PS 1001 - Heating EINHELL - Free user manual and instructions
Find the device manual for free PS 1001 EINHELL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric fan heater |
| Brand | Einhell |
| Model | PS 1001 |
| Power | 2000 W |
| Supply Voltage | 230 V ~ 50 Hz |
| Dimensions (W × D × H) | 25 × 18 × 22 cm |
| Weight | 1.5 kg |
| Main Functions | Fan-forced heating, 2 power levels, adjustable thermostat, cool air fan |
| Safety | Overheat protection, tip-over switch (auto shut-off if knocked over), protective grille, protection class II |
| Maintenance and Cleaning | Unplug before cleaning, use a dry or slightly damp cloth, do not immerse in water, clean the air inlet grille regularly |
| Spare Parts and Repairability | Available through Einhell after-sales service: heating elements, switches, thermostats; repair recommended by a professional |
| General Information | CE certified, for indoor use only, do not cover, do not use near water |
Frequently Asked Questions - PS 1001 EINHELL
How to turn on and adjust the temperature of the PS 1001 heater?
Turn the thermostat knob to the maximum position. Select the desired power level (I or II). When the room reaches the desired temperature, turn the thermostat knob back until the heater stops. The thermostat then automatically maintains the temperature.
What to do if the device no longer heats?
Check that the thermostat is set above room temperature. Make sure the device has not tipped over (it switches off automatically). If the problem persists, unplug the device and contact after-sales service.
Can I use the heater in a bathroom?
No, this device is not designed for use in a bathroom or near water. It must be used in a dry indoor location.
How to clean the heater?
Unplug the device and let it cool down. Use a dry or slightly damp cloth to wipe the exterior surface. Clean the air inlet grille with a vacuum cleaner or soft brush to prevent dust buildup.
The device turned off by itself, is that normal?
Yes, it is normal if the overheat protection activated. This can happen if the air inlet is obstructed or the device tipped over. Let the device cool down, check for obstructions, and restart.
What is the power consumption of the PS 1001?
The maximum power is 2000 W, which corresponds to a consumption of 2 kWh per hour of operation at full power.
Can I leave the device on overnight?
It is not recommended to leave the device unattended for long periods. Turn it off when leaving the room or going to sleep.
How to avoid odors during first use?
During first use, a slight odor may be emitted due to burning off manufacturing residues. Run the device at full power for a few minutes in a well-ventilated room until the odor disappears.
Where can I find spare parts for my heater?
Spare parts (heating elements, switches, etc.) are available through Einhell after-sales service or on the brand's website. Consult the manual for the part number.
What is the minimum clearance height around the device?
Maintain a clearance of at least 50 cm in front of the device, 30 cm on the sides, and 30 cm above to avoid any risk of overheating or fire.
User questions about PS 1001 EINHELL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual PS 1001 - EINHELL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PS 1001 by EINHELL.
USER MANUAL PS 1001 EINHELL
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EINHELL
Model : PS 1001
Category : Heating