EINHELL GS 4400 - Heating

GS 4400 - Heating EINHELL - Free user manual and instructions

Find the device manual for free GS 4400 EINHELL in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice EINHELL GS 4400 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeGas Space Heater
BrandEinhell
ModelGS 4400
Heating Power4.4 kW
Fuel TypePropane/Butane (LPG)
Power SupplyGas cylinder (no electricity required)
Dimensions (W x H x D)400 x 300 x 300 mm
Weight5.5 kg
Noise Level< 60 dB(A)
Safety FeaturesFlame failure device, overheat protection, tip-over switch
CertificationsCE, EN 461, 2012/46/EU
Included AccessoriesGas hose, pressure regulator
IgnitionPiezo ignition
Heat Settings2 adjustable levels
Recommended Room SizeUp to 100 m²
ColorRed and black
MaterialSteel housing
MaintenanceAnnual cleaning of burner and ventilation slots
RepairabilitySpare parts available (burner, thermocouple, etc.)

Frequently Asked Questions - GS 4400 EINHELL

What type of gas does the Einhell GS 4400 use?
The GS 4400 uses LPG (propane or butane). Use only commercial propane/butane cylinders with a suitable regulator.
How do I ignite the heater?
Turn on the gas supply, press and hold the control knob, then press the piezo igniter button repeatedly until the flame ignites. Keep holding the knob for 10-20 seconds before releasing.
What safety features does the GS 4400 have?
It includes a flame failure device that shuts off gas if the flame goes out, overheat protection, and a tip-over switch that turns off the heater if it falls.
Can I use the heater indoors?
Yes, but only in well-ventilated areas. Ensure adequate air exchange (e.g., open a window slightly). Never use in bedrooms or bathrooms.
How do I clean the heater?
Turn off and disconnect the gas cylinder. Wait until cool. Use a soft brush to clean the burner and ventilation slots. Do not use water or solvents.
What should I do if the heater won't ignite?
Check the gas cylinder is not empty and the regulator is attached correctly. Ensure the thermocouple is clean and the gas supply is on. If still not working, contact service.
How often should I replace the gas cylinder?
Replace when empty. For continuous use, a 11 kg cylinder typically lasts 20-30 hours at maximum setting, depending on usage.
Is the heater suitable for large rooms?
The GS 4400 has a heating power of 4.4 kW, suitable for rooms up to 100 m² with good insulation. For larger spaces, consider additional heating.
What spare parts are available?
Common spare parts include burner nozzle, thermocouple, piezo igniter, and gas hose. These can be ordered from Einhell service centers.
How do I store the heater when not in use?
Disconnect the gas cylinder and store it outdoors in a dry, ventilated area. Clean the heater and keep it in its original packaging if possible.

User questions about GS 4400 EINHELL

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual GS 4400 - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS 4400 by EINHELL.

USER MANUAL GS 4400 EINHELL

Noise: measured L_WA = dB(A) ; guaranteed L_WA = dB(A)

P = KW; L/∅ = cm

Notified Body:

2012/46/EU

Emission No.:

Standard references: EN 461

Subject to change without notice

Archive-File/Record: NAPR015550 Documents registrar: Landauer Josef Wiesenweg 22, D-94405 Landau/Isar

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : EINHELL

Model : GS 4400

Category : Heating