www.hp.com/support/colorljM479MFP.

Instructions are available for scan tasks, such as the following:

• How to scan a general photo or document
• How to scan as editable text (OCR)
- How to scan multiple pages into a single file

7 Fax

Configure the fax features, and send and receive faxes using the printer.

• Connect and configure the printer for fax
  Send a fax
  • Create, edit, and delete phone book entries
  • Reprint a received fax from the printer memory
  • Additional fax tasks

For more information:

HP's all-inclusive help for the printer includes the following information:

• Install and configure
- Learn and use
- Solve problems
- Download software and firmware updates
- Join support forums
• Find warranty and regulatory information

Connect and configure the printer for fax

Before using the printer to fax, connect the printer to a telephone line and configure the fax settings.

• Connect the printer to a telephone line
• Configure the printer for fax

Connect the printer to a telephone line

This printer is an analog fax device. HP recommends using the printer on a dedicated analog telephone line.

Connect the telephone cable to the fax port on the printer and to the telephone jack on the wall.

NOTE: On some printers, the fax port might be above the phone port. Refer to the icons on the printer.
NOTE: Some countries/regions might require an adapter for the telephone cable that came with the printer.

Diagram of a cable inserted into an electrical outlet with a blue arrow pointing to the cable (no text or symbols present)

Configure the printer for fax

Use this information to configure the fax settings after the printer is connected to a phone line.

• Configure the fax time, date and header using the HP Fax Setup Wizard
• Configure the time, date, and header using the printer control panel
• Configure the time, date, and header using the HP Embedded Web Server and Printer Home Page (EWS)
• Configure for stand-alone fax
• Configure for an answering machine
  • Install the HP Fax software in Windows (optional)

To begin, use one of the following methods:

• Configure the fax time, date and header using the HP Fax Setup Wizard on page 91 (recommended method)
• Configure the time, date, and header using the printer control panel on page 91
• Configure the time, date, and header using the HP Embedded Web Server and Printer Home Page (EWS) on page 92 (if the software is installed)

NOTE: In the United States and many other countries/regions, setting the time, date, and other fax header information is a legal requirement.

Configure the fax time, date and header using the HP Fax Setup Wizard

Configure the fax settings using the HP Fax Setup Wizard in Windows.

Access the Fax Setup Wizard after initial setup and software installation by following these steps.

NOTE: Some operating systems do not support the Fax Setup Wizard.

1. Open the HP Printer Assistant.

2. Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

3. Windows 8.1: Click the down arrow in the lower left corner of the Start screen, and then select the printer name.
4. Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the printer name.

5. Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the printer name.

6. In the HP Printer Assistant, select Fax, and then select Fax Setup Wizard.

7. Follow the on-screen instructions in the HP Fax Setup Wizard to configure the fax settings.

Configure the time, date, and header using the printer control panel

Change the fax settings using the printer control panel (after first-time setup using the Fax Setup Wizard).

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Touch Preferences, and then touch Date and Time.

3. Touch Set the Date, swipe each column to set the month, day, and year, and then touch Done.

4. Touch Set the Time, swipe each column to set the hour, minute, and AM/PM setting, and then touch Done.

5. Touch the Back button ↩ to return to the Setup menu, and then scroll to and touch Fax Setup.

6. Touch Preferences, and then scroll to and touch Fax Header.

7. Enter your personal or company name using the touch keypad, and then touch Done.

NOTE: The maximum number of characters for the fax header is 25.

1. Enter your fax number using the touch keypad, and then touch Done.

NOTE: The maximum number of characters for the fax number is 20.

Configure the time, date, and header using the HP Embedded Web Server and Printer Home Page (EWS)

Configure the fax settings using the HP Embedded Web Server (EWS).

1. Access the EWS using one of the following methods:

Access the EWS from the software:

a. Open the HP Printer Assistant:

• Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.
• Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer name.
• Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the printer name.
• Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the printer name.

b. In the HP Printer Assistant, select Print, and then select Printer Home Page (EWS). The EWS opens.

Access the EWS from a web browser:

a. Locate the printer's IP address: From the Home screen on the printer control panel, touch the Wireless icon or the Ethernet icon to view the printer's IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XXXXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

1. On the EWS Home page, click the Fax tab.
2. Follow the on-screen instructions to configure the fax settings.

Configure for stand-alone fax

Configure the printer to use as a stand-alone fax machine without connecting it to a computer or a network.

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
2. Swipe right and touch the Setup icon, and then touch Setup Wizard.
3. Follow the on-screen instructions to configure the fax settings.

Configure for an answering machine

Follow these steps to set up the printer on a shared voice/fax line with an answering machine.

1. Disconnect any devices that are connected to the telephone jack.
2. Remove the plug from the telephone line out port on the rear of the printer.
3. Connect the telephone cable to the fax port on the printer and to the telephone jack on the wall. Some countries/regions might require an adapter for the telephone cable that came with the printer.

NOTE: On some printers, the fax port might be above the phone port. Refer to the icons on the printer.

Illustration of a cable inserted into an electrical outlet with icons (no text or symbols)

1. Connect the answering machine telephone cable to the telephone line out port on the rear of the printer.

If you do not connect the answering machine directly to the printer, the answering machine might record fax tones from a sending fax machine and the printer might not receive faxes. If the answering machine does not have a built-in telephone, connect a telephone to the OUT port on the answering machine for convenience.

Diagram showing two blue arrows pointing to a wall-mounted device component with a shirt icon (no text or symbols)

1. Configure the Rings to Answer setting on the printer:

a. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon 🌐
b. Scroll to and touch Fax Setup, and then touch Preferences.
c. Scroll to and touch Rings to Answer, select the number of rings, and then touch Done to return to the Preferences menu.

1. Configure the printer to answer fax calls automatically:

▲ From the Preferences menu, touch Auto Answer to turn on the setting.

Install the HP Fax software in Windows (optional)

With the HP Fax software, you can fax electronic documents from a computer using the printer.

To use the HP Fax software, the following conditions are required:

The printer is connected directly to the computer or to a network to which the computer is connected
• The printer software is installed on the computer
• The computer operating system is supported by the printer

NOTE: The HP Fax software that came with the printer is the only computer fax program that can be used with the printer. The printer is not compatible with fax software produced by other manufacturers.

Download from the Web: Go to www.hp.com/support, click Software and Drivers, and then follow the onscreen instructions to download the latest HP software.

When prompted by the software installer, make sure you select HP Fax Software as one of the software components to install.

Send a fax

Send a fax from the printer or a third-party software program. Learn how to use speed dials and group-dial entries.

• Send a fax by dialing manually from the printer control panel
  • Fax from the flatbed scanner
  • Fax from the document feeder
  • Schedule a fax to be sent later
  • Use phone book entries
• Send a fax from the software (Windows)
• Send a fax from a third-party software program, such as Microsoft Word

Send a fax by dialing manually from the printer control panel

Send a fax manually using the printer control panel.

1. Load the document:

2. If you are loading an original on the scanner glass, place it face-down on the left rear corner of the glass.

3. If you are loading multiple pages in the document feeder, load the pages face-up and adjust the paper guides so they are snug against the paper.

If documents are in the document feeder and on the scanner glass at the same time, the printer processes the document in the document feeder and not the one on the scanner glass.

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
2. Touch Send Now.
3. Enter the fax number using the touch keypad.

To use access codes, credit cards, or calling cards, you must dial the fax number manually to allow for pauses and dialing codes. To send a fax to an international destination, dial manually to allow for pauses and international dialing codes. You cannot use speed dials with access codes, credit cards, calling cards, or to dial international destinations.

1. Touch Send to send the fax.

If you are faxing from the scanner glass and your document includes multiple pages, follow the control panel prompts to confirm and load additional pages.

Fax from the flatbed scanner

Fax a document using the scanner glass.

1. Place the document face-down on the scanner glass.

Illustration of a HP printer with an open lid and a blue arrow indicating the paper's front cover (no text or symbols present)

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
2. Touch Send Now.
3. Enter the fax number using the touch keypad, and then touch Send.

Fax from the document feeder

Fax a document using the document feeder.

1. Insert the originals into the document feeder face-up.

CAUTION: To prevent damage to the printer, do not use an original that contains correction tape, correction fluid, paper clips, or staples. Also, do not load photographs, small originals, or fragile originals into the document feeder.

Illustration of a printer with paper being inserted, showing paper number 123 and a blue arrow indicating the paper's direction (no text or symbols on the diagram itself)

1. Adjust the paper guides until they are snug against the paper.

Illustration of a printer with paper being inserted, showing page number 123 and blue arrows indicating orientation (no text or symbols on the diagram itself)

1. From the Home screen on the printer control panel, touch the Fax icon.
2. Touch Send Now.
3. Enter the fax number using the touch keypad, and then touch Send.

The printer sends the fax.

Schedule a fax to be sent later

Use the printer control panel to schedule a fax to be automatically sent at a future time within the next 24 hours. When using this option, the printer scans the document into memory and then returns to a Ready state to fax the document at the specified time.

1. Load the document:

2. If you are loading an original on the scanner glass, place it face-down on the left rear corner of the glass.

3. If you are loading multiple pages in the document feeder, load the pages face-up and adjust the paper guides so they are snug against the paper.

If documents are in the document feeder and on the scanner glass at the same time, the printer processes the document in the document feeder and not the one on the scanner glass.

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
2. Touch Send Later.
3. Swipe the columns on the screen to set the hour and minute to the specific time you want to send the fax.
4. Enter the fax number using the touch keypad, and then touch Send.

The printer will scan the document and save it in the printer's memory until the scheduled time, and then it will automatically send the fax at that time.

Use phone book entries

Send a fax to an individual or a group that has already been added to the phone book.

NOTE: Before you can send a fax using phone book entries, you must first add contacts to the phone book.

1. Load the document onto the scanner glass or into the document feeder.

Illustration of a printer with a paper feeding into a slot, showing a blue arrow pointing to the page (no text or symbols present)

1. From the Home screen on the printer control panel, touch the Fax icon.
2. Touch Send Now.
3. Touch the Phone Book icon .
4. Touch the local phone book, touch the name of the individual or group entry that you want to use, and then touch Select.
5. Touch Send to send the fax.

Send a fax from the software (Windows)

Fax a document using the HP Fax software in Windows.

The procedure to send a fax varies according to your specifications. The most typical steps follow.

1. Open the HP Printer Assistant.

2. Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

3. Windows 8.1: Click the down arrow in the lower left corner of the Start screen, and then select the printer name.
4. Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the printer name.

5. Windows 7: From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the printer name.

6. In the HP Printer Assistant, select Fax, and then select Send Fax.

The fax software opens.

1. Enter the fax number of one or more recipients.
2. Place the document on the scanner glass or load it in the document feeder.
3. Click Add Scan.
4. Click Send Now.

Send a fax from a third-party software program, such as Microsoft Word

If you created a document using a third-party software program, such as Microsoft Word, you can fax the document directly from the software.

1. Open a document in a third-party program.
2. Click the File menu, and then click Print.
3. Select the fax print driver from the print driver drop-down list.
   The fax software opens.
4. Enter the fax number of one or more recipients.
5. Include any pages loaded at the printer. This step is optional.
6. Click Send Now.

Create, edit, and delete phone book entries

You can store frequently dialed fax numbers in the phone book as individual entries, or a group of entries.

• Create and edit individual phone-book entries
• Create and edit group phone-book entries
- Delete phone book entries

Create and edit individual phone-book entries

Add new individual entries to the phone book, or edit existing entries.

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
2. Swipe right and then touch the Phone Book icon.
3. Touch Local Phone Book, and then proceed with one of the following options:

- Add a new contact: Touch the Add Contact icon

- Edit an existing contact: Touch the name of the contact in the list.

1. Touch Name, enter (or edit) the name of the contact using the touch keypad, and then touch Done.
2. Touch Fax Number, enter (or edit) the fax number using the touch keypad, and then touch Done.
3. Touch Add to save a new contact, or touch Done to save the changes you made to an existing contact.

Create and edit group phone-book entries

Create or edit group entries in the address book.

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
2. Swipe right and then touch the Phone Book icon.
3. Touch Local Phone Book.
4. Touch the Phone Book icon, and then touch the Group icon.

To edit an existing group, touch the name of the group and then make the changes in the Edit Group menu.

1. Touch Add New Group .

1. Touch Name, enter a name for the group using the touch keypad, and then touch Done.
2. Touch Number of Members, touch the names of the contacts that you want to add to the group, and then touch Select.
3. Touch Create to save the new group.

Delete phone book entries

Delete entries from the phone book.

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
2. Swipe right and then touch the Phone Book icon.
3. Touch Local Phone Book, and then scroll to and touch the name of the contact or group that you want to delete.
4. On the Edit Contact or Edit Group screen, touch Delete, and then touch Yes to confirm that you want to delete the contact.

Reprint a received fax from the printer memory

Received faxes that are not printed are stored in the printer's memory. Reprint a received fax that is stored in the memory.

After the memory becomes full, the printer cannot receive a new fax until you print or delete the faxes from memory. You might also want to delete the faxes in memory for security or privacy purposes.

1. Make sure paper is loaded in the main paper tray.
2. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
3. Touch Reprint.
4. Scroll to and touch the name of the received fax that you want to print, and then touch Print.

Additional fax tasks

Locate information on the Web for performing common fax tasks.

Go to www.hp.com/support/colorljM479MFP.

Instructions are available for fax tasks, such as the following:

• Configure fax billing codes
• Use a fax printing schedule
• Block incoming faxes
  • Fax archiving and forwarding

- Create and manage fax speed dial lists

8 Manage the printer

Utilize management tools, security and energy-conservation settings, and firmware updates for the printer.

• Use HP Web Services applications
• Change the printer connection type (Windows)
• Advanced configuration with HP Embedded Web Server and Printer Home Page (EWS)
- Configure IP network settings
• Printer security features
• Energy-conservation settings
HP Web Jetadmin
Update the firmware

For more information:

HP's all-inclusive help for the printer includes the following information:

• Install and configure
- Learn and use
- Solve problems
- Download software and firmware updates
- Join support forums
• Find warranty and regulatory information

Use HP Web Services applications

With Web Services, you can add print apps to your printer using HP Connected. Print apps is a content-on-demand delivery platform that allows you to browse and view popular web destinations and print in an easy-to-read format.

1. From the Home screen on the printer control panel, swipe right and then touch Apps.
2. Touch the print app that you want to use.

For more information about individual print apps and to create an account, visit HP Connected. With an HP Connected account, you can add, configure, or remove print apps, and set the order in which the apps appear on your printer control panel.

NOTE: The HP Connected website might not be available in all countries/regions.

You can also turn off print apps using the EWS. To do so, open the EWS (see Open the Embedded Web Server), click the Settings tab, click Security and then click Administrator Settings. Disable the Only Print Apps option.

Change the printer connection type (Windows)

If you are already using the printer and you wish to change the way it is connected, use Device Setup & Software to change the connection. For example, connect the new printer to the computer using a USB or network connection, or change the connection from a USB to a wireless connection.

To open Device Setup & Software, complete the following procedure:

1. Open the HP Printer Assistant.

2. Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

3. Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer name.
4. Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the printer name.

5. Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the printer name.

6. In the HP Printer Assistant, select Tools from the navigation bar, and then select Device Setup & Software.

Advanced configuration with HP Embedded Web Server and Printer Home Page (EWS)

Use the HP Embedded Web Server to manage printing functions from your computer instead of the printer control panel.

• Method one: Open the HP Embedded Web Server (EWS) from the software
• Method two: Open the HP Embedded Web Server (EWS) from a web browser

• View printer status information

• Determine the remaining life for all supplies and order new ones

• View and change tray configurations (paper types and sizes)

• View and print internal pages

• View and change network configuration

The HP Embedded Web Server works when the printer is connected to an IP-based network. The HP Embedded Web Server does not support IPX-based printer connections. You do not have to have Internet access to open and use the HP Embedded Web Server.

When the printer is connected to the network, the HP Embedded Web Server is automatically available.

NOTE: Printer Home Page (EWS) is software used to connect to the HP Embedded Web Server when the printer is connected to a computer via USB. It is available only if a full installation was performed when the printer was installed on a computer. Depending on how the printer is connected, some features might not be available.

NOTE: The HP Embedded Web Server is not accessible beyond the network firewall.

Method one: Open the HP Embedded Web Server (EWS) from the software

Use this method to open the EWS from the HP Printer Assistant software.

1. Open the HP Printer Assistant.

2. Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name.

3. Windows 8.1: Click the down arrow in lower left corner of the Start screen, and then select the printer name.
4. Windows 8: Right-click an empty area on the Start screen, click All Apps on the app bar, and then select the printer name.

5. Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start, select All Programs, click HP, click the folder for the printer, and then select the printer name.

6. In the HP Printer Assistant, select Print, and then select Printer Home Page (EWS).

Method two: Open the HP Embedded Web Server (EWS) from a web browser

Use the EWS to manage your printer from a computer instead of the printer control panel.

Your printer must be connected to an IP-based network before you can access the EWS.

1. From the Home screen on the printer control panel, touch the Wireless icon (p) or the Ethernet icon □ to view the printer's IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XXXXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

Table 8-1 HP Embedded Web Server tabs

Tab or section Description
Home tabProvides printer, status, and configuration information.	Scan to Email: Scan documents and send them as email attachments.HP Digital Fax: Configure the printer to save faxes to a network folder or to forward faxes to an email address.Sleep Mode: Configure the Sleep Mode settings.Web Services: Set up and manage Web Services such as HP ePrint and Print Apps.Printer Update: Check for new printer updates.Estimated Cartridge Levels: View the status of the cartridges and the estimated cartridge levels.Network Summary: View a summary of the printer's network settings.Print Quality Toolbox: Use maintenance tools to improve the print quality of your printouts.Wireless Setup Wizard: Connect the printer to a wireless network.Wi-Fi Direct: View and edit Wi-Fi Direct settings.AirPrint: View and edit AirPrint settings.Printer Information: View general information about the printer.Administrator: Set up and manage advanced security and usage controls for the printer.Shutdown Mode: Configure Shutdown Mode settings.Usage Report: View detailed information about printer usage.Fax Log: View the printer's fax log.Fax Setup Wizard: Set up the fax.Firewall: Set up and manage the printer's firewall.Printer Reports: View the reports available for the printer.Webscan: Scan documents from the web browser.Backup: Back up the printer settings into a password-encrypted file.Personalize: Add or remove features that display on the Home tab.
Scan tab(MFP models only)	•Scan to Computer•Scan to Email•Scan to Network Folder•Scan to Sharepoint•Scan to USB•Address Book
Copy/Print tab	•Copy
Provides the ability to change default copy and print settings from your computer.	•Print
Fax tab(Fax models only)	•Settings•Information•HP Digital Fax
Web Services tab •Web Services Settings
Network tab(Network- connected printers only)	•General•Wired (802.3)
Provides the ability to change network settings from your computer.	•Wireless (802.11)•Wi-Fi Direct•Bluetooth Smart•AirPrint•Google Cloud Print•Internet Printing Protocol•Security•Advanced Settings
Tools tab •Product Information
	•Reports
	•Utilities
	•Backup and Restore
	•Printer Restart
	•Printer Updates
Settings tab •Power Management
	•Preferences
	•Supplies
	•Control Panel Customization
	•Security
	•Email Alerts
	•Restore Defaults
	•Firewall

Configure IP network settings

Review the following information about configuring IP network settings.

Introduction
• Printer sharing disclaimer
• View or change network settings
- Rename the printer on a network
• Manually configure IPv4 TCP/IP parameters from the control panel
• Link speed and duplex settings

Introduction

Use the information in the following sections to configure the printer network settings.

Printer sharing disclaimer

HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and not of the HP printer drivers.

Go to Microsoft at www.microsoft.com.

View or change network settings

Use the HP Embedded Web Server to view or change IP configuration settings.

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel, touch the Wireless icon (P) or the Ethernet icon to view the printer's IP address or host name.
b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XXXXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

1. On the EWS Home page, click the Network tab to view network information. Change settings as needed.

Rename the printer on a network

Use the HP Embedded Web Server (EWS) to rename the printer on a network so it can be uniquely identified.

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel, touch the Wireless icon (P) or the Ethernet icon to view the printer's IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

1. On the EWS Home page, click the Network tab.
2. In the left navigation pane, click General to expand the options, and then click Network Identification.
3. In the Host Name text field, enter a name to uniquely identify this printer, and then click Apply to save the changes.

Manually configure IPv4 TCP/IP parameters from the control panel

Use the control-panel menus to manually set the IPv4 address, subnet mask, and default gateway.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Touch Network Setup, and then scroll to and touch one of the following menus:

3. Ethernet Settings (for a wired network)
   ● Wireless Settings (for a wireless network)

4. Touch IP Settings.

5. Touch Manual, and then touch IP Address.

6. Touch each of the following menu items and then use the touch keypad to enter the information:

7. IP Address

8. Subnet Mask

9. Default Gateway

10. Touch Apply to save the settings.

Link speed and duplex settings

The link speed and communication mode of the print server must match the network hub. For most situations, leave the printer in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the printer from communicating with other network devices. If you need to make changes, use the printer control panel.

NOTE: This information applies only to Ethernet (wired) networks. It does not apply to wireless networks.
NOTE: The printer setting must match the setting for the network device (a network hub, switch, gateway, router, or computer).
NOTE: Making changes to these settings causes the printer to turn off and then on. Make changes only when the printer is idle.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon Setup icon
2. Touch Network Setup.
3. Touch Ethernet Settings, and then touch Link Speed.
4. Select one of the following options:

Setting Description
Automatic	The print server automatically configures itself for the highest link speed and communication mode allowed on the network.
10T Full 10 Mbps, full-duplex operation
10T Half 10 Mbps, half-duplex operation
100TX Full 100 Mbps, full-duplex operation
100TX Half 100 Mbps, half-duplex operation
1000T Full 1000 Mbps, full-duplex operation

After making a change to the setting, the printer turns off and then on.

Printer security features

Review the following information about the printer security features.

Introduction
- Assign or change the system password using the Embedded Web Server

Introduction

The printer includes several security features to restrict who has access to configuration settings, to secure data, and to prevent access to valuable hardware components.

Assign or change the system password using the Embedded Web Server

Assign an administrator password for access to the printer and the HP Embedded Web Server so that unauthorized users cannot change the printer settings.

1. Open the HP Embedded Web Server (EWS):

a. From the Home screen on the printer control panel, touch the Wireless icon (☐) or the Ethernet icon ☐ to view the printer's IP address or host name.
b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XXXXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

1. On the EWS Home page, click the Settings tab.
2. In the left navigation pane, click Security to expand the options, and then click General Security.
3. Enter a password.
4. Re-enter the password in the Confirm Password field, and then click Apply.

Make note of the password and store it in a safe place.

Energy-conservation settings

Learn about the energy-conservation settings that are available on your printer.

Introduction
• Print with EconoMode
- Set the Sleep Mode setting
• Set the Shutdown Mode setting
• Set the Disable Shutdown setting

Introduction

The printer includes several economy features to conserve energy and supplies.

Print with EconoMode

This printer has an EconoMode option for printing drafts of documents. Using EconoMode can use less toner. However, using EconoMode can also reduce print quality.

HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply might outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer acceptable, consider replacing the toner cartridge.

NOTE: If this option is not available in your print driver, you can set it using the HP Embedded Web Server.

1. From the software program, select the Print option.
2. Select the printer, and then click the Properties or Preferences button.
3. Click the Paper/Quality tab.
4. Click the EconoMode check box.

Set the Sleep Mode setting

Use the control panel menus to specify the amount of time the printer must be inactive before it goes into sleep mode.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Scroll to and open the following menus:

3. Power Management

4. Sleep Mode

5. Touch an option to specify the amount of time the printer must be inactive before it goes into sleep mode.

Set the Shutdown Mode setting

Use the control panel menus to specify the amount of time the printer must be inactive before it shuts down.

NOTE: After the printer shuts down, the power consumption is 1 watt or less.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
2. Scroll to and open the following menus:
3. Power Management
4. Shutdown Mode
5. Touch an option to specify the amount of time the printer must be inactive before it shuts down.

Set the Disable Shutdown setting

Use the control panel menus to disable the printer from shutting down after a period of inactivity.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Scroll to and open the following menus:

3. Power Management

4. Disable Shutdown

5. Touch one of the following options:

6. When ports are active: The printer will not shut down unless all ports are inactive. An active network link or fax connection will prevent the printer from shutting down.

7. Do not disable: The printer will shut down after a period of inactivity as determined by the Shutdown Mode setting.

NOTE: The default setting is When ports are active.

HP Web Jetadmin

HP Web Jetadmin is an award-winning, industry-leading tool for efficiently managing a wide variety of networked HP products, including printers, multifunction printers, and digital senders. This single solution allows you to remotely install, monitor, maintain, troubleshoot, and secure your printing and imaging environment — ultimately increasing business productivity by helping you save time, control costs, and protect your investment.

HP Web Jetadmin upgrades are periodically made available to provide support for specific printer features. Go to www.hp.com/go/webjetadmin for more information.

Update the firmware

HP offers periodic printer updates, new Web Services apps, and new features to existing Web Services apps. Follow these steps to update the printer firmware for a single printer. When you update the firmware, Web Service apps will update automatically.

• Method one: Update the firmware using the control panel
• Method two: Update the firmware using the HP Printer Update utility

There are two supported methods to perform a firmware update on this printer. Use only one of the following methods to update the printer firmware.

Method one: Update the firmware using the control panel

Follow these steps to update the firmware using the printer control panel (for network-connected printers only), and/or set the printer to install future firmware updates automatically. For USB-connected printers, skip to Method two.

1. Make sure the printer is connected to a wired (Ethernet) or wireless network with an active Internet connection.

NOTE: The printer must be connected to the internet to update the firmware via a network connection.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
2. Scroll to and touch Printer Maintenance, and then touch Update the Printer.

If the Update the Printer option is not listed, use Method two.

1. Touch Check for Printer Updates Now to check for updates.

NOTE: The printer automatically checks for an update, and if a newer version is detected, the update process starts automatically.

1. Set the printer to automatically update the firmware when updates become available:

a. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon 🌐
b. Scroll to and touch Printer Maintenance, and then touch Update the Printer.
c. Touch Manage Updates, touch Allow Updates, and then touch Yes.
d. Touch the Back button ↩, touch Printer Update Options, and then touch Install Automatically (Recommended).

Method two: Update the firmware using the HP Printer Update utility

Follow these steps to manually download and install the HP Printer Update utility.

NOTE: This method is the only firmware update option available for printers connected to the computer via a USB cable. This method also works for printers that are connected to a network.

NOTE: You must have a print driver installed in order to use this method.

1. Go to www.hp.com/go/support, click Software and Drivers, and then click Printer.
2. In the text field, type the printer name, click Submit, and then click your printer model from the list of search results.
3. In the Firmware section, locate the Firmware Update file.
4. Click Download, and then click Run.
5. When the HP Printer Update utility launches, select the printer that you wish to update, and then click Update.
6. Follow the on-screen instructions to complete the installation, and then click the OK button to close the utility.

9 Solve problems

Troubleshoot problems with the printer. Locate additional resources for help and technical support.

• Customer support
  • Control panel help system
• Restore the factory-set defaults
  A "Cartridge is low" or "Cartridge is very low" message displays on the printer control panel
  • Printer does not pick up paper or misfeeds
  Clear paper jams
  • Resolving print quality problems
• Improve copy and scan image quality
• Improve fax image quality
• Solve wired network problems
• Solve wireless network problems
• Solve fax problems

For more information:

HP's all-inclusive help for the printer includes the following information:

• Install and configure
- Learn and use
- Solve problems
- Download software and firmware updates
- Join support forums
• Find warranty and regulatory information

Customer support

Find support contact options for your HP printer.

Table 9-1 HP support options

Support option Contact information
Get telephone support for your country/regionHave the printer name, serial number, date of purchase, and problem description ready	Country/region phone numbers are on the flyer that was in the box with the printer or atwww.hp.com/support.
Get 24-hour Internet support, and download software utilities and drivers	www.hp.com/support/colorljM479MFP
Order additional HP service or maintenance agreements www.hp.com/go/carepack
Register the printer www.register.hp.com

Control panel help system

The printer has a built-in Help system that explains how to use each screen.

To open the Help system, touch the Help icon? In the lower-right corner of the screen.

Tips for using the online Help:

For some screens, the Help opens to a global menu where you can search for specific topics. You can browse through the menu structure by touching the buttons in the menu.
Some Help screens include animations that guide you through procedures, such as clearing jams.
- For screens that contain settings for individual jobs, the Help opens to a topic that explains the options for that screen.
If the printer alerts you of an error or warning, touch the Help icon ? to open a message that describes the problem. The message also contains instructions to help solve the problem.

Restore the factory-set defaults

Restoring the factory-set defaults returns all of the printer and network settings to the factory defaults. It will not reset the page count, or tray size.

To restore the printer to the factory-default settings, follow these steps.

CAUTION: Restoring the factory-set defaults returns all of the settings to the factory defaults, and it also deletes any pages that are stored in the memory.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Scroll to and open the following menus:

3. Printer Maintenance

4. Restore
5. Restore Factory Defaults

The printer automatically restarts.

A “Cartridge is low” or “Cartridge is very low” message displays on the printer control panel

Understand the cartridge-related messages on the control panel and what actions to take.

• Change the "Very Low" settings
  Order supplies

Cartridge is low: The printer indicates when a toner cartridge level is low. Actual toner cartridge life remaining may vary. Consider having a replacement available to install when print quality is no longer acceptable. The toner cartridge does not need to be replaced now.

Continue printing with the current cartridge until redistributing the toner no longer yields acceptable print quality. To redistribute the toner, remove the toner cartridge from the printer and gently rock the cartridge back and forth about its horizontal axis. For graphical representation, see cartridge replacement instructions. Reinsert the toner cartridge into the printer and close the cover.

Cartridge is very low: The printer indicates when the toner cartridge level is very low. Actual toner cartridge life remaining may vary. Consider having a replacement available to install when print quality is no longer acceptable. The toner cartridge does not need to be replaced now unless the print quality is no longer acceptable.

HP's Premium Protection Warranty expires when a message indicating that HP's Premium Protection Warranty on this supply has ended appears on the Supplies Status Page or the EWS.

Change the "Very Low" settings

You can change the way the printer reacts when supplies reach the Very Low state. You do not have to re-establish these settings when you install a new toner cartridge.

• Change the "Very Low" settings from the control panel
  • For printers with fax capability

Change the "Very Low" settings from the control panel

Determine how the printer will notify you about very low cartridge levels.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Scroll to and open the following menus:

3. Supply Settings

4. Black Cartridge or Color Cartridge

5. Very Low Setting

6. Select one of the following options:

7. Select the Stop option to set the printer to stop printing until you replace the toner cartridge.

8. Select the Prompt option to set the printer to stop printing and prompt you to replace the toner cartridge. You can acknowledge the prompt and continue printing.
9. Select the Continue option to set the printer to alert you that the toner cartridge is very low, but to continue printing.
10. (For Color Cartridges) Select the Print Black option to set the printer to alert you that the toner cartridge is very low, but to continue printing using black only.

NOTE: The Low Threshold option allows you to define the level of ink that is considered very low.

For printers with fax capability

When the printer is set to the Stop or Prompt option, there is some risk that faxes will not print when the printer resumes printing. This can occur if the printer has received more faxes than the memory can hold while the printer is waiting.

The printer can print faxes without interruption when it passes the Very Low threshold if you select the Continue option for the toner cartridge, but print quality might degrade.

Order supplies

Order supplies and paper for your HP printer.

Table 9-2 Options for ordering supplies

Ordering options Contact information
Order supplies and paper www.hp.com/go/suresupply
Order through service or support providers Contact an HP-authorized service or support provider.
Order using the HP Embedded Web Server (EWS) To access, in a supported web browser on your computer, enter the printer IP address or host name in the address/URL field. The EWS contains a link to the HP SureSupply website, which provides options for purchasing Original HP supplies.

Printer does not pick up paper or misfeeds

Review the following information about the printer not picking up paper or misfeeding paper.

Introduction
• The printer picks up multiple sheets of paper
• The printer does not pick up paper
The document feeder jams, skews, or picks up multiple sheets of paper

Introduction

The following solutions can help solve problems if the printer is not picking up paper from the tray or is picking up multiple sheets of paper at one time. Either of these situations can result in paper jams.

The printer picks up multiple sheets of paper

If the printer picks up multiple sheets of paper from the tray, try these solutions.

1. Remove the stack of paper from the tray and flex it, rotate it 180 degrees, and flip it over. Do not fan the paper. Return the stack of paper to the tray.

NOTE: Fanning the paper introduces static electricity. Instead of fanning the paper, flex the stack by holding it at each end and bringing the ends up to form a U shape. Then, rotate the ends down to reverse the U shape. Next, hold each side of the stack of paper, and repeat this process. This process releases individual sheets without introducing static electricity. Straighten the paper stack against a table before returning it to the tray.

Figure 9-1 Technique for flexing the paper stack

1

Illustration of two hands holding a folded or layered object (no text or symbols)

2

Illustration of two hands holding a flexible, striped fabric or material (no text or symbols)

1. Use only paper that meets HP specifications for this printer.
2. Verify that the humidity in the room is within specifications for this printer, and that paper is being stored in unopened packages. Most reams of paper are sold in moisture-proof wrapping to keep paper dry.

In high-humidity environments, paper at the top of the stack in the tray can absorb moisture, and it might have a wavy or uneven appearance. If this happens, remove the top 5 to 10 sheets of paper from the stack.

In low-humidity environments, excess static electricity can cause sheets of paper to stick together. If this happens, remove the paper from the tray, and flex the stack as described above.

1. Use paper that is not wrinkled, folded, or damaged. If necessary, use paper from a different package.
2. Make sure the tray is not overfilled by checking the stack-height markings inside the tray. If it is overfilled, remove the entire stack of paper from the tray, straighten the stack, and then return some of the paper to the tray.

The following images show examples of the stack-height markings in the trays for various printers. Most HP printers have markings similar to these. Also make sure that all sheets of paper are below the tabs near the stack-height marks. These tabs help hold the paper in the correct position as it enters the printer.

Figure 9-2 Stack height markings

Diagram illustrating the internal components of a vehicle air intake system, showing fan, dashboard, and exhaust parts with Chinese annotations.

Figure 9-3 Tab for the paper stack

Technical diagram of a mechanical component with an inset close-up view showing internal structure (no text or symbols)

1. Make sure the paper guides in the tray are adjusted correctly for the size of paper. Adjust the guides to the appropriate indentation in the tray.
2. Make sure the printing environment is within recommended specifications.

The printer does not pick up paper

If the printer does not pick up paper from the tray, try these solutions.

1. Open the printer and remove any jammed sheets of paper. Verify that no torn remnants of paper remain inside of the printer.
2. Load the tray with the correct size of paper for the job.
3. Make sure the paper size and type are set correctly on the printer control panel.
4. Make sure the paper guides in the tray are adjusted correctly for the size of paper. Adjust the guides to the appropriate indentation in the tray. The arrow on the tray guide should line up exactly with the marking on the tray.

NOTE: Do not adjust the paper guides tightly against the paper stack. Adjust them to the indentations or markings in the tray.

The following image shows examples of the paper-size indentations in the trays. Most HP printers have markings similar to these.

Figure 9-4 Examples of size markings

A5 JIS B5 EXEC AA LTR/LGL A4 11 10.5 B5 A4 A5 A6 BEC A4 DR/A4

1. Verify that the humidity in the room is within specifications for this printer, and that paper is being stored in unopened packages. Most reams of paper are sold in moisture-proof wrapping to keep paper dry.

In high-humidity environments, paper at the top of the stack in the tray can absorb moisture, and it might have a wavy or uneven appearance. If this happens, remove the top 5 to 10 sheets of paper from the stack.

In low-humidity environments, excess static electricity can cause sheets of paper to stick together. If this happens, remove the paper from the tray, and flex the stack by holding it at each end and bringing the ends up to form a U shape. Then, rotate the ends down to reverse the U shape. Next, hold each side of the stack of paper, and repeat this process. This process releases individual sheets without introducing static electricity. Straighten the paper stack against a table before returning it to the tray.

Figure 9-5 Technique for flexing the paper stack

Illustration of hands holding a curved object with layered texture (no text or symbols)

Illustration of two hands holding a curved object, possibly a rolled-up fabric or material (no text or symbols)

1. Check the printer control panel to see if it is displaying a prompt to feed the paper manually. Load paper, and continue.

2. The rollers above the tray might be contaminated. Clean the rollers with a lint-free cloth dampened with warm water. Use distilled water, if it is available.

CAUTION: Do not spray water directly on to the printer. Instead, spray water on the cloth or dab the cloth in water and wring it out before cleaning the rollers.

The following image shows examples of the roller location for various printers.

Figure 9-6 Roller locations for Tray 1 or the multipurpose tray

Technical line drawing of a mechanical assembly with a highlighted component (no text or symbols)

3D mechanical assembly diagram showing internal components and a highlighted cylindrical component (no text or symbols)

The document feeder jams, skews, or picks up multiple sheets of paper

Try the suggested fixes if the document feeder is jamming, skewing pages, or picking up multiple sheets of paper at a time.

NOTE: This information applies to MFP printers only.

The original might have something on it, such as staples or self-adhesive notes, that must be removed.
- Check that all rollers are in place and that the roller-access cover inside the document feeder is closed.
• Make sure that the top document-feeder cover is closed.
- The pages might not be placed correctly. Straighten the pages and adjust the paper guides to center the stack.
- The paper guides must be touching the sides of the paper stack to work correctly. Make sure that the paper stack is straight and the guides are against the paper stack.
The document feeder input tray or output bin might contain more than the maximum number of pages. Make sure the paper stack fits below the guides in the input tray, and remove pages from the output bin.
- Verify that there are no pieces of paper, staples, paper clips, or other debris in the paper path.
- Clean the document-feeder rollers and the separation pad. Use compressed air or a clean, lint-free cloth moistened with warm water. If misfeeds still occur, replace the rollers.

Clear paper jams

Review the following information about clearing paper jams.

Introduction
• Experiencing frequent or recurring paper jams?
Paper jam locations
• Clear paper jams in the document feeder
• Clear paper jams in Tray 1 - 13.02
• Clear paper jams in Tray 2 - 13.03
• Clear paper jams in the output bin - 13.10, 13.11, 13.12
• Clear paper jams in the duplexer (duplex models only) - 13.14, 13.15
• Clear paper jams in the toner cartridge or fuser area - 13.08, 13.09

Introduction

The following information includes instructions for clearing paper jams from the printer.

Experiencing frequent or recurring paper jams?

Follow the steps to solve problems with frequent paper jams. If the first step does not resolve the problem continue with the next step until you have resolved the problem.

1. If paper has jammed in the printer, clear the jam and then print a configuration page to test the printer.

2. Check that the tray is configured for the correct paper size and type on the printer control panel. Adjust paper settings if necessary.
   a. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
   b. Touch Paper setup.
   c. Select the tray from the list.
   d. Select Paper Type, and then select the type of paper that is in the tray.
   e. Select Paper Size, and then select the size of paper that is in the tray.

3. Turn the printer off, wait 30 seconds, and then turn it on again.

4. Print a cleaning page to remove excess toner from inside the printer:

a. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

b. Open the following menus:

1. Printer Maintenance
2. Print Quality Tools

3. Cleaning Page

4. Print a configuration page to test the printer:

a. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
b. Open the following menus:

1. Reports
2. Printer Configuration Report

If none of these steps resolves the problem, the printer might need service. Contact HP customer support.

Paper jam locations

Jams can occur in these locations.

Figure 9-7 Jam locations

Diagram of HP printer internal components with numbered labels pointing to different parts

Number Description

1 Document feeder
2 Output bin
3 Tray 1
4 Tray 2
5 Rear door and fuser area
6 Duplexer (duplex models only)

Clear paper jams in the document feeder

Use the following procedure to check for paper in all possible jam locations related to the document feeder.

When a jam occurs, the control panel displays an animation that assists in clearing the jam.

1. Open the document feeder cover.

Diagram of a printer's internal structure showing a blue arrow indicating the open lid area (no text or symbols present)

1. Remove any jammed paper.

Diagram of a vehicle interior showing airflow or ventilation system with blue arrows indicating direction (no text or symbols)

1. Close the document feeder cover.

Diagram of a printer internal structure with a blue arrow indicating a process or operation (no text or symbols present)

1. Lift the document feeder input tray to provide better access to the document feeder output bin, and then remove any jammed paper from the output area.

Line drawing of a HP printer with paper feed and paper clip (no text or symbols)

1. Open the scanner lid. If paper is jammed behind the white plastic backing, gently pull it out.

Line drawing of an HP printer with a paper airplane showing the open lid and two blue arrows indicating flow direction (no text or symbols present)

1. Lower the scanner lid.

Line drawing of a printer with an open lid and a blue arrow indicating compression or disassembly (no text or symbols)

NOTE: To avoid jams, make sure the guides in the document feeder input tray are adjusted tightly against the document. Remove all staples and paper clips from original documents.

NOTE: Original documents that are printed on heavy, glossy paper can jam more frequently than originals that are printed on plain paper.

Clear paper jams in Tray 1 - 13.02

Use the following procedure to clear paper jams in Tray 1.

When a jam occurs, the control panel displays an animation that assists in clearing the jam.

NOTE: If the sheet tears, remove all fragments before resuming printing.

1. If you can see the jammed sheet in Tray 1, remove the jammed sheet by pulling it straight out.

Diagram of a door handle with blue directional arrows indicating movement or force (no text or symbols)

1. If you cannot see the jammed sheet, close Tray 1, and then remove Tray 2.

Diagram of a printer or printer holder assembly with a blue arrow indicating the component (no text or symbols present)

1. At the left side of the Tray 2 cavity, press the tab to lower the tray plate, and then remove any paper. Remove the jammed sheet by gently pulling it straight out.

Diagram of a mechanical component with blue arrows indicating direction, no text or symbols present

1. Push the tray plate back up into place.

Diagram of a mechanical component with a blue upward arrow indicating motion or force (no text or symbols)

1. Reinstall Tray 2.

Technical line drawing of a mechanical device with an arrow indicating direction (no text or symbols present)

1. Reopen Tray 1 and load paper into the tray.

Technical line drawing of a mechanical component with an inset close-up showing a detail (no text or symbols)

Clear paper jams in Tray 2 - 13.03

Use the following procedure to check for a paper jam in Tray 2.

When a jam occurs, the control panel displays an animation that assists in clearing the jam.

1. Pull the tray completely out of the printer.

3D diagram of a printer or printer assembly with a blue arrow indicating a downward motion (no text or symbols present)

1. Remove any jammed or damaged sheets of paper.

Technical diagram showing a mechanical component with two blue arrows indicating downward motion (no text or symbols present)

1. Reinsert and close Tray 2.

Technical line drawing of a mechanical device with a blue arrow pointing to a component (no text or symbols present)

NOTE: When reinserting the paper, make sure the paper guides are adjusted properly for the paper size. For more information, see Load paper to Tray 2 on page 22.

Clear paper jams in the output bin - 13.10, 13.11, 13.12

Use the following procedure to check for paper in all possible jam locations related to the output bin.

When a jam occurs, the control panel displays an animation that assists in clearing the jam.

If paper is visible in the output bin, grasp the leading edge and remove it.

Line drawing of a HP printer with blue arrows indicating compression or disassembly process (no text or symbols)

Clear paper jams in the duplexer (duplex models only) - 13.14, 13.15

Use the following procedure to check for paper in all possible jam locations in the automatic duplexer.

When a jam occurs, the control panel displays an animation that assists in clearing the jam.

1. At the rear of the printer, open the duplexer.

Diagram of a computer motherboard showing a blue arrow pointing to the interior panel (no text or symbols present)

1. Remove any jammed or damaged sheets of paper.

CAUTION: The fuser is located above the rear door, and it is hot. Do not attempt to reach into the area above the rear door until the fuser is cool.

Diagram of an open computer chassis showing internal components and two blue arrows indicating movement or force (no text or symbols present)

1. Close the duplexer.

Diagram of a computer motherboard showing an open chassis with a blue arrow indicating the process (no text or symbols present)

Clear paper jams in the toner cartridge or fuser area - 13.08, 13.09

Use the following procedure to check for paper in all possible jam locations in the toner cartridge or fuser area.

When a jam occurs, the control panel displays an animation that assists in clearing the jam.

1. Open the rear door.

Diagram of a printer's internal structure with a blue arrow indicating the process (no text or symbols present)

1. Gently pull out any jammed paper from the rollers in the rear door area.

Diagram of a printer's internal structure showing internal components and a blue arrow indicating flow or movement (no text or symbols present)

1. Close the rear door.

Diagram of a printer's internal structure with a blue arrow indicating the process (no text or symbols present)

Resolving print quality problems

Review the following information about resolving print quality problems.

Introduction
- Troubleshoot print quality
- Troubleshoot image defects

Introduction

Use the information below to troubleshoot print-quality problems, including issues with image quality and color quality.

The troubleshooting steps can help resolve the following defects:

• Blank pages
• Black pages
• Colors that do not align
• Curled paper
  Dark or light bands
• Dark or light streaks
  Fuzzy print
• Gray background or dark print
  • Light print
• Loose toner
• Missing toner
  • Scattered dots of toner
• Skewed images
  • Smears
  • Streaks

Troubleshoot print quality

To resolve print-quality issues, try these steps in the order presented.

• Update the printer firmware
  • Print from a different software program
• Check the paper-type setting for the print job
• Check toner-cartridge status
  • Print a cleaning page
  • Visually inspect the toner cartridge or cartridges
  • Check paper and the printing environment
  • Try a different print driver
• Troubleshoot color quality
• Check the EconoMode settings
• Adjust print density

To troubleshoot specific image defects, see Troubleshoot Image Defects.

Update the printer firmware

Try upgrading the printer firmware.

See www.hp.com/support for more information.

Print from a different software program

Try printing from a different software program.

If the page prints correctly, the problem is with the software program from which you were printing.

Check the paper-type setting for the print job

Check the paper type setting when printing from a software program and the printed pages have smears, fuzzy or dark print, curled paper, scattered dots of toner, loose toner, or small areas of missing toner.

• Check the paper type setting on the printer
  • Check the paper type setting (Windows)
• Check the paper type setting (macOS)

Check the paper type setting on the printer

Check the paper type setting on the printer control panel, and change the setting as needed.

1. Open the tray.
2. Verify that the tray is loaded with the correct type of paper.
3. Close the tray.
4. Follow the control panel instructions to confirm or modify the paper type settings for the tray.

Check the paper type setting (Windows)

Check the paper type setting for Windows, and change the setting as needed.

1. From the software program, select the Print option.
2. Select the printer, and then click the Properties or Preferences button.
3. Click the Paper/Quality tab.

4. From the Paper Type drop-down list, click the More... option.

5. Expand the list of Type is: options.

6. Expand the category of paper types that best describes your paper.

7. Select the option for the type of paper you are using, and click the OK button.

8. Click the OK button to close the Document Properties dialog box. In the Print dialog box, click the OK button to print the job.

Check the paper type setting (macOS)

Check the paper type setting for macOS, and change the setting as needed.

1. Click the File menu, and then click the Print option.
2. In the Printer menu, select the printer.
3. Click Show Details or Copies & Pages.
4. Open the menus drop-down list, and then click the Paper/Quality menu.
5. Select a type from the Media Type drop-down list.
6. Click the Print button.

Check toner-cartridge status

Follow these steps to check the estimated life remaining in the toner cartridges, and if applicable, the status of other replaceable maintenance parts.

• Step one: Print a supplies status page
• Step two: Check supplies status

Step one: Print a supplies status page

Use the control panel menus to print a supplies status page.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
2. Scroll to and touch Reports.
3. Scroll to and touch Supplies Status Page to print the report.

Step two: Check supplies status

The supplies status page contains information about the cartridges and other replaceable maintenance parts.

1. Look at the supplies status page to check the percent of life remaining for the toner cartridges, and if applicable, the status of other replaceable maintenance parts.

2. Print quality problems can occur when using a toner cartridge that is at its estimated end of life. The supplies status page indicates when a supply level is very low.

3. HP's Premium Protection Warranty expires when a message indicating that HP's Premium Protection Warranty on this supply has ended appears on the supplies status page or in the EWS.
4. The toner cartridge does not need to be replaced now unless the print quality is no longer acceptable. Consider having a replacement cartridge available to install when print quality is no longer acceptable.

5. If you determine that you need to replace a toner cartridge, or another replaceable maintenance part, the genuine HP part numbers are listed on the supplies status page.

6. Check to see if you are using a genuine HP cartridge.

A genuine HP toner cartridge has "HP" on it, or it has the HP logo. For more information on identifying HP cartridges go to www.hp.com/go/learnaboutsupplies.

Print a cleaning page

During the printing process, paper, toner, and dust particles can accumulate inside the printer and can cause print-quality issues such as toner specks or spatter, smears, streaks, lines, or repeating marks.

Use the following procedure to print a cleaning page:

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Scroll to and touch the following menus:

3. Printer Maintenance

4. Print Quality Tools

5. Cleaning Page

6. When prompted, load plain Letter or A4 size paper, and then touch OK.

A Cleaning message displays on the printer control panel. Wait until the process is complete. Discard the page that prints.

Visually inspect the toner cartridge or cartridges

Follow these steps to inspect each toner cartridge:

1. Remove the toner cartridge from the printer, and verify that the sealing tape has been removed.
2. Check the memory chip for damage.
3. Examine the surface of the green imaging drum.

CAUTION: Do not touch the imaging drum. Fingerprints on the imaging drum can cause print-quality problems.

1. If you see any scratches, fingerprints, or other damage on the imaging drum, replace the toner cartridge.

2. Reinstall the toner cartridge and print a few pages to see if the problem has resolved.

Check paper and the printing environment

Use the following information to check the paper selection and the printing environment.

• Step one: Use paper that meets HP specifications
  • Step two: Check the environment
  • Step three: Set the individual tray alignment

Step one: Use paper that meets HP specifications

Some print-quality problems arise from using paper that does not meet HP specifications.

● Always use a paper type and weight that this printer supports.
- Use paper that is of good quality and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, staples, and curled or bent edges.
- Use paper that has not been previously printed on.
- Use paper that does not contain metallic material, such as glitter.
- Use paper that is designed for use in laser printers. Do not use paper that is designed only for use in Inkjet printers.
• Use paper that is not too rough. Using smoother paper generally results in better print quality.

Step two: Check the environment

The environment can directly affect print quality and is a common cause of print-quality or paper-feeding issues. Try the following solutions:

• Move the printer away from drafty locations, such as open windows or doors, or air-conditioning vents.
  • Make sure the printer is not exposed to temperatures or humidity outside of printer specifications.
• Do not place the printer in a confined space, such as a cabinet.
• Place the printer on a sturdy, level surface.
• Remove anything that is blocking the vents on the printer. The printer requires good air flow on all sides, including the top.
• Protect the printer from airborne debris, dust, steam, grease, or other elements that can leave residue inside the printer.

Step three: Set the individual tray alignment

Follow these steps when text or images are not centered or aligned correctly on the printed page when printing from specific trays.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Scroll to and open the following menus:

3. Tray Management

4. Image Adjust

5. Select the tray to adjust, and then touch Print Test Page to print the report.

6. Follow the instructions on the printed pages.
7. Touch Print Test Page again to verify the results, and then make further adjustments if necessary.

Try a different print driver

Try a different print driver when printing from a software program and the printed pages have unexpected lines in graphics, missing text, missing graphics, incorrect formatting, or substituted fonts.

Download any of the following drivers from the HP Web site: www.hp.com/support/colorljM479MFP.

Table 9-3 Print drivers

Driver Description
HP PCL.6 driver	If available, this printer-specific print driver supports older operating systems like Windows XP and Windows Vista. For a list of supported operating systems, go towww.hp.com/go/support.
HP PCL 6 driver	This printer-specific print driver supports Windows 7 and newer operating systems that support version 3 drivers. For a list of supported operating systems, go towww.hp.com/go/support.
HP PCL-6 driver	This product-specific print driver supports Windows 8 and newer operating systems that support version 4 drivers. For a list of supported operating systems, go towww.hp.com/go/support.
HP UPD PS driver	Recommended for printing with Adobe software programs or with other highly graphics-intensive software programsProvides support for printing from Postscript emulation needs, or for Postscript flash font support
HP UPD PCL 6	Recommended for printing in all Windows environmentsProvides the overall best speed, print quality, and printer feature support for most usersDeveloped to align with Windows Graphic Device Interface (GDI) for best speed in Windows environmentsMight not be fully compatible with third-party and custom software programs that are based on PCL 5

Troubleshoot color quality

Try the suggested steps if you have issues with color alignment or the quality of color images.

• Calibrate the printer to align the colors
- Adjust color settings (Windows)
• Print and interpret the print quality page

Calibrate the printer to align the colors

Calibration is a printer function that optimizes print quality, and can help resolve print-quality problems such as misaligned color, colored shadows, blurry graphics, or other print-quality issues.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Scroll to and touch the following menus:

3. Printer Maintenance

4. Color Calibration

A Calibrating message will display on the printer control panel. The calibration process takes a few minutes to complete. Do not turn off the printer until the calibration process has finished.

1. Wait while the printer calibrates, and then try printing again.

Adjust color settings (Windows)

When printing from a software program, follow these steps if colors on the printed page do not match colors on the computer screen, or if the colors on the printed page are not satisfactory.

1. From the software program, select the Print option.
2. Select the printer, and then click the Properties or Preferences button.

3. Click the Color tab.

4. Click the Print in Grayscale option to print a color document in black and shades of gray. Use this option to print color documents for photocopying or faxing. Also use this option to print draft copies or to save color toner.

5. Click the OK button to close the Document Properties dialog box. In the Print dialog box, click the OK button to print the job.

Print and interpret the print quality page

Use the following procedure to print and interpret the print quality page.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Scroll to and open the following menus:

3. Reports

4. Print Quality Report

3. Touch OK to print the page.

This page contains five bands of color, which are divided into four groups as indicated in the following illustration. By examining each group, you can isolate the problem to a particular toner cartridge.

Figure 9-8 Print quality page

1

2

3

4

Section Toner cartridge

1 Yellow

2 Cyan

3 Black

4 Magenta

• If dots or streaks appear in only one of the groups, replace the toner cartridge that correlates with that group.
• If dots appear in more than one group, print a cleaning page. If this does not solve the problem, determine if the dots are always the same color; for example, if magenta dots appear in all five color bands. If the dots are all the same color, replace that toner cartridge.
• If streaks appear in multiple color bands, contact HP. A component other than the toner cartridge is probably causing the problem.

Check the EconoMode settings

HP does not recommend the full-time use of EconoMode. If EconoMode is used full-time, the toner supply might outlast the mechanical parts in the toner cartridge. If print quality begins to degrade and is no longer acceptable, consider replacing the toner cartridge.

NOTE: This feature is available with the PCL 6 print driver for Windows. If you are not using that driver, you can enable the feature by using the HP Embedded Web Server.

Follow these steps if the entire page is too dark or too light:

1. From the software program, select the Print option.
2. Select the printer, and then click the Properties or Preferences button.
3. Click the Paper/Quality tab, and locate the Print Quality area.
4. If the entire page is too dark, use these settings:

- Select the 600 dpi option, if available.

- Select the EconoMode check box to enable it.

If the entire page is too light, use these settings:

- Select the FastRes 1200 option, if available.

• Clear the EconoMode check box to disable it.

1. Click the OK button to close the Document Properties dialog box. In the Print dialog, click the OK button to print the job.

Adjust print density

Adjust the print density when your printing results are too dense or too light in color.

Complete the following steps to adjust the print density:

1. Open the HP Embedded Web Server:

a. From the Home screen on the printer control panel, touch the Wireless icon (P) or the Ethernet icon to view the printer's IP address or host name.

b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the printer control panel. Press the Enter key on the computer keyboard. The EWS opens.

https://10.10.XXXX/

NOTE: If a message displays in the web browser indicating that the website might not be safe, select the option to continue to the website. Accessing this website will not harm the computer.

1. On the EWS Home page, click the Tools tab.

2. In the left navigation pane, click Utilities to expand the options, and then click Print Density.

3. Under Print Density, adjust the setting as desired.

4. Click Apply to save the changes.

Troubleshoot image defects

Review examples of image defects and steps to resolve these defects.

Table 9-4 Image defects table quick reference
Defect Defect Defect

AaBbCcAaBbCcAaBbCcAaBbCcAaBbCcAaBbCc

AaBbCcAaBbCcAaBbCcAaBbCcAaBbCcAaBbCcAaBbCc

Table 9-6 Black page on page 150 Table 9-5 Banding defects on page 150 Table 9-14 Streak defects on page 156

Table 9-4 Image defects table quick reference (continued)

Defect Defect Defect
Table 9-9 Fixing/fuser defects on page 152	Table 9-11 Image placement defects on page 153	Table 9-8 Color plane registrations defects (color models only) on page 151

Table 9-13 Output defects on page 155

Illustration of a HP printer with a paper lid and arrow indicating compression (no text or symbols)

Image defects, no matter the cause, can often be resolved using the same steps. Use the following steps as a starting point for solving image defect issues.

1. Reprint the document. Print quality defects can be intermittent in nature or can go away completely with continued printing.
2. Check the condition of the cartridge or cartridges. If a cartridge is in a Very Low state (it has passed the rated life), replace the cartridge.
3. Make sure that the driver and tray print mode settings match the media that is loaded in the tray. Try using a different ream of media or a different tray. Try using a different print mode.
4. Make sure the printer is within the supported operating temperature/humidity range.
5. Make sure that the paper type, size, and weight are supported by the printer. See the printer support page at support.hp.com for a list of the supported paper sizes and types for the printer.

NOTE: The term "fusing" refers to the part of the printing process where toner is affixed to paper.

The following examples depict letter-size paper that has passed through the printer with the short edge first.

Table 9-5 Banding defects

Sample Description Possible solutions
	Dark or light lines which repeat down the length of the page, and are wide-pitch and/or impulse bands. They might be sharp or soft in nature. The defect displays only in areas of fill, not in text or sections with no printed content.	1. Reprint the document.2. Try printing from another tray.3. Replace the cartridge.4. Use a different paper type.5. Enterprise models only: From the Home screen on the printer control panel, go to theAdjust Paper Typesmenu, and then choose a print mode that is designed for a slightly heavier media than what you are using. This slows the print speed and might improve the print quality.6. If the issue persists, go tosupport.hp.com.

Table 9-6 Black page

Sample Description Possible solutions
	The entire printed page is black.
	1. Visually inspect the cartridge to check for damage.
	2. Make sure that the cartridge is installed correctly.
	3. Replace the cartridge.
	4. If the issue persists, go tosupport.hp.com.

Table 9-7 Blank page — No print

Sample Description Possible solutions
	The page is completely blank and contains no printed content.1. Make sure that the cartridges are genuine HP cartridges.2. Make sure that the cartridge is installed correctly.3. Print with a different cartridge.4. Check the paper type in the paper tray and adjust the printer settings to match. If necessary, select a lighter paper type.5. If the issue persists, go tosupport.hp.com.

Table 9-8 Color plane registrations defects (color models only)

Sample Description Possible solutions
	One or more color plane(s) is not aligned with the other color planes. This registration error will typically occur with yellow.	1. Reprint the document.2. From the printer control panel, calibrate the printer.3. If a cartridge has reached a Very Low state, or the printed output is severely faded, replace the cartridge.4. From the printer control panel use theRestore Calibrationfeature to reset the printer's calibration settings to the factory defaults.5. If the issue persists, go tosupport.hp.com.

Table 9-9 Fixing/fuser defects

Sample Description Possible solutions
	Slight shadows or offsets of the image are repeated down the page. The repeated image might fade with each recurrence.	1. Reprint the document.2. Check the paper type in the paper tray and adjust the printer settings to match. If necessary, select a lighter paper type.3. If the issue persists, go tosupport.hp.com.
	Toner rubs off along either edge of the page. This defect is more common at the edges of high-coverage jobs, and on light media types, but can occur anywhere on the page.	1. Reprint the document.2. Check the paper type in the paper tray and adjust the printer settings to match. If necessary, select a heavier paper type.3. Enterprise models only: From the printer control panel, go to theEdge-to-Edgemenu and then selectNormal.Reprint the document.4. Enterprise models only: From the printer control panel, selectAuto Include Marginsand then reprint the document.5. If the issue persists, go tosupport.hp.com.

Table 9-10 Gray background or dark print

Sample Description Possible solutions
	The image or text is darker than expected and/or the background is gray.	1. Make sure that the paper in the trays has not already been run through the printer.2. Use a different paper type.3. Reprint the document.4. Mono models only: From the Home screen on the printer control panel, go to theAdjust Toner Densitymenu, and then adjust the toner density to a lower level.5. Make sure that the printer is within the supported operating temperature and humidity range.6. Replace the cartridge.7. If the issue persists, go tosupport.hp.com.

Table 9-11 Image placement defects

Sample Description Possible solutions
	The image is not centered, or is skewed on the page. The defect occurs when the paper is not positioned properly as it is pulled from the tray and moves through the paper path.	1. Reprint the document.2. Remove the paper and then reload the tray. Make sure that all the paper edges are even on all sides.3. Make sure that the top of the paper stack is below the tray-full indicator. Do not overfill the tray.4. Make sure that the paper guides are adjusted to the correct size for the paper. Do not adjust the paper guides tightly against the paper stack. Adjust them to the indentations or markings in the tray.5. If the issue persists, go tosupport.hp.com.

Table 9-12 Light print

Sample Description Possible solutions
	The printed content is light or faded on the entire page.	1. Reprint the document.2. Remove the cartridge, and then shake it to redistribute the toner.3. Mono models only: Make sure that the EconoMode setting is disabled, both at the printer control panel and in the print driver.4. Make sure that the cartridge is installed correctly.5. Print a Supplies Status Page and check the life and usage of the cartridge.6. Replace the cartridge.7. If the issue persists, go tosupport.hp.com.

Table 9-13 Output defects

Sample Description Possible solutions
	Printed pages have curled edges. The curled edge can be along the short or long side of the paper. Two types of curl are possible:Positive curl: The paper curls toward the printed side. The defect occurs in dry environments or when printing high-coverage pages.Negative curl: The paper curls away from the printed side. The defect occurs in high-humidity environments or when printing low-coverage pages.	1. Reprint the document.2. Positive curl: From the printer control panel, select a heavier paper type. The heavier paper type creates a higher temperature for printing.Negative curl: From the printer control panel, select a lighter paper type. The lighter paper type creates a lower temperature for printing. Try storing the paper in a dry environment prior to use, or use freshly opened paper.3. Print in duplex mode.4. If the issue persists, go tosupport.hp.com.
	The paper does not stack well in the output tray. The stack might be uneven, skewed, or the pages might be pushed out of the tray and onto the floor. Any of the following conditions can cause this defect:Extreme paper curlThe paper in the tray is wrinkled or deformedThe paper is a non-standard papertype, such as envelopesThe output tray is too full	1. Reprint the document.2. Extend the output bin extension.3. If the defect is caused by extreme paper curl, refer to the troubleshooting steps for "Output curl."4. Use a different paper type.5. Use freshly opened paper.6. Remove the paper from the output tray before the tray gets too full.7. If the issue persists, go tosupport.hp.com.

Table 9-14 Streak defects

Sample Description Possible solutions
	Light vertical streaks that usually span the length of the page. The defect displays only in areas of fill, not in text or sections with no printed content.	1. Reprint the document.2. Remove the cartridge, and then shake it to redistribute the toner.3. If the issue persists, go tosupport.hp.com.NOTE: Both light and dark vertical streaks can occur when the printing environment is outside the specified range for temperature or humidity. Refer to your printer's environmental specifications for allowable temperature and humidity levels.
	Dark vertical lines which occur down the length of the page. The defect might occur anywhere on the page, in areas of fill or in sections with no printed content. On color models, these lines or streaks will also be visible on the ITB cleaning page.	1. Reprint the document.2. Remove the cartridge, and then shake it to redistribute the toner.3. Print a cleaning page.4. Check the toner level in the cartridge.5. If the issue persists, go tosupport.hp.com.

Improve copy and scan image quality

Learn how to improve the quality of copies and scanned images, and how to properly clean the scanner glass.

Introduction
- Check the scanner glass for dirt and smudges
- Check the paper settings
- Check the image adjustment settings
- Optimize for text or pictures
- Check the scanner resolution and color settings on the computer
- Edge-to-edge copying
- Clean the pickup rollers and separation pad in the document feeder

Introduction

If the printer is having image quality problems, try the following solutions in the order presented to resolve the issue.

Try these few simple steps first:

• Use the flatbed scanner rather than the document feeder.
• Use high-quality originals.

- When using the document feeder, load the original document into the feeder correctly, using the paper guides, to avoid unclear or skewed images.

If the problem still exists, try these additional solutions. If they do not fix the problem, see "Improve print quality" for further solutions.

Check the scanner glass for dirt and smudges

Over time, specks of debris might collect on the scanner glass and white plastic backing, which can affect performance. Use the following procedure to clean the scanner.

1. Press the Power button to turn off the printer, and then disconnect the power cable from the electrical outlet.
2. Open the scanner lid.
3. Clean the scanner glass and the white plastic backing underneath the scanner lid with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.

CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the printer; these can damage the printer. Do not place liquids directly on the glass or platen. They might seep and damage the printer.

1. Dry the glass and white plastic parts with a chamois or a cellulose sponge to prevent spotting.

2. Connect the power cable to an outlet, and then press the Power button to turn on the printer.

Check the paper settings

Follow these steps to check the paper settings on the printer control panel.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
2. Scroll to and touch Paper Setup, and then touch the name of the tray you are printing from.
3. Touch Paper Size, and then touch the paper size option that matches the size of paper in the tray.
4. Touch Paper Type, and then touch the paper type option that matches the type of paper in the tray.

Check the image adjustment settings

To improve copy quality, adjust the image settings using the printer control panel.

1. From the Home screen on the printer control panel, touch the Copy icon.
2. Touch the Document or ID Card icon.

3. Touch the Settings icon ⚙, and then scroll to and touch the following menu items to adjust the settings:
   ●Quality: Choose the output quality for the image.
   ●Lighter/Darker: Adjust the lightness/darkness setting.
   ●Enhancements: Choose an image enhancement option.
   • Binding Margin: Turn the binding margin setting on or off.

4. Touch the Back button ↩ to return to the main copy menu, and then touch Copy to begin copying.

Optimize for text or pictures

Follow these steps to optimize the scan or copy for text or pictures.

1. From the Home screen on the printer control panel, touch the Copy icon.
2. Touch the Document or ID Card icon.

3. Touch the Settings icon ⚙️, and then scroll to and touch Enhancements.

4. Touch one of the following options depending on the type of document you are copying:

5. None: Use this setting when you are not concerned about the quality of the copy. This is the default setting.

6. Text: Use this setting for documents that contain mostly text.
   • Photo: Use this setting for photos or documents that contain mostly graphics.
7. Mixed: Use this setting for documents that contain a mixture of text and graphics.

Check the scanner resolution and color settings on the computer

If you are printing a scanned image, and the quality is not what you expected, you might have selected a resolution or color setting in the scanner software that does not match your needs. Resolution and color affect the following features of scanned images:

• Resolution and color guidelines
Color
- Image clarity
• Texture of gradations (smooth or rough)
- Scan time
- File size

Scanning resolution is measured in pixels per inch (ppi).

NOTE: Scanning ppi levels are not interchangeable with printing dpi (dots per inch) levels.

Color, grayscale, and black and white define the number of colors possible. You can adjust the scanner hardware resolution for up to 1200 ppi.

The resolution and color guidelines table lists simple tips that you can follow to meet your scanning needs.

NOTE: Setting the resolution and color to a high value can create large files that take up disk space and slow the scanning process. Before setting the resolution and color, determine how you are going to use the scanned image.

Resolution and color guidelines

The following table describes the recommended resolution and color settings for different types of scan jobs.

NOTE: The default resolution is 200 ppi.

Table 9-15 Resolution and color guidelines

Intended use Recommended resolution Recommended color settings

Fax 150 ppi • Black and White

Email 150 ppi • Black and White, if the image does not require smooth gradation• Grayscale, if the image requires smooth gradation• Color, if the image is in color

Edit text 300 ppi • Black and White

Table 9-15 Resolution and color guidelines (continued)

Intended use Recommended resolution Recommended color settings
Print (graphics or text) 600 ppi for complex graphics, or if you want to significantly enlarge the document	Black and White for text and line artGrayscale for shaded or colored graphics and photosColor, if the image is in color
300 ppi for normal graphics and text
150 ppi for photos
Display on screen 75 ppi • Black and White for text	Grayscale for graphics and photosColor, if the image is in color

Color

You can set the color values to the following settings when scanning.

Table 9-16 Color settings

Setting Recommended use
Color Use this setting for high-quality color photos or documents in which the color is important.
Black and White Use this setting for text documents.
Grayscale	Use this setting when file size is an issue or when you want to scan a document or photograph quickly.

Edge-to-edge copying

The printer cannot print fully edge-to-edge. There is a 4 mm (1/6 inch) unprintable border around the page.

Considerations for printing or scanning documents with cropped edges:

• When the original is smaller than the output size, move the original 4 mm (1/6 inch) away from the corner indicated by the icon on the scanner. Recopy or scan in this position.
• When the original is the size of the printed output that you want, use the Reduce/Enlarge feature to reduce the image so the copy is not cropped.

Clean the pickup rollers and separation pad in the document feeder

If the document feeder experiences paper handling problems, such as jams or multiple-page feeds, clean the document feeder rollers and separation pad.

1. Open the document feeder access cover.

Diagram of a printer's internal structure showing internal compartments and a blue arrow indicating the open lid (no text or symbols present)

1. Use a moist, lint-free cloth to wipe both pickup rollers and the separation pad to remove dirt.

CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the printer; these can damage the printer.

Technical line drawing of a car interior showing structural components and highlighted areas (no text or symbols)

1. Close the document feeder access cover.

Diagram of a printer's internal structure with a blue arrow indicating the process (no text or symbols present)

Improve fax image quality

Review the following information to improve fax image quality.

Introduction
- Check the scanner glass for dirt and smudges
- Check the send-fax resolution settings
- Check the Error Correction Mode setting
- Send to a different fax machine
- Check the sender's fax machine

Introduction

If the printer is having image quality problems, try the following solutions in the order presented to resolve the issue.

Try these few simple steps first:

• Use the flatbed scanner rather than the document feeder.
  • Use high-quality originals.

- When using the document feeder, load the original document into the feeder correctly, using the paper guides, to avoid unclear or skewed images.

If the problem still exists, try these additional solutions. If they do not fix the problem, see "Improve print quality" for further solutions.

Check the scanner glass for dirt and smudges

Over time, specks of debris might collect on the scanner glass and white plastic backing, which can affect performance. Use the following procedure to clean the scanner.

1. Press the Power button to turn off the printer, and then disconnect the power cable from the electrical outlet.

2. Open the scanner lid.

3. Clean the scanner glass and the white plastic backing underneath the scanner lid with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.

CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the printer; these can damage the printer. Do not place liquids directly on the glass or platen. They might seep and damage the printer.

1. Dry the glass and white plastic parts with a chamois or a cellulose sponge to prevent spotting.

2. Connect the power cable to an outlet, and then press the Power button to turn on the printer.

Check the send-fax resolution settings

If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the printer attempts to redial based on the redial-on-busy, redial-on-no-answer, and redial-on-communication-error options.

1. From the Home screen on the printer control panel, swipe right and touch the Fax icon.
2. Touch Send Now, and then touch the Settings icon.
3. Touch Resolution, and then touch the desired setting.

Try the Standard resolution setting if the fax will not send with a higher resolution.

Check the Error Correction Mode setting

Usually, the printer monitors the signals on the telephone line while it is sending or receiving a fax. If the printer detects an error during the transmission and the Error Correction Mode setting is On, the printer can request that the portion of the fax be resent. The factory-set default for error correction is On.

You should turn off error correction only if you are having trouble sending or receiving a fax, and you are willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection.

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
2. Swipe right and touch the Setup icon.
3. Touch Preferences.
4. Scroll to Error Correction Mode and then touch the button to turn the setting off or on.

Send to a different fax machine

Try sending the fax to a different fax machine. If the fax quality is better, the problem is related to the initial recipient's fax machine settings or supplies status.

Check the sender's fax machine

Ask the sender to try sending from a different fax machine. If the fax quality is better, the problem is with the sender's fax machine. If a different fax machine is unavailable, ask the sender to consider making the following changes:

• Make sure the original document is on white (not colored) paper.
• Increase the fax resolution, quality level, or contrast settings.
• If possible, send the fax from a computer software program.

Solve wired network problems

Check the following information to resolve wired network issues.

Introduction
• Poor physical connection
• The computer is using the incorrect IP address for the printer
• The computer is unable to communicate with the printer
• The printer is using incorrect link and duplex settings for the network
• New software programs might be causing compatibility problems
• The computer or workstation might be set up incorrectly
• The printer is disabled, or other network settings are incorrect

Introduction

Certain types of problems can indicate there is a network communication problem. These problems include the following issues:

Poor physical connection

Check the cable connections.

1. Verify that the printer is attached to the correct network port using a cable of the correct length.
2. Verify that cable connections are secure.
3. Look at the network port connection on the back of the printer, and verify that the amber activity light flashes indicating network traffic, and the green link-status light is continuously lit indicating a network link.
4. If the problem continues, try a different cable or port on the hub.

The computer is using the incorrect IP address for the printer

If the computer is using the incorrect IP address for the printer, try these solutions.

1. Open the printer properties and click the Ports tab. Verify that the current IP address for the printer is selected. The printer IP address is listed on the printer configuration page.
2. If you installed the printer using the HP standard TCP/IP port, select the check box next to Always print to this printer, even if its IP address changes.
3. If you installed the printer using a Microsoft standard TCP/IP port, use the hostname instead of the IP address.
4. If the IP address is correct, delete the printer and then add it again.

The computer is unable to communicate with the printer

Verify that the printer is communicating with the network and your computer.

1. Test network communication by pinging the network.

a. Open a command-line prompt on your computer.

• For Windows, click Start, click Run, type cmd, and then press Enter.
• For macOS, go to Applications, then Utilities, and open Terminal.

b. Type ping followed by the IP address for your printer.

c. If the window displays round-trip times, the network is working.

1. If the ping command failed, verify that the network hubs are on, and then verify that the network settings, the printer, and the computer are all configured for the same network (also known as subnet).
2. If the network is working, make sure that the computer is using the correct IP address for the printer.

a. Open the printer properties and click the Ports tab. Verify that the current IP address for the printer is selected. The printer IP address is listed on the printer configuration page.

b. If you installed the printer using the HP standard TCP/IP port, select the box labeled Always print to this printer, even if its IP address changes.

c. If you installed the printer using a Microsoft standard TCP/IP port, use the printer's hostname instead of the IP address.

d. If the IP address is correct, delete the printer and then add it again.

The printer is using incorrect link and duplex settings for the network

HP recommends leaving these settings in automatic mode (the default setting). If you change these settings, you must also change them for your network.

New software programs might be causing compatibility problems

Verify that any new software programs are correctly installed and that they use the correct print driver.

The computer or workstation might be set up incorrectly

An incorrectly configured computer can cause issues with printing.

1. Check the network drivers, print drivers, and the network redirection settings.
2. Verify that the operating system is configured correctly.

The printer is disabled, or other network settings are incorrect

Check the network settings.

1. Review the printer's configuration/networking pages to check the status of the network settings and protocols.
2. Reconfigure the network settings if necessary.

Solve wireless network problems

To resolve network issues, try these steps in the order presented.

Introduction
• Wireless connectivity checklist
The printer does not print after the wireless configuration completes
The printer does not print, and the computer has a third-party firewall installed
• The wireless connection does not work after moving the wireless router or printer
- Cannot connect more computers to the wireless printer
• The wireless printer loses communication when connected to a VPN
• The network does not appear in the wireless networks list
• The wireless network is not functioning
• Perform a wireless network diagnostic test
- Reduce interference on a wireless network

Introduction

Use the troubleshooting information to help resolve issues.

NOTE: To determine whether Wi-Fi Direct printing is enabled on your printer, print a configuration page from the printer control panel

Wireless connectivity checklist

Review the following information to check wireless connectivity.

• Verify that the network cable is not connected.
• Verify that the printer and the wireless router are turned on and have power. Also make sure that the wireless radio in the printer is turned on.
• Verify that the service set identifier (SSID) is correct. Print a configuration page to determine the SSID. If you are not sure the SSID is correct, run the wireless setup again.
• With secured networks, verify that the security information is correct. If the security information is incorrect, run the wireless setup again.
• If the wireless network is working correctly, try accessing other computers on the wireless network. If the network has Internet access, try connecting to the Internet over a wireless connection.
• Verify that the encryption method (AES or TKIP) is the same for the printer as it is for the wireless access point (on networks using WPA security).

• Verify that the printer is within the range of the wireless network. For most networks, the printer must be within 30 m (100 ft) of the wireless access point (wireless router).

• Verify that obstacles do not block the wireless signal. Remove any large metal objects between the access point and the printer. Make sure poles, walls, or support columns containing metal or concrete do not separate the printer and wireless access point.

• Verify that the printer is located away from electronic devices that might interfere with the wireless signal. Many devices can interfere with the wireless signal including motors, cordless phones, security system cameras, other wireless networks, and some Bluetooth devices.
• Verify that the print driver is installed on the computer.
• Verify that you have selected the correct printer port.
• Verify that the computer and printer connect to the same wireless network.
• For macOS, verify that the wireless router supports Bonjour.

The printer does not print after the wireless configuration completes

If the printer does not print after the wireless configuration completes, try these solutions.

1. Make sure that the printer is turned on and in the ready state.
2. Turn off any third-party firewalls on your computer.
3. Make sure that the wireless network is working correctly.
4. Make sure that your computer is working correctly. If necessary, restart the computer.
5. Verify that you can open the printer HP Embedded Web Server from a computer on the network.

The printer does not print, and the computer has a third-party firewall installed

If the printer does not print, and the computer has a third-party firewall installed, try these solutions.

1. Update the firewall with the most recent update available from the manufacturer.
2. If programs request firewall access when you install the printer or try to print, make sure you allow the programs to run.
3. Temporarily turn off the firewall, and then install the wireless printer on the computer. Enable the firewall when you have completed the wireless installation.

The wireless connection does not work after moving the wireless router or printer

If the wireless connection does not work after moving the wireless router or printer, try these solutions.

1. Make sure that the router or printer connects to the same network that your computer connects to.
2. Print a configuration page.
3. Compare the service set identifier (SSID) on the configuration page to the SSID in the printer configuration for the computer.
4. If the numbers are not the same, the devices are not connecting to the same network. Reconfigure the wireless setup for the printer.

Cannot connect more computers to the wireless printer

If additional computers cannot connect to the wireless printer, try these solutions.

1. Make sure that the other computers are within the wireless range and that no obstacles block the signal. For most networks, the wireless range is within 30 m (100 ft) of the wireless access point.
2. Make sure that the printer is turned on and in the ready state.
3. Make sure there are not more than 5 concurrent Wi-Fi Direct users.
4. Turn off any third-party firewalls on your computer.
5. Make sure that the wireless network is working correctly.
6. Make sure that your computer is working correctly. If necessary, restart the computer.

The wireless printer loses communication when connected to a VPN

Typically, you cannot connect to a VPN and other networks at the same time.

The network does not appear in the wireless networks list

If the network does not appear in the wireless networks list, try these solutions.

• Make sure the wireless router is turned on and has power.
• The network might be hidden. However, you can still connect to a hidden network.

The wireless network is not functioning

If the wireless network is not functioning, try these solutions.

1. Make sure that the network cable is not connected.
2. To verify if the network has lost communication, try connecting other devices to the network.
3. Test network communication by pinging the network.

a. Open a command-line prompt on your computer.

• For Windows, click Start, click Run, type cmd, and then press Enter.
• For macOS, go to Applications, then Utilities, and open Terminal.

b. Type ping followed by the router IP address.

c. If the window displays round-trip times, the network is working.

1. Make sure that the router or printer connects to the same network that the computer connects to.

a. Print a configuration page.
b. Compare the service set identifier (SSID) on the configuration report to the SSID in the printer configuration for the computer.
c. If the numbers are not the same, the devices are not connecting to the same network. Reconfigure the wireless setup for the printer.

Perform a wireless network diagnostic test

From the printer control panel, you can run a diagnostic test that provides information about the wireless network settings.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon
2. Scroll to and touch Reports.
3. Scroll to and touch Wireless Test Report.

The printer prints a test page that shows test results.

Reduce interference on a wireless network

The following tips can reduce interference in a wireless network:

• Keep the wireless devices away from large metal objects, such as filing cabinets, and other electromagnetic devices, such as microwaves and cordless telephones. These objects can disrupt radio signals.
• Keep the wireless devices away from large masonry structures and other building structures. These objects can absorb radio waves and lower signal strength.
• Position the wireless router in a central location in line of sight with the wireless printers on the network.

Solve fax problems

Use the following information to solve fax problems.

Introduction
• Fax troubleshooting checklist
- Solve general fax problems

Introduction

Use the fax troubleshooting information to help resolve issues.

Fax troubleshooting checklist

After each recommended action, retry faxing to see if the problem is resolved.

For best results during fax problem solving, make sure the line from the printer is connected directly to the wall phone port. Disconnect all other devices that are connected to the printer.

1. Verify that the telephone cord is connected to the correct port on the back of the printer.
2. Check the phone line by using the fax test:

a. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon 🌐

b. Scroll to and open the following menus:

1. Fax Setup
2. Tools
3. Run Fax Test

The printer prints a fax test report. The report contains the following possible results:

• Pass: The report contains all of the current fax settings for review.
- Fail: The report indicates the nature of the error and contains suggestions for how to resolve the issue.

1. Verify that the printer firmware is current:

NOTE: To determine the current firmware version on your printer, print a Printer Status Report from the printer control panel, and then look on the report to find the firmware date code. Then visit the HP product support page (using the steps below) and compare the firmware date code to the latest firmware version that is available from HP. If there is a newer version available, follow the steps below to update the firmware on your printer.

a. Go to www.hp.com/go/support, click the Drivers & Software link, type the printer name in the search field, press the ENTER button, and then select the printer from the list of search results.
b. Select the operating system.
c. Under the Firmware section, locate the Firmware Update Utility.

NOTE: Make sure to use the firmware update utility that is specific to the printer model.

d. Click Download, click Run, and then click Run again.
e. When the utility launches, select the printer from the drop-down list, and then click Send Firmware.
f. Follow the on-screen instructions to complete the installation, and then click the Exit button to close the utility.

1. Verify that the fax was set up when the printer software was installed.

From the computer, in the HP program folder, run the Fax Setup Utility.

1. Verify that the telephone service supports analog fax.

2. If using ISDN or digital PBX, contact your service provider for information about configuring to an analog fax line.

3. If using a VoIP service, change the Fax Speed setting to Speed-Slow (9600 bps). From the control panel Home Screen, select Fax, select Setup, and then select Preferences.
4. Ask if your service provider supports fax, and what the recommended fax modem speed is. Some companies might require an adapter.
5. If you are using a DSL service, make sure that a filter is included on the phone-line connection to the printer. Contact the DSL service provider, or purchase a DSL filter if you do not have one. If a DSL filter is installed, try another filter because filters can be defective.

Solve general fax problems

Review suggestions and tips for resolving various fax-related issues.

• Faxes are sending slowly
Fax quality is poor
• Fax cuts off or prints on two pages

Faxes are sending slowly

The printer is experiencing poor phone line quality.

Try the following suggestions to resolve the issue:

• Try resending the fax when the line conditions have improved.
• Check with the phone service provider to verify that the line supports fax.

• Turn off the Error Correction Mode setting:

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
2. Swipe right and touch the Setup icon.
3. Touch Preferences.
4. Scroll to Error Correction Mode and then touch the button to turn off the setting.

NOTE: This can reduce image quality.

- Use white paper for the original. Do not use colors such as gray, yellow, or pink.

- Increase the Fax Speed setting:

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.
2. Swipe right and touch the Setup icon.
3. Touch Preferences, and then scroll to and touch Speed.
4. Touch the desired speed setting.

- Divide large fax jobs into smaller sections, and then fax them individually.

Fax quality is poor

Faxes are blurry or too light.

Try the following suggestions to resolve the issue:

- Increase fax resolution when sending faxes:

NOTE: Resolution does not affect received faxes.

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.

2. Touch the Send Now icon.

3. Touch the Settings icon ⚙, and then touch Resolution.

4. Touch the desired resolution setting.

NOTE: Increasing resolution slows transmission speed.

• Turn on the Error Correction Mode setting:

1. From the Home screen on the printer control panel, swipe right and then touch the Fax icon.

2. Swipe right and touch the Setup icon.

3. Touch Preferences.

4. Scroll to Error Correction Mode and then touch the button to turn on the setting.

- Check the toner cartridges and replace if necessary.

- Ask the sender to darken the contrast setting on the sending fax machine, and then resend the fax.

Fax cuts off or prints on two pages

If the paper size settings on the printer do not match the paper size of the document being faxed, the received fax might be missing content, or it could print on two pages.

Try the following suggestions to resolve the issue:

- Set the Default Paper Size setting:

NOTE: Faxes print on a single size of paper based on the Default Paper Size settings.

1. From the Home screen on the printer control panel, swipe the tab at the top of the screen downward to open the Dashboard, and then touch the Setup icon

2. Scroll to and open the following menus:

3. Tray Management

4. Tray Assignment

5. Default Paper Size

6. Touch the desired paper size from the list of options.

- Set the paper type and size for the tray that is used for faxes.

Index

Symbols/Numerics

550-sheet paper trays

part numbers 34

A

accessories

ordering 34

part numbers 34

acoustic specifications 14

Address Book

set up 78

AirPrint 64, 67

Android devices

printing from 64, 67

applications

downloading 103

Apps menu 103

B

bin, output

locating 4

browser requirements

HP Embedded Web Server 105

C

calibrate

colors 145

cartridge

dynamic security 36

replacing 44

cartridge policy 37, 38

cartridge protection 37, 41

cartridges

order numbers 44

checklist

fax troubleshooting 171

wireless connectivity 167

cleaning

glass 157, 163

paper path 139

color options

changing, Windows 145

color theme

changing, Windows 145

colors

calibrate 145

Contact Lists

set up 78

control panel

help 118

locating 4

locating features 6

copying

edges of documents 157, 160

multiple copies 69

optimizing for text or pictures 157

setting paper size and type 157

single copies 69

two-sided documents 70

customer support

online 117

D

deleting

stored jobs 58, 63

dimensions, printer 12

document feeder 70

copying two-sided documents 70

faxing from 95

jams 128

paper-feeding problems 126

double-sided copying 70

double-sided printing

Mac 55

Windows 52

drivers, supported 10

duplex 70

duplex printing

Mac 55

duplex printing (double-sided)

settings (Windows) 52

Windows 52

duplexer

clear jams 135

duplexing

automatically (Windows) 52

manually (Mac) 55

manually (Windows) 52

dynamic security

toner cartridge 36

E

EconoMode setting 113, 139

economy settings 113

electrical specifications 14

electronic faxes

sending 95

Embedded Web Server (EWS)

assigning passwords 112

features 105

envelopes

orientation 19, 31

envelopes, loading 31

Ethernet (RJ-45)

locating 5

F

fax

sending from software 95

solve general problems 171, 173

speed dials 95, 100

fax port

locating 5

fax troubleshooting

checklist 171

faxing

from a computer (Windows) 95

from the document feeder 95

from the flatbed scanner 95

firmware

updating 115

fuser

jams 136

G

genuine HP cartridges 37, 38

glass, cleaning 157, 163

H

Help button

locating 6

help, control panel 118

Home button

locating 6

HP Customer Care 117

HP Easy Scan Software (macOS) 74

HP Embedded Web Server (EWS) features 105

HP ePrint 66

HP EWS, using 105

HP Printer Home Page, using 105

HP Scan software (Windows) 73

HP Web Jetadmin 114

HP Web Services

applications 103

enabling 103

|

image quality

check toner-cartridge status 139, 141

image quality issues

examples and solutions 138

interface ports

locating 5

IP network settings

configure 109

J

jams

causes of 127

document feeder 128

duplexer 135

fuser 136

locations 128

output bin 128, 135

Tray 1 131

Tray 2 133

Jetadmin, HP Web 114

jobs, stored

creating (Windows) 58

deleting 58, 63

Mac settings 58

printing 58

L

LAN port

locating 5

loading

paper in Tray 1 18

paper in Tray 2 22

paper in Tray 3 27

local area network (LAN)

locating 5

M

Mac driver settings

Job Storage 58

manual duplex

Mac 55

Windows 52

memory

included 9

memory chip (toner)

locating 44

Microsoft Word, faxing from 95

mobile printing

Android devices 64, 67

mobile printing, software supported 12

multiple pages per sheet

printing (Mac) 55

printing (Windows) 52

N

network settings 109

networks

HP Web Jetadmin 114

supported 9

number of copies, changing 69

0

on/off button

locating 4

online help, control panel 118

online support 117

Open source license 3

operating systems, supported 10

ordering

supplies and accessories 34

output bin

clear jams 128, 135

locating 4

P

pages per minute 9

pages per sheet

selecting (Mac) 55

selecting (Windows) 52

paper

jams 127

loading Tray 1 18

loading Tray 2 22

loading Tray 3 27

selecting 139, 143

Tray 1 orientation 19

Tray 2 orientation 24

Tray 3 orientation 29

paper jams

document feeder 128

duplexer 135

fuser 136

locations 128

output bin 128, 135

Tray 1 131

Tray 2 133

paper pickup problems

solving 122, 124

paper trays

part numbers 34

paper type

selecting (Windows) 52

paper types

selecting (Mac) 55

paper, ordering 34

part numbers

accessories 34

replacement parts 36

supplies 34

toner cartridges 34

phone book, fax adding entries 95, 100

ports locating 5

potential shock hazard 2

power consumption 14

power connection locating 5

power switch locating 4

print drivers, supported 10

print on both sides Mac 55 manually, Windows 52 Windows 52

printing from USB flash drives 68 stored jobs 58

printing on both sides settings (Windows) 52

private printing 58

product number locating 4

protect cartridges 37, 41

R

replacement parts part numbers 36

replacing toner cartridges 44

RJ-45 port locating 5

S

scan setup scan to computer 84 scan to email 75 scan to network folder 79 scan to SharePoint 83

Scan to Email set up with EWS 78

scanner faxing from 95 glass cleaning 157, 163

scanning from HP Easy Scan Software (macOS) 74 from HP Scan software (Windows) 73

to computer 86 to email 85 to network folder 85 to SharePoint 86 to USB drive 84

security features 112

sending faxes from software 95

serial number locating 4

shut down after delay setting 113

Sign In button locating 6

Sign Out button locating 6

sleep delay setting 113

software sending faxes 95

solve problems fax 171, 173

specifications electrical and acoustic 14 printer 9

speed dials deleting entries 100 editing entries 100 programming 95

Start Copy button locating 6

storage, job Mac settings 58

store print jobs 58

stored jobs creating (Mac) 58 creating (Windows) 58 deleting 58, 63 printing 58

storing jobs with Windows 58

supplies low threshold settings 119 ordering 34

part numbers 34

replacing toner cartridges 44 using when low 119

support online 117

supported operating systems 10

system requirements HP Embedded Web Server 105 minimum 9

T

technical support online 117

toner cartridge dynamic security 36 low threshold settings 119 using when low 119

toner cartridges components 44 order numbers 44 part numbers 34 replacing 44

touchscreen locating features 6

Tray 1 jams 131 loading 18 loading envelopes 31 paper orientation 19

Tray 2 jams 133 loading 22 paper orientation 24

Tray 3 loading 27 paper orientation 29

trays capacity 9 included 9 locating 4

troubleshooting check toner-cartridge status 139, 141 color quality 145 faxes 171 jams 127 network problems 165 paper feed problems 122 print quality 139 wired network 165 wireless network 167

two-sided copying 70 two-sided printing settings (Windows) 52

U

USB 2.0 printing port

locating 5

USB flash drives

printing from 68

USB port

locating 5

W

walk-up USB printing 68

web browser requirements

HP Embedded Web Server 105

Web Services

applications 103

enabling 103

Web sites

customer support 117

HP Web Jetadmin, downloading

114

weight, printer 12

Wi-Fi Direct Print 12

Wi-Fi Direct Printing 64, 65

Windows

faxing from 95

wireless network

troubleshooting 167

wireless network interference 167, 170

Word, faxing from 95