SMC 4300B - Hi-Fi SENCOR - Free user manual and instructions

Product Type	CD Micro System
Brand	Sencor
Model	SMC 4300B
Power Supply	AC 110-240 V, 50/60 Hz
Power Consumption	20 W
Protection Class	Class II
Disc Playback	CD, CD-R, CD-RW
Radio Tuner	FM (87.5 – 108 MHz)
Bluetooth	Yes (wireless audio streaming)
USB Playback	Yes (MP3 format)
Audio Input	3.5 mm AUX
Headphone Output	3.5 mm jack
Remote Control	Included
Display	LED with clock
Dimensions (W x H x D)	Approx. 200 x 250 x 120 mm
Weight	Approx. 3.5 kg
Color	Black
Antenna	FM wire antenna
Cleaning	Wipe with a soft, dry cloth. Do not use liquids.
Safety	Do not expose to moisture. Use only specified power supply.

Frequently Asked Questions - SMC 4300B SENCOR

How do I set the clock on the Sencor SMC 4300B?

Press and hold the Clock button on the remote or front panel. When the display flashes, use the +/- buttons to adjust hours, then minutes. Press Clock again to confirm.

Can I play MP3 files from a USB drive?

Yes, connect a USB drive with MP3 files to the USB port. Use the Source button to select USB mode. The system will automatically start playback.

How do I connect my phone via Bluetooth?

Press the Source button until BT appears on the display. Enable Bluetooth on your phone and select SMC 4300B from the list. Once paired, audio will stream wirelessly.

Why does the CD not play?

Ensure the disc is inserted with the label facing up. Check that the disc is clean and free from scratches. If the issue persists, try a standard CD audio disc.

How do I improve FM radio reception?

Extend the FM wire antenna fully and adjust its position. Keep the antenna away from metal objects and other electronic devices. If reception remains poor, try moving the system to a different location.

Can I use headphones with this system?

Yes, plug headphones with a 3.5 mm jack into the headphone output on the front panel. The speakers will automatically mute.

How do I reset the system to factory settings?

Press and hold the Stop button for 5 seconds while the unit is on. The display will show RESET and then restart. All settings will return to default.

What should I do if the remote control stops working?

Replace the batteries (CR2025) with new ones. Ensure the remote is aimed at the sensor on the front panel within 5 meters. Remove any obstacles between them.

Is it safe to leave the system on standby?

Yes, standby mode consumes very little power (less than 1 W). However, to save energy and for safety, unplug the system if not used for extended periods.

Can I connect an external device via AUX?

Yes, use a 3.5 mm audio cable to connect your device to the AUX input. Select AUX mode using the Source button. Adjust volume on both devices as needed.

USER MANUAL SMC 4300B SENCOR

Declaration of Conformity

Product/ brand: CD MICRO SYSTEM/ SENCOR

Type/ model: SMC 4300BR

AC: 110-240V\~, 50/60Hz, 20W, CLASS II

Manufacturer: FAST ČR, a.s.

Černokostelecká 2111, 100 00 Praha 10, Czech Republic

VAT no: CZ26726548

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

Directive RED 2014/53/EU

Directive RoHS 2011/65/EU

Directive ErP 2009/125/ES

The relevant harmonised standards and the other technical specifications :

EN 60065-1:2014

EN 301 489-01 V2.1.1

EN 301 489-17 V 3.1.1

EN 300 328 V 2.1.1

EN 303 345 V 1.1.7

EN 62479:2010

EN 55032:2015

EN 55020:2007+A11

EN 61000-3-2:2014

EN 61000-3-3:2013

CE

Place of issuance: Prague

Chairman of the Board

Name: Ing. Zdeněk Pech

Date of issuance: 1.8.2017

Signature: