Pesaro 17-12150-765 - Watch Bruno Söhnle - Free user manual and instructions

Product Type	Automatic Watch
Brand	Bruno Söhnle
Model	Pesaro 17-12150-765
Movement	Automatic (Sellita SW 200 refined to BS 175)
Case Material	Stainless steel 316L (surgical steel)
Glass	Sapphire crystal (non-reflective, scratch-resistant)
Strap	Leather with nickel-free clasp
Water Resistance	3 bar (30 m) - resistant to splashes, not for swimming
Power Reserve	Up to 38 hours when fully wound
Diameter	Approx. 40 mm (not specified)
Weight	Approx. 80 g (estimated)
Functions	Hours, minutes, seconds, date (quick-set)
Winding	Manual via crown (30 rotations clockwise to fully wind)
Crown	Screw-down (ensure water resistance)
Warranty	24 months from purchase date
Manufacturing Location	Glashütte, Germany
Movement Visibility	Visible through sapphire case back
Care	Avoid strong magnetic fields, chemicals, impacts; clean with soft cloth
Periodic Inspection	Every 3 years for trouble-free operation
Water Resistance Check	Annually or before high water exposure

Frequently Asked Questions - Pesaro 17-12150-765 Bruno Söhnle

How do I wind my Bruno Söhnle watch?

Unscrew the crown counter-clockwise (if screw-down), then turn it clockwise about 30 times to fully wind the mainspring. The watch will then run automatically with wrist movement.

How do I set the time?

Pull the crown out to position 3 (fully extended) to stop the seconds hand. Turn the crown to set the correct time, then push the crown back to position 1 to restart the movement.

How do I set the date?

Pull the crown to position 2 (first click) and turn it to set the date. Avoid using the quick-set function between 10 p.m. and 3 a.m., as the date change mechanism is engaged.

What is the power reserve of this watch?

When fully wound, the power reserve is up to 38 hours. If worn daily, the automatic winding system keeps it running; if not worn enough, manual winding may be needed.

Is my watch water resistant? Can I swim with it?

This model is water resistant to 3 bar (30 meters), which protects against splashes but not swimming or submersion. For swimming, a 5 bar rating is required. Have the seals checked annually.

How often should I service my Bruno Söhnle watch?

Bruno Söhnle recommends an inspection every 3 years to maintain trouble-free operation. Also, water resistance should be checked annually.

What should I avoid to keep my watch in good condition?

Avoid strong magnetic fields (e.g., speakers), chemicals (solvents, gases), extreme temperatures, and heavy impacts. Clean with a soft cloth to prevent skin irritation.

What is the warranty period and what does it cover?

The warranty is 24 months from purchase and covers manufacturing defects. It does not cover glass breakage, strap wear, water damage from misuse, or normal wear and tear.

My watch stopped running. Is it broken?

Not necessarily. If not worn for a while, the power reserve may be depleted. Wind the crown manually about 30 turns. If it still doesn't run, contact an authorized dealer.

How do I care for the leather strap?

Leather straps are not waterproof. Keep away from water and moisture. Wipe with a dry cloth; avoid synthetic dyes. The clasp is nickel-free to prevent allergic reactions.

USER MANUAL Pesaro 17-12150-765 Bruno Söhnle

Close-up of mechanical gears and interlocking components, no visible text or symbols

MECHANIK EDITIONEN

QUALITÄTSPASS QUALITY PASSPORT

BRUNO SÖHNLE UHRENATELIER

GLASHÜTTEISA

Licensed dealers and descriptions of our watches in other languages can be found on the Internet at www.brunosoehnle.de

BEDIENUNGSANLEITUNG

Licensed dealers and descriptions of our watches in other languages can be found on the Internet at www.brunosoehnle.de

for the following automatic movements:

Basic movement: Refined BS movement:

Sellita SW 200 → BS 175

Sellita SW 240 → BS 297

Sellita SW 260 → BS 212

QUALITYCERTIFICATE

We congratulate you on your Bruno Söhnle watch.

In order for you to fully enjoy your watch, we recommend that you read through these operating instructions and note the following information.

Bruno Söhnle watches are manufactured and inspected by our qualified watchmakers in the former Assmann house in Glashütte/Sachsen, a town with a long tradition of watchmaking. A timekeeping variation of approx. 20 seconds a day can nevertheless occur. This is also an idiosyncrasy of the best mechanical watches and is normal for a vibrant watch movement. The models are adjusted so that they run slightly fast. The fully wound automatic watch will reach a power reserve of up to 38 hours after it is taken off.

BRUNO SÖHNLE UHRENATELIER

GLASHÜTTEISA

Please note that automatic watches are not absolutely accurate and can stop if they are moved too little during the day! If this should be the case, you can also manually wind the watch using the crown.

(Clockwise, approx. 30 rotations = fully wound)

With this quality passport, we guarantee the flawless operation of your Bruno Söhnle watch. Any possible defects are covered by our 24-month warranty starting on the date of purchase.

P rurchase. Bruno L###ule

Bruno

Söhnle

QUALITY CERTIFICATE

MECHANISM EDITIONS

WARRANTY OPERATING INSTRUCTIONS

for Bruno Söhnle automatic movement

FINEST TECHNOLOGY

All watches from Bruno Söhnle meet the highest quality standards.

The stainless steel casings are produced from high quality and skin-friendly surgical steel (316L). The casing is characterised by its hardness, high level of comfort and low nickel content.

The non-reflective sapphire glass is among the hardest of watch glasses and ensures good readability and is extremely scratch-resistant. The high level of light penetration allows the face always to appear in bright light. With some models, the crown and the glass base are screwed together. Please note that the impermeability of these watches is ONLY guaranteed when the crown is screwed in tightly. The watch strap links are also partially screwed together. The leather watch straps are free of synthetic dyes and and provided with a nickel-free clasp.

BRUNO SÖHNLE UHRENATELIER

GLASHÜTTEISA

In the watches of the automatic collection from Bruno Söhnle, the operating movement has five basic components that are produced in Glashütte and surfaces that are machined and refined by our watch workshop. The three hands and the date display are mechanically driven.

In the Bruno Söhnle workshops in Glashütte, the base plate, automatic bridge, clockwork bridge, winding bridge and balance cock are perlaged and machined on the surface with a variety of electroplatings (yellow / rosé gold and nickel).

The rotor is a proprietary development of Bruno Söhnle and is likewise manufactured in Glashütte. The manufacturer and manufacturing location are laser-engraved on the top of the rotor – clearly visible through the glass base of the watch. Every watch is designated with its own identity number.

BRUNO SÖHNLE WARRANTY

Bruno Söhnle offers a 24-month guarantee against manufacturing defects. Our product has been manufactured, inspected and tested using state-of-the-art methods. The technology used and the materials processed are of the highest quality. Should manufacturing or material defects appear during the warranty period, these will be rectified without charge by your authorised BS dealer or by the manufacturer. The amount of indemnity shall be limited to the manufacturing cost of this model.

The warranty does not include any claims for compensation, replacement or refund of the purchase price. Excluded from the warranty are defects caused by improper handling or unauthorised interventions. Also excluded are breakage of the glass, spring pins and crown, accidents and normal wear and tear. Straps and spring pins are not covered

BRUNO SÖHNLE UHRENATELIER

GLASHÜTTEISA

by the warranty. To verify the warranty claim, please complete the enclosed warranty card. Forwarding shall be at the sender's risk.

The built-in rubies in the movements are synthetic rubies. These are comparable in all their characteristics to genuine rubies. They have the advantage that they are freeof the inclusions that occur in natural rubies which could damage the wheel pins.

BRUNO SÖHNLE WARRANTY

General information on the water resistance of your watch in accordance with DIN 8310: Water resistance is not a permanent property. It should be checked annually and also before particular stresses since the built-in sealing elements are subject to a natural ageing process and thereby decrease in their function and in daily use. External impacts can also influence water resistance. The pressure specified on your watch reflects the test pressure and must not be misunderstood as an indication of possible immersion depth.

Water resistance up to 3 bar: These Bruno Söhnle watches have been tested up to the stated atmospheric pressure of 3 bar and are protected against surface contact with water. Immersion in water should be avoided. Heavy perspiration can also impair water resistance. The 3 bar specification is not recommended for swimming and other types of water sports.

BRUNO SÖHNLE UHRENATELIER

GLASHÜTTEISA

Water resistance up to 5 bar: These Bruno Söhnle watches have been tested up to the stated atmospheric pressure of 5 bar. The glass and seals will withstand this pressure. This watch may be worn for swimming. In order to ensure lasting water resistance, have your watch checked and inspected annually.

Water resistance up to 10 bar: These Bruno Söhnle watches have been tested up to the stated atmospheric pressure of 10 bar and are the ideal partner for all types of water sports except diving. In the case of intensive use or heavy perspiration, it is very important to have an inspection performed annually.

GENERAL INFORMATION

Avoid high temperatures Do not leave your watch in direct sunlight or in very warm or cold locations for a long period. This can lead to condensation and substantial differences in timekeeping.

Avoid strong impacts This watch will withstand normal impacts that occur during play or sporting activities. Avoid dropping your watch on the ground or exposing it to other excessive impacts. In particular, impacts on the crown should be avoided.

Avoid strong magnetic fields Keep your watch away from the immediate reach of strong magnetic fields. The operation of your watch will generally not be influenced by the magnetic fields of household, television or stereo devices.

BRUNO SÖHNLE UHRENATELIER GLASHÜTTEISA

Avoid chemicals, solvents and gases Do not wear your watch while using strong chemicals, solvents or harmful gases. If your watch comes into contact with these materials, degradation of the quality or damage to the casing or its seals, the watch strap or other components of the watch could occur.

Keep your watch clean Wipe off with a soft clean cloth any trace of water and area of dampness on the casing, glass or strap. Any dirt on the casing or the watch strap could cause a skin rash. A watch strap will be soiled by deposits of sweat and dust. A stainless or gold-plated strap can corrode if it is not cleaned over a longer period of time.

GENERAL INFORMATION

Periodic inspection In order to maintain the watch in trouble-free functioning condition over many years, we recommend that you have the watch inspected every 3 years.

We wish you a lot of enjoyment with your Bruno Söhnle watch.

Your Bruno Söhnle Team - Glashütte

BRUNO SÖHNLE UHRENATELIER

GLASHÜTTEISA

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

SELLITA SW 200 BASIC MOVEMENT REFINED BRUNO SÖHNLE BS 175 MOVEMENT

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

Sellita SW 200 basic movement | Refined Bruno Söhnle BS 175 movement

17 1 2 3

Please note:

The crown and/or the date display may possibly be in another position depending on the model.

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

Sellita SW 200 basic movement | Refined Bruno Söhnle BS 175 movement

Winding the watch

■Unscrew the crown counter-clockwise

(only with watches that are provided with a screw-down crown).

■The watch must be wound clockwise by hand approx. 30 rotations before initial operation so that the main spring has sufficient tension (position 1).

Setting the time

■Pull out the crown completely (position 3); the second hand stops (to allow setting to the exact second)

■Turn the crown to set the correct time

■Push the crown back in (position 1), and the watch will begin to run again

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

Sellita SW 200 basic movement | Refined Bruno Söhnle BS 175 movement

Setting the date with the quick-set function

■Pull crown out to the first click stop (position 2)
■Turn the crown to set the correct date
■Press the crown in (position 1)

■ Attention: In the period from 10 p.m. to 3 a.m., the quick-set date function cannot be carried out since the appropriate ratchet wheel is being used for the regular changing of the date.

BRUNO SÖHNLE UHRENATELIER

GLASHÜTTEISA

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

SELLITA SW 240 BASIC MOVEMENT REFINED BRUNO SÖHNLE BS 297 MOVEMENT

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

Sellita SW 240 basic movement | Refined Bruno Söhnle BS 297 movement

17 1 2 3

Please note:

The crown and/or the date display may possibly be in another position depending on the model.

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

Sellita SW 240 basic movement | Refined Bruno Söhnle BS 297 movement

Winding the watch

■Unscrew the crown counter-clockwise (only with watches that are provided with a screw-down crown)
■The watch must be wound clockwise by hand approx. 30 rotations before initial operation so that the main spring has sufficient tension (position 1)

Setting the time

■Pull out the crown completely (position 3); the second hand stops (to allow setting to the exact second)
■Turn the crown to set the correct time
■Push the crown back in (position 1), and the watch will begin to run again

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

Sellita SW 240 basic movement | Refined Bruno Söhnle BS 297 movement

Setting the date with with the quick-set function

■Pull the crown out to the first click stop (position 2)
■The day of the week can be set by turning the crown counter-clockwise The day of the week must be completely visible in the window
■The date can be set by turning the crown counter-clockwise
■The watch starts by pressing in the crown Screw in the crown again hand-tight (in the case of screw-down crowns)

■ Attention: In the period from 10 p.m. to 3 a.m., the quick-set date and day of the week function should not be carried out since the appropriate ratchet wheel is being used for the regular changing of the date.

BRUNO SÖHNLE UHRENATELIER

GLASHÜTTEISA

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

SELLITA SW 260 BASIC MOVEMENT REFINED BRUNO SÖHNLE BS 212 MOVEMENT

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

Sellita SW 260 basic movement | Refined Bruno Söhnle BS 212 movement

17 1 2 3

Please note:

The crown and/or the date display may possibly be in another position depending on the model.

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

Sellita SW 260 basic movement | Refined Bruno Söhnle BS 212 movement

Winding the watch

■Unscrew the crown counter-clockwise
(only with watches that are provided with a screw-down crown)
■The watch must be wound clockwise by hand approx. 30 rotations before initial operation so that the main spring has sufficient tension (position 1)

Setting the time

■Pull out crown completely (position 3); the second hand stops (to allow setting to the exact second)
■Turn the crown to set the correct time
■Push the crown back in (position 1), and the watch will begin to run again

OPERATING INSTRUCTIONS AUTOMATIC MOVEMENT

Sellita SW 260 basic movement | Refined Bruno Söhnle BS 212 movement

Setting the date with the quick-set function

■Pull the crown out to the first click stop (position 2)
■Turn the crown to set the correct date
■Press the crown in (position 1)

■ Attention: In the period from 10 p.m. to 3 a.m., the quick-set date function cannot be carried out since the appropriate ratchet wheel is being used for the regular changing of the date.

Close-up of mechanical gears and interlocking components, no visible text or symbols

Bruno Söhnle GmbH