SC-222 - Kettle Scarlett - Free user manual and instructions

Brand	Scarlett
Model	SC-222
Product Type	Electric Kettle
Capacity	1.7 L (Max), 0.5 L (Min)
Power Supply	220-240V, 50/60 Hz (estimated)
Power Consumption	1500 W (typical)
Dimensions	Approx. 25 x 20 x 15 cm (H x W x D)
Weight	Approx. 1.0 kg
Material	Plastic body, stainless steel heating element
Cord Length	Approx. 0.8 m (with cord storage)
Indicator Light	Yes, illuminates when heating
Automatic Shut-Off	Yes, when water boils
Boil-Dry Protection	Yes, safety system
Lid Type	Push-button release lid
Base Unit	With cord storage compartment
Usage	For water only
Cleaning Instructions	Wipe exterior with damp cloth; descale regularly
Safety Features	Do not immerse; keep base dry; close lid before use
Repairability	Refer to qualified specialist for repairs
Warranty	Standard manufacturer warranty (if applicable)

Frequently Asked Questions - SC-222 Scarlett

How to use the kettle for the first time?

Fill the kettle with cool water up to the maximum level mark and boil it. Empty the kettle and repeat the operation. The appliance is then ready for use.

What is the minimum and maximum water level?

Do not fill with less than 0.5 L (MIN mark) to prevent dry operation, and no more than 1.7 L (MAX mark) to avoid overflow during boiling.

Why does the kettle not turn on?

Ensure the kettle is properly placed on the base unit, the plug is connected, and the On/Off switch is pressed. Also check that the lid is closed correctly.

How to clean the kettle?

Clean the outside of the kettle and base unit with a soft damp cloth, then wipe dry. Do not use abrasive materials. For descaling, use special descaling agents following the instructions.

How to descale the kettle?

Regularly remove scale using special descaling agents available in stores. Follow the instructions provided with the descaling product.

Can I open the lid while water is boiling?

No. Do not open the lid while water is boiling to avoid risk of burns from steam or hot water.

What should I do if the kettle operates dry?

The kettle will automatically switch off due to the boil-dry protection. Let it cool down for 10 minutes before filling with water again.

How long should I wait before reboiling?

After automatic shut-off, the kettle can be switched on again after cooling for 15-20 seconds.

Can I use the kettle for other liquids?

No, the kettle is designed for heating water only. Do not use for other liquids or purposes.

How to store the cord?

The cord can be wound into the cord storage compartment located in the base unit to keep it tidy.

USER MANUAL SC-222 Scarlett

Line drawing of a SCARLETT water heater with handle and spout (no text or symbols on body)

www.scarlett.ru

АЯ46

002

010

GB DESCRIPTION

1. Base unit with cord storage compartment
2. Body
3. Spout
4. Lid
5. Lid release button
6. On/Off switch
7. Handle
8. Indicator light

CZ POPIS BG ОПИСАНИЕ

GB INSTRUCTION MANUAL

IMPORTANT SAFEGUARDS

• Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.
• Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
• Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
• For home use only. Do not use for industrial purposes.
  • Always unplug the appliance from the power supply when not in use.
• Keep the base unit away from water and protect from splashes.
• Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.
• Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary.
• Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.
• To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.
• Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.
• Do not leave the appliance unattended when in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.
• Never take the kettle from its base while in operation. Switch the appliance off first.
• ATTENTION: Do not open the lid while water is boiling.
• Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.
• The kettle is for heating water only, not for any other purposes and liquids.
• If the product has been exposed to temperatures below 0^ C for some time it should be kept at room temperature for at least 2 hours before turning it on
• The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

BEFORE USING FOR THE FIRST TIME

- Fill the kettle with cool water up to the maximum level mark and boil it. Empty the kettle. Repeat this operation. The appliance is ready for use.

INSTRUCTION FOR USE

FILLING

• Remove the kettle from the base unit.
• You can fill the kettle with water via the spout or neck with opened lid.
• Do not fill the kettle with less than 0.5 l of water (less than "MIN" mark) to prevent it from operating dry and more than 1.7 l (up to "MAX" mark) to avoid overfilling and water spilling out during the boiling.

SWITCHING ON

• After filling with water, place the kettle on the base unit.
- Connect the plug to the power supply and push On/Off switch. The appliance will turn on and the indicator will light.

SWITCHING OFF

• When water begins to boil, the kettle will switch off automatically and indicator light will go off.
• NOTE: This appliance has a safety system, which automatically switches heating element off if the appliance inadvertently has been switched on empty, or if it operates dry. In this case let the appliance cool down for 10 minutes before filling with water again.

SWITCHING ON AGAIN

- If the kettle has been switched off automatically, it can be switched on again after cooling for 15-20 seconds.

CARE AND CLEANING

• Open the lid and pour water out through the orifice.
• Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive materials.
• Remove scale regularly, using special descaling agents, available at the market, following given instructions.

STORAGE

- The cord could be winded into a cord storage compartment provided in the base unit.