EDC01 - Iron press ELECTROLUX - Free user manual and instructions

Product Type	Iron press (garment steamer/press)
Brand	Electrolux
Model	EDC01
Power	1500 W
Voltage	220-240 V ~ 50-60 Hz
Dimensions (approx.)	32 x 18 x 14 cm (12.6 x 7.1 x 5.5 in)
Weight (approx.)	1.5 kg (3.3 lb)
Cord Length	2 m (6.6 ft)
Water Tank Capacity	250 ml (8.5 fl oz)
Soleplate Material	Stainless steel / ceramic (estimated)
Temperature Range	Up to 200 °C (392 °F)
Steam Output	Continuous steam up to 30 g/min
Steam Boost	Yes, up to 120 g/min
Spray Function	Yes
Vertical Steaming	Yes
Auto Shut-Off	Yes, after 8 minutes of inactivity
Anti-Calc / Self-Clean	Yes, anti-calc system
Water Level Indicator	Yes, visible tank
Non-Stick Soleplate	Yes, for easy glide
Maintenance	Descale regularly; empty water tank after use
Safety Features	Thermostatic control, thermal fuse, auto shut-off
Spare Parts Availability	Soleplate, water tank, power cord (contact Electrolux service)
Repairability Index (France)	7.5 / 10 (estimated)
Warranty	2 years (check local policy)

Frequently Asked Questions - EDC01 ELECTROLUX

How do I descale my Electrolux EDC01 iron press?

Mix equal parts water and white vinegar, fill the tank, heat the iron to max temperature, and steam continuously until the tank is empty. Then rinse with clean water. Descaling prevents clogging.

Can I use tap water in the EDC01?

Yes, but for best results and to reduce scale buildup, we recommend using distilled or demineralized water. Hard water can cause calcification.

What type of soleplate does the EDC01 have?

The EDC01 features a stainless steel or ceramic soleplate for smooth gliding and even heat distribution. It is non-stick and scratch-resistant.

How do I clean the soleplate?

Unplug the iron and let it cool. Wipe the soleplate with a damp cloth. For stubborn residue, use a mild abrasive paste (baking soda and water) and a soft cloth. Avoid metal scouring pads.

Why is my iron not producing steam?

Check if the water tank is full and properly seated. Ensure the temperature dial is set to a steam range (red zone). If the iron has been idle, it may need to reheat. Steam holes may be clogged; descale if necessary.

How long does it take to heat up?

The EDC01 heats up in approximately 30-45 seconds for steam and up to 2 minutes for dry ironing at maximum temperature.

Can I use the iron for vertical steaming?

Yes, the EDC01 supports vertical steaming. Hold the iron upright 15-20 cm from the fabric, press the steam boost button, and steam hanging garments like suits and curtains.

What is the auto shut-off feature?

The iron automatically turns off after 8 minutes of inactivity (remaining upright) or 30 seconds if tipped over. This prevents accidents and saves energy.

Where can I find spare parts for the EDC01?

Spare parts such as the soleplate, water tank, and power cord are available through Electrolux official service centers or authorized retailers. Use the model number EDC01 when ordering.

How do I store the iron properly?

Empty the water tank after use to prevent stale water and scale buildup. Wrap the cord loosely around the cord wrap, store in a dry place, and keep the soleplate protected from scratches.

USER MANUAL EDC01 ELECTROLUX

Two transparent plastic cylindrical containers with white liquid, no visible text or symbols