EVF-TL1 - Photo Accessories FUJIFILM - Free user manual and instructions

Type	Viewfinder Tilt Adapter
Brand	Fujifilm
Model	EVF-TL1
Dimensions (W × H × D)	53.7 mm × 36.8 mm × 65.3 mm (excluding projections)
Weight	Approx. 160 g (5.6 oz)
Operating Temperature	-10 °C to +40 °C (+14 °F to +104 °F)
Range of Motion (Tilt)	5 steps from 0° (horizontal) to 90° (vertical)
Range of Motion (Pan)	Continuous, ±45°
Included Accessories	Hot shoe cover, connector cover, owner's manual
Safety Rating	Class II equipment (double insulation)
Compatible Cameras	Fujifilm X-series with electronic viewfinder (see camera manual for details)
Primary Function	Allows tilting and panning of the electronic viewfinder for flexible shooting angles
Installation	Attach to camera hot shoe and connect via provided connector; replace covers when not in use
Cleaning	Wipe with a dry, soft cloth; avoid solvents, oil, steam, humidity
Storage	Avoid direct sunlight, high temperatures, dust, and oily/greasy environments
Do Not Disassemble	Risk of fire, electric shock, or injury due to malfunction
Keep Out of Reach of Children	Small parts may cause injury
Transport	Replace hot shoe cover and connector cover to protect connectors

Frequently Asked Questions - EVF-TL1 FUJIFILM

What is the Fujifilm EVF-TL1 used for?

The EVF-TL1 is a tilt adapter that allows you to adjust the angle of the electronic viewfinder on compatible Fujifilm cameras, providing flexible shooting positions.

Which cameras are compatible with the EVF-TL1?

It is compatible with Fujifilm X-series cameras that support the viewfinder tilt adapter. Refer to your camera's manual for a list of compatible models.

How do I install the EVF-TL1?

Remove the hot shoe cover and connector cover from the camera. Attach the EVF-TL1 to the hot shoe and connect the provided cable to the camera's connector. Secure it firmly.

What is the range of motion for the EVF-TL1?

The viewfinder can tilt from 0° (horizontal) to 90° (vertical) in 5 steps, and pan continuously up to ±45°.

What are the dimensions and weight of the EVF-TL1?

It measures 53.7 mm × 36.8 mm × 65.3 mm (excluding projections) and weighs approximately 160 g (5.6 oz).

Can I use the EVF-TL1 in extreme temperatures?

The operating temperature range is -10 °C to +40 °C (+14 °F to +104 °F). Avoid using it outside this range to prevent damage.

How should I clean the EVF-TL1?

Clean it with a dry, soft cloth. Do not use solvents, and avoid exposure to oil, steam, or high humidity.

Is the EVF-TL1 safe to disassemble?

No, do not disassemble the product. It contains no user-serviceable parts and disassembly can cause fire, electric shock, or injury.

What accessories are included with the EVF-TL1?

The package includes the EVF-TL1 adapter, hot shoe cover (attached), connector cover (attached), and an owner's manual.

How should I store the EVF-TL1 when not in use?

Replace the hot shoe cover and connector cover to protect the connectors. Store in a cool, dry place away from direct sunlight and high temperatures.

USER MANUAL EVF-TL1 FUJIFILM

Technical illustration of a mechanical component with cylindrical parts and housing (no text or symbols)

JA EVF チルトアダプター

Thank you for your purchase of this product. Read these instructions before use and keep them in a safe place.

For information on use, see "Viewfinder Tilt Adapters" in Chapter 10 ("Peripherals and Optional Accessories") of the camera manual.

Be sure to read these notes before use

Safety Notes

After reading these safety notes, store them in a safe place

The icons shown below are used in this document to indicate the severity of the injury or damage that can result if the information indicated by the icon is ignored and the product is used incorrectly as a result.

This icon indicates that death or serious injury can result if the information is ignored.

This icon indicates that personal injury or material damage can result if the information is ignored.

The icons shown below are used to indicate the nature of the instructions which are to be observed.

Triangular icons tell you that this information requires attention ("Important").

Circular icons with a diagonal bar tell you that the action indicated is prohibited ("Prohibited").

Filled circles with an exclamation mark indicate an action that must be performed ("Required").

The symbols on the product (including the accessories) represent the following:

\~ AC

DC

Class II equipment (The construction of the product is double-insulated.)

! WARNING

Do not disassemble (do not open the case). Failure to observe this precaution can cause fire, electric shock, or injury due to product malfunction.

CAUTION

Do not use or store in locations that are exposed to oil fumes, steam, high humidity, or dust. Failure to observe this precaution can cause fire or electric shock.

Do not leave in direct sunlight or in locations subject to very high temperatures, such as in a closed vehicle on a sunny day. Failure to observe this precaution can cause fire

Keep out of the reach of small children. This product could cause injury in the bands of a child.

Cease use if the lens is damaged. Broken edges could cause injury.

Precautions for Use

Do not touch the connectors. Replace the hot shoe and connector covers for transport.

Items included with purchase

- Hot shoe cover (comes attached to the EVF-TL1) - Connector cover (comes attached to the EVF-TL1) - Owner's Manual (this manual)

Specifications

Operating temperature –		10 °C to +40 °C/+14 °F to +104 °F
Dimensions (W × H × D)		53.7 mm × 36.8 mm × 65.3 mm/2.1 in. × 1.4 in. × 2.6 in., excluding projections
Weight Approx.:		160 g/5.6 oz.
Range of motion	Tilt 5 steps from 0° (horizontal) to 90° (vertical)
	Pan Continuous, ±45°

Technical line drawing of a mechanical component with cylindrical parts (no text or symbols)

ZHS EVF翻折适配器