Fill & Go - Bouteille à boisson BRITA - Free user manual and instructions

Product Type	Water Bottle
Brand	BRITA
Model	Fill & Go
Filter Type	MicroDisc
Filtration Capacity	150 liters per MicroDisc
Filter Replacement Interval	Every 4 weeks
Bottle Material	BPA-free plastic
Dishwasher Safe	Bottle only, remove MicroDisc
Hand Wash	MicroDisc and bottle lid
Water Temperature Range	4 °C to 40 °C (cold tap water only)
Water Source	Municipally treated cold tap water
Intended Use	Filtration of drinking water
Storage	Disassemble and store dry when not in use
Certification	WQA certified against NSF/ANSI Standard 42
Model Numbers (Examples)	1016790 (Vital pink), 1017617 (Vital blue), 1017609 (Vital lime), 1017601 (Vital lime), 1017... (Vital purple)
Replacement Filter Source	www.brita.net

Frequently Asked Questions - Fill & Go BRITA

How do I clean the BRITA Fill & Go bottle?

Clean the bottle without the MicroDisc with mild detergent or in the dishwasher. The MicroDisc should be rinsed under warm water for 1 minute initially, then cleaned by soaking in boiling water for 5 minutes regularly.

How often should I replace the MicroDisc filter?

BRITA recommends replacing the MicroDisc every 4 weeks or after filtering 150 liters of water, whichever comes first.

Can I use the Fill & Go with hot water?

No, only use cold tap water (4 °C to 40 °C). Hot water may damage the filter and bottle.

Is the bottle dishwasher safe?

Yes, the bottle (without the MicroDisc) can be washed in the dishwasher. The MicroDisc must be cleaned by hand.

What is the MicroDisc and how does it work?

The MicroDisc is a replaceable filter that reduces chlorine, taste, odor, and particulate matter. It should be soaked in warm water for 1 minute before first use to remove carbon dust.

Can I use the Fill & Go with other liquids like juice?

No, the Fill & Go is designed for tap water only. Using other liquids may damage the filter and void the warranty.

How should I store the bottle when not in use?

Disassemble the bottle, remove the MicroDisc, and store all parts completely dry in a cool, dry place.

Is the BRITA Fill & Go BPA-free?

Yes, the bottle is made from BPA-free plastic, ensuring safe drinking water.

Where can I buy replacement MicroDiscs?

Replacement MicroDiscs are available at www.brita.net or from authorized retailers.

What should I do if I see black particles in the filtered water?

Small carbon particles may appear occasionally. Rinse the MicroDisc thoroughly on both sides. These particles are harmless.

USER MANUAL Fill & Go BRITA

I. For quality from the very start

I. For quality from the very start

II. Important Notes

ENENEN EN

II. Important Notes

1) Cleaning the bottle

Before using the fill&go for the first time, clean the bottle without the MicroDisc with a mild detergent or in the dishwasher. Clean the fill&go regularly by hand or in the dishwasher A. Before cleaning remove the MicroDisc 3 and store it on a clean surface during the cleaning process. To ensure an optimum level of hygiene, we recommend that the microdisc is not only to be used and pouring boiling water over it. In order to prepare the MicroDisc properly, ensure it is fully submerged. If the MicroDisc floats to the surface, use a spoon to hold the MicroDisc to the bottom of the cup. After five minutes, you can reinstall the MicroDisc into the water filter. Please make sure that your hands are clean when touching the

2) Preparing the MicroDisc

Take the MicroDisc out of the packaging. Before using the MicroDisc for the first time, soak the MicroDisc in warm water for 1 minute to remove any carbon dust that may be present and to optimise water flow B.

3 | English

3) Inserting the MicroDisc

Open the bottle lid 5. Unscrew disc cover 2 anti-clockwise C and insert the disc D. Then screw the disc cover back on and close the bottle lid.

4) Filling the bottle

Unscrew bottle base 4 and fill the bottle with tap water E. Then screw the base back on to the bottle. Open the lid, open the mouth piece and your fill&go is now ready to use!

5) Changing the MicroDisc

One MicroDisc can filter up to 150 litres of water. To ensure optimal filtration and hygiene, BRITA recommends the MicroDisc to be replaced every 4 weeks. To do this, repeat step 2 and 3. In some regions, the filtration of tap water containing particles can result in a significantly lower flow rate. In such cases, we recommend changing the MicroDisc more frequently.

4 | English 5 | English

Use only with cold water (4 °C to 40 °C). The fill&go may only be used with municipically treated cold tap water provided by your local water authority. This water is constantly controlled and according to legal regulations safe to drink. If an instruction is received from the authorities that mains water must be boiled, then BRITA filtered water must also be boiled. When the instruction to boil water is no longer in force, the entire bottle must be thoroughly cleaned and a new MicroDisc inserted. For certain groups of people (e.g. those with impaired immunity and babies), it is generally recommended that tap water should be boiled; this also applies to filtered water. BRITA filtered water is a foodstuff intended for human consumption; you should therefore use the water in your fill&go within one day.

When not using your fill&go for a longer period of time, the bottle should be disassembled and stored completely dry.

Always store spare MicroDiscs in a cool, dry place and ensure that they are tightly sealed.

Like each natural product, the consistency of the MicroDisc is subject to natural variances. This can lead to a light abrasion of small carbon particles in the packaging and in the filtered water. These particles have no negative health effects and are not harmful if ingested. In case you observe carbon particles, BRITA recommends rinsing the MicroDisc thoroughly on both sides.

Dispose of used MicroDiscs with your general waste. Dispose of the bottle according to local provisions.

Exclusion of liability

Please understand that BRITA cannot accept any liability on their products if given usage instructions are not followed. For more information, please visit www.brita.net

6 | English

EN

Model number

fill&go Vital pink: 1016790

fill&go Vital blue: 1017617

fill&go Vital lime: 1017609 fill&go Vital lime: 1017601

mill&go vital purple. 10/17/00

Source of supply for MicroDiscs: www.brita.net

EN

System Tested and Certified by the WQA against NSF/ANSI Standard 42 for the reduction of chlorine, taste and odor and particulate reduction. For specific details please read the Performance Data Sheet enclosed in the box.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the systems.

ES PT

BRITA Water Filter Systems Distributors Pty Ltd., Level 9, 123 Epping Road, North Ryde, NSW 2113, Australia

9

10

7

1020080-02-ELA 12/18

GB

BRITA Water Filter Systems Ltd., BRITA House, 9 Granville Way, Bicester, Oxfordshire, OX26 4JT, UK

8

BRITA

Enter Code:

FGV1512

Getting Started