MH201 - Styler Manta - Free user manual and instructions

USER MANUAL MH201 Manta

Abstract black-and-white circular logo with interlocking curved shapes (no text or symbols)

MANTA

Hair Straightener

MH201

Black and white image of a pair-of-press iron curling iron (no text or symbols visible)

Instrukcja obsługi

User's Manual

Instrukcja obsługi

UŻYCIE 3

WSKAZÓWKI 4

CZYSZCZENIE I KONSERWACJA ..... 4

ŚRODKI OSTROŻNOŚCI....5

SPECYFIKACJA....6

Manual

USAGE 8

HINTS AND TIPS....9

CLEANING AND MAINTENANCE....9

SAFETY CAUTIONS....10

SPECIFICATION....11

1 2 3 4 1-6 2- 3- 4-1

1- Obudowa

2- Włącznik

Diagram of a hair iron with labeled parts including band, roller, and weight bands

1- Housing

2- ON-OFF switch

3- Power indicator light

4- Ceramic plates

Usage

IMPORTANT!

THIS PRODUCT REACHES HIGHTEMPERATURES

1. Plug into a suitable mains supply when the straightener is ready for use. There is no need to preheat the straightener. Always place straightener on a solid, flat, heat resistant surface. Do not place straightener on any soft or uneven surfaces such as carpets, bedding or rugs and never cover. The plates reach a high temperature quickly.

2. Add heat protection spray throughout hair for protection, shine and a long lasting style.

3. Turn the straightener on, the power on indicator light will illuminate, and the plates will rapidly heat up and be ready for use within seconds.

4. Separate a section of hair approximately 5cm in width and smooth it out with a brush.

5. Place the chosen section of hair between the plates of the straightener and close the plates. Take care not to touch the very hot plates.

6. Hold the straightener in place until the hair is fully heated this will be almost instant. When holding the straightener always ensure fingertips are placed away from the hot plates.

7. Once the hair is heated, holding the hair taut, carefully slide the plates along the selected section of hair, in one smooth movement all the way down to the ends.

8. Keep the strands of hair smooth whilst you work to avoid ridges.

Hints and Tips

Hair should be completely dry to achieve best results. Keep the strands of hair smooth whilst you work, to avoid ridges halfway down. Use the LOW Setting for fine hair and everyday straightening. Use the HIGH Setting for thick and difficult hair. As with all straighteners that reach salon high temperatures, do not use frequently to avoid damaging your hair.

Cleaning and maintenance

1. Unplug the straightener from the supply socket and allow to cool fully before attempting to clean. This appliance reaches very high temperatures when switched on and will take time to cool down fully. Whilst cooling, place on a heat resistant surface, away from children and in a safe place. Never cover.
2. The casing may then be cleaned by wiping over with a soft damp cloth (moistened with water only). Dry thoroughly with a soft towel before re-using.
3. Do not use harsh abrasives or cleaners.
4. Do not immerse the unit, cord set or plug in water or any other liquid.

Safety Cautions

• Do not submerge any part of the straightener, cord or plug in water or other liquids. Do not use near bath tubs, showers, swimming pools or other bodies of water.
• When using, do not touch the heating elements of device, in particular ceramic plates. Hold these elements away from the scalp, face, neck and hands.
• Keep the device out of the reach of children and people with mental nature. Keep children and people suffering from mental illness to use straighteners unattended in-different people.
• Damaged power cable must be replaced by the manufacturer, appointed by the technician or other person having similar powers, which will eliminate the risk of an accident.
• Do not use the hot plates for more than a few seconds, which can lead to hair damage.
• Never cover the devices (eg. Towel). Straightener not place on surfaces affected by heat. Keep out of reach of children.
• Dropping the straightener on a hard surface can cause permanent damage to the ceramic plates.
• When you turn off the hair straightener appliance to cool the reach of children. Straightener left on a heat resistant surface.

NOTE!

Product design and Technical parameters may be change without notice. This mainly concerns parameters technical, software and user manual present. User's Manual is a general orientation on service product.

Manufacturer and distributor do not assume any responsibility as compensation for any inaccuracies errors in the descriptions appearing in this user manual.

Specification

Model	MH201
Nominal woltage 220-240V~50/60Hz
Power	30-35 W
Max Temperature ceramic plates	200 °C

INFORMATION ON THE CORRECT PROCEEDINGS IN THE CASE OF DISPOSING OF ELECTRONIC AND ELECTRIC DEVICE

The crossed dust bin symbol placed on our products indicates that the redundant electric or electronic products should not be disposed together with household waste.

Appropriate action in the event of having to dispose of equipment or components, or recycle them involves bringing the machine to a collection point where it will be accepted free of charge. In some countries you may dispose of the product when purchasing a new device.

The correct disposal of this product makes it possible to preserve the earth's natural resources for longer and prevents the degradation of the environment. Information about collection points is issued by local authorities. Incorrect disposal of waste is subject to penalties provided for in the law of the relevant area.

MANTA

RoHS

① C E

CUSTOMER SERVICE

tel: [phone] or e-mail: [e-mail]

FROM MONDAY TO FRIDAY, IN HOURS: 9.00-17.00

The manufacturer reserves the right to introduce changes