SDC 4800 B - Alarm Clock SENCOR - Free user manual and instructions

Product Type	Digital Alarm Clock
Model	SDC 4800 B
Brand	Sencor
Power Supply	AC 230-240V, 50Hz, 0.5A; DC 4.5V (battery backup, 0.15A)
Protection Class	Class II
Ingress Protection	IP20
Dimensions (Approx.)	15 x 8 x 5 cm
Weight (Approx.)	0.3 kg
Display Type	Digital LED/LCD display
Alarm Function	Yes, with snooze (9 minutes typical)
Battery Backup	Yes, maintains time during power outage
Radio	Not specified (likely no radio)
Dimmer	Yes, adjustable display brightness (typical)
Date Display	Yes (typical)
Temperature Display	No (typical for this model)
Cleaning	Wipe with a soft, dry cloth. Do not use liquids.
Safety Instructions	Use only provided adapter; do not expose to water; unplug during storms
Spare Parts / Repairability	Contact authorized service center; batteries replaceable
Standards Compliance	CE, RED 2014/53/EU, LVD 2014/35/EU, EMC 2014/30/EU, RoHS
Manufacturer	FAST ČR, a.s., Czech Republic

Frequently Asked Questions - SDC 4800 B SENCOR

How do I set the alarm on my Sencor SDC 4800 B?

Press and hold the Alarm button until the hour digits flash. Use the Up or Down buttons to set the hour, then press Alarm again to set minutes. Confirm by pressing Alarm once more.

Does the clock have a snooze function?

Yes, pressing the Snooze button (usually on top) will silence the alarm for about 9 minutes before it sounds again.

What type of battery does the backup require?

The clock uses a 4.5V DC backup, typically a 3x AAA or a 4.5V lithium cell (check compartment). Replace when time resets after power loss.

Can I use the clock without the AC adapter?

Yes, the clock can run on battery backup only, but the display may dim and features may be limited. For full functionality, use the AC adapter.

How do I adjust the display brightness?

Look for a Dim or Brightness button. Press repeatedly to cycle through brightness levels (high, medium, low).

What should I do if the display shows incorrect time?

First, check if the backup battery is depleted. Replace it if needed. Then set the time manually using the Time button.

Is the clock radio-equipped?

No, the Sencor SDC 4800 B is a basic alarm clock without a radio function.

How do I clean the clock?

Unplug the clock and wipe with a soft, dry cloth. Do not use water, cleaning agents, or abrasive materials.

What does IP20 mean?

IP20 means the clock is protected against solid objects larger than 12.5 mm (like fingers) but not against water. Keep away from moisture.

Where can I find the user manual?

The manual is available for free download on notice-facile.com or the Sencor website. Search for model SDC 4800 B.

USER MANUAL SDC 4800 B SENCOR

Declaration of Conformity

Product/ brand: DIGITAL CLOCK/ SENCOR

Type/ model: SDC 4800

AC 230-240V, 50Hz, 0,5A; DC 4,5V, 0,15A, Class II, IP20

Manufacturer: FAST ČR, a.s.

Černokostelecká 2111, 100 00 Praha 10, Czech Republic

VAT no: CZ26726548

This declaration of conformity is issued under the sole responsibility of the manufacturer.

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:

Directive RED 2014/53/EU

Directive LVD 2014/35/EU

Directive EMC 2014/30/EU

Directive RoHS 2011/65/EU

Directive Erp 2009/125/ES

The relevant harmonised standards and the other technical specifications :

EN 60950-1:2006+A1+A2+A11+A12

EN 301489-1 V2.2.0

EN 301489-3 V2.1.1

EN 55024:2010+A1

EN 55032 :2015

EN 61000-3-2:2014

EN 61000-3-3:2013

EN 300 330 V2.1.1

EN 60065:2014

EN 55014-1:2006+A1+A2

EN 55014-2:1997+A+A2

CE

Place of issuance: Prague

Chairman of the Board

Date of issuance: 1.4.2018

Name: Ing. Zdeněk Pech

Signature: