HIVE Pods 2 - Earphones Niceboy - Free user manual and instructions

Product Type	True Wireless Stereo (TWS) Earbuds
Model	Niceboy HIVE Pods 2
Bluetooth Version	5.0
Supported Profiles	HFP, HSP, A2DP, AVRCP
Frequency Range	20 Hz - 20 kHz
Sensitivity	94 dB ± 3 dB
Speaker Driver	6 mm
Transmission Range	Up to 10 m
Water Resistance	IPX5
Playback Time	Up to 6.5 hours (earbuds)
Earbud Battery Capacity	70 mAh each
Charging Case Battery Capacity	500 mAh
Charging Input	Micro USB-B
Controls	Multifunction button on each earbud (play/pause, answer/end call, volume, track skip, power on/off)
Pairing	Automatic on removal from case; manual via Bluetooth settings
Factory Reset	Hold both buttons in case until red flash three times
What's in the Box	Earbuds, charging case, extra ear tips, Micro USB cable, manual
Safety	Do not expose to extreme temperatures or moisture; avoid excessive volume
Disposal	Do not dispose with household waste; recycle at designated collection points

Frequently Asked Questions - HIVE Pods 2 Niceboy

How do I pair the Niceboy HIVE Pods 2 with my phone?

Take both earbuds out of the case and press and hold the multifunction button on each until the LED flashes green and red. Then go to Bluetooth settings on your device and select 'Niceboy HIVE pods 2'.

How do I turn the earbuds on and off?

They turn on automatically when removed from the charging case. To turn off manually, press and hold both buttons for about 6 seconds, or place them back in the case.

How do I control volume and tracks?

Double-press the right earbud to increase volume, double-press the left to decrease. Long-press the right for next track, long-press the left for previous track.

What is the battery life and how do I charge?

The earbuds last up to 6.5 hours on a single charge. The case provides additional charges (500mAh). To charge the case, connect a Micro USB cable to the port; the LED flashes during charging and stops when full.

Are the Niceboy HIVE Pods 2 waterproof?

They have an IPX5 rating, meaning they are resistant to water splashes and sweat, but not fully waterproof. Do not submerge.

How do I reset the earbuds to factory settings?

Place both earbuds in the charging case and press and hold the multifunction buttons until the LED flashes red three times. They will then be reset.

Why is one earbud not connecting?

Try resetting the earbuds. If that doesn't work, ensure both earbuds are charged and that you have removed any protective stickers on the charging pins.

How do I answer a call or play/pause music?

A single press of either multifunction button will play or pause music, or answer or end a call.

What devices are compatible?

Any Bluetooth-enabled device (smartphone, tablet, computer) with Bluetooth 5.0 or earlier is compatible.

How do I replace the ear tips?

Gently pull off the old ear tips and push the new ones onto the nozzle. The package includes spare ear tips of different sizes for a better fit.

USER MANUAL HIVE Pods 2 Niceboy

Simple line drawing of a mechanical or electrical component with two circular ends and a labeled connection point (no text or symbols)

Line drawing of a closed electronic device with grid pattern and labeled component (no text or symbols beyond label)

Technical line drawing of a mechanical component with a numbered label (5) and grid background, no readable text or symbols.

PRVNÍ SPUŠTĚNÍ A PÁROVÁNÍ

Symbol of a trash bin with crossed lines and a solid black rectangle below (no text or labels)

Simple line drawing of a mechanical or electrical component with two circular ends and a labeled connection point (no text or symbols)

Line drawing of a closed electronic device with grid pattern and labeled component (no text or symbols beyond label)

Technical line drawing of a mechanical component with grid pattern and labeled part (5), no readable text or symbols beyond the number marker.

PRVÉ SPUSTENIE A PÁROVANIE

Symbol of a trash bin with no text or labels, including a crossed-out box and a solid black rectangle below (no readable text or symbols)

Niceboy HIVE pods 2 headphones

Charging box

Backup earphone attachment

Micro USB-B cable

Manual

PRODUCT DESCRIPTION

1. Multifunctional button
2. LED diode
3. Charger input
4. LED charging indicator
5. Charging micro USB-B port

Simple line drawing of a mechanical or electrical component with two circular ends and a labeled connection point (no text or symbols)

Line drawing of a closed electronic device with grid pattern and labeled component (no text or symbols beyond label)

Technical line drawing of a mechanical component with a numbered label (5) and grid background, no readable text or symbols.

INITIAL START UP AND PAIRING

1. Take both headphones out of the charging box and take off the labels protecting the charging pins (3) on the headphones.
2. Power on the headphones with one long press of the multifunctional button (3) on both headphones.
3. After the LED diode (2) begins to flash both green and red, the headphones are prepared to connect to a Bluetooth device.
4. Open the Bluetooth settings on your own device and search for "Niceboy HIVE pods 2" on the list of available devices.
5. Once the pairing is successful it will be announced by an audible queue and the LED diode (2) will flash green for a long interval.

Just take the headphones out of the box to connect them again to a previously connected device. The headphones will automatically power on and connect to the device.

POWERING ON AND OFF:

Just take the headphones out of the charging box to power them on or manually power on the headphones with one long press of both multifunctional buttons.

To power the headphones off, just place them back in their charging box. They will power off themselves and disconnect from your device. The diode (2) will shine red once the headphones have been correctly stored in their box. If the headphones are 100% charged, the diode will stop shining. The headphones can also be powered off with one long press of both multifunctional buttons lasting about 6 seconds.

MULTIFUNCTIONAL BUTTON - BASIC CONTROLS

One press of any - play / pause, answer / end call Press the right button twice to increase the volume by one level Press the left button twice to decrease the volume by one level Long press of right button - next track, reject call Long press left button - previous track, reject call

CHARGING:

To charge the charging box itself, connect the charging cable to the USB port (5). The diode (4) flashes when charging and stops flashing once full battery has been reached.

FACTORY SETTINGS

Place both headphones in the box and hold down both of their multifunctional buttons until the diode flashes red three times. Once you take the headphones out of the box, they will have been restored to their factory settings.

SPECIFICATIONS

BT: 5.0 (2,4 GHz)

Radio frequency power: ≤ 2,5mW

Supported BT profiles: HFP,HSP,A2DP,AVRCP

Degree of protection: IPX5

Transmission range: 10m

Frequency: 20Hz-20kHz

Sensitivity: 94db ± 3dB

Speaker: 6mm

Playback time: up to 6.5 hours

Headphone battery capacity: 70mAh

Charging box battery capacity: 500mAh

SAFETY INFORMATION

Listening to music at excessive volume can damage your hearing. Do not subject the equipment to fluids and moisture. Do not expose the device to excessively high/low temperatures, and do not attempt to disassemble it. Protect the device from sharp objects and falls from height. Batteries - Improper handling (prolonged charging, short circuit, breakage by other objects, etc.) may result in fire, overheating or battery leakage.

Information on all frequency bands in which the radio equipment operates and intentionally transmits radio waves as well as the maximum radio frequency power transmitted in the frequency band in which the radio equipment is operated is included in the instructions and safety information.

The manual may be downloaded in its electronic form at www.niceboy.eu under the support section. RTB Media s.r.o. hereby declares that the type of radio equipment NICEBOY HIVE PODS 2 complies with Directives 2014/53 / EU, 2014/30 / EU, 2014/35 / EU, and 2011/65 / EU. The full content of EU Declaration of Conformity is available on the following websites: https://niceboy.eu/cs/podpora/prohlaseni-o-shode-mM38CtmYvX693IHwvu4CWpk3vjGrvnC

USER INFORMATION FOR DISPOSING ELECTRICAL AND ELECTRONIC DEVICES (HOME USE)

Symbol of a trash bin with crossed lines and a solid black rectangle below (no text or labels)

This symbol located on a product or in the product's original documentation means that the used electrical or electronic products may not be disposed together with the communal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any potential negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or nearest collection site. According to national regulations, fines may also be given out to anyone who disposes of this type of waste incorrectly.

User information for disposing electrical and electronic devices.

(Business and corporate use)

In order to correctly dispose of electrical and electronic devices for business and corporate use, refer to the product's manufacturer or importer. They will provide you with information regarding all disposal methods and, according to the date stated on the electrical or electronic device on the market, they will tell you who is responsible for financing the disposal of this electrical or electronic device. Information regarding disposal processes in other countries outside the EU. The symbol displayed above is only valid for countries within the European Union. For the correct disposal of electrical and electronic devices, request the relevant information from your local authorities or the device seller.

DE

LIEFERUMFANG:

Ohrhörer Niceboy HIVE Pods 2

Ladebox

Ersatz-Ohrstöpsel

Micro-USB-B Kabel

Anleitung

PRODUKTBESCHREIBUNG

Simple line drawing of a mechanical component with two circular parts and a labeled section (no text or symbols)

Line drawing of a 3D object with grid pattern and labeled point (4), no text or symbols present

Technical line drawing of a mechanical component with a numbered label (5) and grid background, no readable text or symbols.

Symbol of a trash bin with no text or numbers, featuring crossed and unshaded regions (no readable text)

Simple line drawing of a mechanical component with no text or symbols

Line drawing of a 3D object with grid pattern and labeled point (4), no text or symbols present

Technical line drawing of a mechanical component with grid pattern and labeled part (5), no readable text or symbols beyond the label.

Symbol of a trash bin with no text or labels, including a crossed-out box and a solid black rectangle below (no readable text or symbols)

Simple line drawing of a mechanical component with two circular parts and a labeled section (no text or symbols)

Line drawing of a 3D object with grid pattern and labeled point (4), no text or symbols present

Technical line drawing of a mechanical component with a numbered label (5) and grid background, no readable text or symbols.

PRVO POKRETANJE I UPARIVANJE

1. Izvadite obje slušalice iz kutije za punjenje i skinite naljepnice koje štite priključke (3) na slušalicama.
2. Uključite slušalice dugim pritiskanjem multifunkcijskog gumba (1) na obje slušalicama.
3. Nakon što LED dioda (2) počne treperiti naizmjenično zeleno i crveno, slušalice su spremne za priključenje na Bluetooth uređaj.
4. Na svom uređaju otvorite podešavanje Bluetooth i na spisku dostupnih uređaja pronađite „Niceboy HIVE pods 2“.
5. Uspješno uparivanje najavljuje akustičko upozorenje i LED dioda treperi zeleno u dugom intervalu.

Symbol of a trash bin with no text or labels, including a crossed-out box and a solid black rectangle below (no readable text or symbols)

Simbol naveden na proizvodu ili u popratnoj dokumentaciji znači da je zabranjeno odlagati električne ili elektroničke proizvode zajedno s komunalnim otpadom. Pobrinite se za pravilnu likvidaciju otpada: dotrajali proizvod predajte besplatno u ovlašteni centar za skupljanje otpada. Propisnom likvidacijom dotrajalog proizvoda ćete doprinijeti očuvanju skupocjenih prirodnih izvora te prevenciji negativnih utjecaja na okoliš i ljudsko zdravlje zbog

nepravilne likvidacije otpada. Za više informacija obratite se nadležnom lokalnom uredu ili mjestu zbrinjavanja. Nepravilno zbrinjavanje ove vrste otpada kažnjava se sukladno nacionalnim propisima.

Informacije za korisnika o načinu zbrinjavanja električnih i elektronskih uređaja (Poslovna uporaba)

Vezano za pravilno zbrinjavanje dotrajale električne/elektronske opreme za poslovnu upotrebu i upotrebu u tvorničkim pogonima obratite se proizvođaču ili uvozniku ovog proizvoda. Proizvođač će Vam pružiti informacije o načinu zbrinjavanja proizvoda i obavijestit će vas o tome tko je dužan osigurati zbrinjavanje ovog električnog uređaja ovisno o datumu uvođenja proizvoda na tržište. Informacije o zbrinjavanju dotrajalog proizvoda u ostalim zemljama (izvan EU). Gore navedeni simbol važi samo u Europskoj uniji. Za više informacija o pravilnom zbrinjavanju električnih i elektronskih uređaja se obratite prodavatelju ili dobavljaču.

PL

ZAWARTOŚĆ OPAKOWANIA:

Słuchawki Niceboy HIVE pods 2

Etui ładujące

Line drawing of a 3D object with grid pattern and labeled point (4), no text or symbols present

Simple line drawing of a mechanical component with two circular parts and a labeled section (no text or symbols)

Technical line drawing of a mechanical component with grid pattern and labeled part (5), no readable text or symbols beyond the number marker.

PIERWSZE WŁĄCZENIE I SPAROWANIE

Symbol of a trash bin with no text or labels, including a crossed-out box and a solid black rectangle below (no readable text or symbols)

Simple line drawing of a mechanical component with two circular ends and a labeled section (no text or symbols)

Line drawing of a 3D object with grid pattern and labeled point (4), no text or symbols present

Technical line drawing of a mechanical component with a numbered label (5) and grid background, no readable text or symbols.

PRVI ZAGON IN ZDRUŽEVANJE

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

Castile Niceboy HIVE pods 2

Cutia de alimentare

Simple line drawing of a mechanical component with two circular parts and a labeled section (no text or symbols)

Line drawing of a 3D object with grid pattern and labeled point (4), no text or symbols present

Technical line drawing of a mechanical component with a numbered label (5) and grid background, no readable text or symbols.

PRIMA PORNIRE SI SINCRONIZAREA

Symbol of a trash bin with no text or numbers, featuring crossed and unmarked lines (no readable text)

Simple line drawing of a mechanical component with two circular parts and a numbered label (3) pointing to one part.

Technical line drawings of two 3D object views, one with internal grid lines and labeled parts (4 and 5), no text or symbols present.

Simple line drawing of a trash bin with crossed lines indicating no waste or discharge (no text or symbols)

Simple line drawing of a mechanical or electrical component with two circular ends and a labeled connection point (no text or symbols)

Line drawing of a closed electronic device with grid pattern and labeled component (no text or symbols beyond label)

Technical line drawing of a mechanical component with grid pattern and labeled part (5), no readable text or symbols beyond the number marker.

Symbol of a trash bin with crossed lines indicating no waste, and a solid black rectangle below (no text or labels)