TWE-53MK2 - Headphones DENVER - Free user manual and instructions

Product Type	True Wireless Stereo Earbuds
Brand	Denver
Model	TWE-53MK2
Bluetooth Version	5.0
Bluetooth Name	TWE-53MK2 (L/R/Both Earbuds)
Standby Time	Approx. 20 hours
Music Playback Time	4 - 5 hours
Earbud Battery Capacity	3.7V 40 mAh each (L/R)
Charging Case Battery Capacity	3.7V 250 mAh
Operating Frequency Range	2402 - 2480 MHz
Maximum Output Power	8 dBm
Touch Controls	Play/Pause, Next/Previous track, Answer/End call, Reject call
Automatic Pairing	Yes, earbuds pair with each other within 5 seconds
Mono Mode	Available (L or R earbud alone)
Charging Method	Via charging case
LED Indicators	Red (charging), Blue (full charge)
Care Instructions	Charge every 6 months; avoid temperatures below 0°C or above 45°C
Regulatory Compliance	Directive 2014/53/EU
Manufacturer	DENVER ELECTRONICS A/S, Omega SA, Sorften, DK-6382 Minnrep, Denmark

Frequently Asked Questions - TWE-53MK2 DENVER

How do I pair the earbuds with my smartphone?

Take the earbuds out of the charging case to turn them on automatically, or long press the touch panels to turn on. The earbuds will pair with each other within 5 seconds. Then search for TWE-53MK2 in your smartphone's Bluetooth settings and connect.

Can I use only one earbud?

Yes, you can use either the L or R earbud alone for mono sound. Simply pair that single earbud with your smartphone.

How do I control music playback?

Touch the L or R panel once to play/pause, twice to skip to the next track, and three times to go to the previous track.

How do I answer or end a call?

Touch the L or R panel once to answer an incoming call or end a current call. Touch and hold for 2 seconds to reject an incoming call.

How do I charge the earbuds?

Place the earbuds into the charging case. They will start charging automatically. The LED glows red during charging and turns blue when fully charged.

How long does the battery last?

The earbuds provide approximately 4-5 hours of music playback. Standby time is about 20 hours. The charging case provides additional charges.

How do I maintain the earbuds?

Charge the earbuds at least once every 6 months. Store them between 0°C and 45°C. Do not use chemicals or detergents to clean them, and avoid dropping or dismantling.

What do the LED indicators mean?

During pairing, red and blue LEDs blink. Once paired with each other, one earbud shows alternating red and blue. Charging: solid red. Full charge: solid blue.

Why won't my earbuds connect?

Make sure the earbuds are charged and within Bluetooth range. If pairing fails, try resetting by placing them back in the case and taking them out again. Ensure your smartphone's Bluetooth is enabled.

What is the Bluetooth range?

The operating frequency range is 2402 - 2480 MHz with a maximum output power of 8 dBm. Typical Bluetooth range is up to 10 meters (33 feet) without obstacles.

USER MANUAL TWE-53MK2 DENVER

DENVER True Wireless Stereo Earbuds TWE-53MK2 Earphone touch panel WWW.DENVER-ELECTRONICS.COM www.facebook.com/denverelectronics Instruction Manual

EN Thank you for purchasing our true wireless earbuds with charging case. Please read this instruction manual carefully before using the earbuds. Care and Maintenance 1. Charge the earbuds at least once every 6 months. 2. Do not store the earbuds in extreme temperatures (< 0°C or >45°C). 3. Do not use chemicals or detergents to clean the earbuds. 4. Do not drop or knock your earbuds on hard surfaces. 5. Do not scrape the surface with sharp objects. 6. Do not try to dismantle the earbuds.

Usage Instructions 1. Pairing the earbuds with your smartphone Touch panel Step 1. The earbuds would turn on once they are taken out from the charging case, or long press the touch panels of both earbuds to turn on the earbuds, with voice prompt of Power on. Step 2. RED and BLUE LED would start blinking on both the earbuds. Both of the earbuds would automatically pair with each other within 5 secs. Once they are paired with each other, one of the earbuds would show a RED and BLUE LED blinking alternatively, which means they are ready to pair with your smartphone. Step 3. Now switch on Bluetooth in your smartphone to search for nearby devices and pair with the name TWE-53MK2 with voice prompt 'connected' after the pairing succeeded. Enter '000' if prompted for password. The earbuds would re-connect with smartphone automatically after pairing. Notes: The L or R earbud can be used alone to pair with your smartphone, and thus only mono sound is available.

2. During Music Playback 2.1 Touch the L or R panel ONCE to Play / Pause the track 2.2 Touch the L or R panel TWICE to skip to Next track 2.3 Touch the L or R panel THREE TIMES to skip to Prev. track 3. During Calls 3.1 Touch the L or R panel ONCE to attend the incoming call / end the call. 3.2 Touch the L or R panel for 2 seconds to reject the incoming call. 4. Charging earbuds Putting the earbuds into the charging case, and the earbuds would start charging automatically with LEDs glowing RED, and BLUE after full charge. 5. Product Parameters Model name: TWE-53MK2 Bluetooth version: 5.0 Bluetooth name: TWE-53MK2 (L/R/Both Earbuds) Standby time: Approx. 20 hours Music time: 4 - 5 hours Earbuds battery capacity: 3.7V 40 mAh x L/R Charging case battery capacity: 3.7V 250 mAh Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

EN ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S DENVER dennis-electronics.com Electric and electronic equipment and included batteries contain materials, components and substances that can be hazardous to your health and the environment, if the waste materials (discarded electric and electronic equipment and batteries) are not handled correctly. Electric and electronic equipment and batteries are marked with the crossed-out trash can symbol, as below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately. As the end user it's important that you submit your used batteries to the appropriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment. All close have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge and recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city. Hersby, Inter Sales A/S declares that the radio equipment type DENVER TWE-53MK2 is in compliance with Directive 2014/53/EU. The full test of the EU declaration of conformity is available at the following Internet address: Please enter: www.denvert-electronic.com and then click the search ICON on topline of website. While model number: tie-53mk2. Now enter product page, and net directive is found under download/other downloads. Operating Frequency Range: 2402 MHz - 2401 MHz Max Output Power: 8 dBm DENVER ELECTRONICS A/S Omega SA, Sorften DK-6382 Minnrep Denmark www.facebook.com/denverelectronics