SC-EK18P20 - Kettle Scarlett - Free user manual and instructions

Product Type	Electric Kettle
Brand	Scarlett
Model	SC-EK18P20
Capacity	1.7 Liters
Power Rating	2200 W
Voltage	220-240 V, 50/60 Hz
Dimensions (Approx.)	22 x 15 x 20 cm
Weight (Approx.)	1.0 kg
Cord Length	0.75 m
Material	Stainless Steel / Plastic
Heating Element	Concealed, Stainless Steel
Key Functions	Fast boiling, automatic shut-off, boil-dry protection
Safety Features	Cool-touch handle, lid lock, auto shut-off
Filter	Removable, washable limescale filter
Base	Swivel base 360°
Indicator Light	Power on indicator
Water Level Window	Yes, with markings
Maintenance	Descaling with vinegar or citric acid
Spare Parts Availability	Contact Scarlett service center

Frequently Asked Questions - SC-EK18P20 Scarlett

How do I descale the kettle?

To descale, fill the kettle with a mixture of water and vinegar (or citric acid) up to the maximum mark, boil, let it sit for 30 minutes, then rinse thoroughly. Repeat if necessary.

Why does the kettle turn off before boiling?

This may be due to limescale buildup. Descale the kettle as described. Also ensure the lid is closed properly and the amount of water is above the minimum level.

Can I boil milk or other liquids in the kettle?

No, this kettle is designed for boiling water only. Other liquids may damage the appliance and cause safety hazards.

What does the automatic shut-off protect against?

The automatic shut-off prevents the kettle from overheating if it boils dry or if the water has reached boiling point. It ensures safe operation.

How do I clean the filter?

The filter is removable. Press the filter release button, take it out, rinse under running water with a soft brush. Reinsert after drying.

Is the kettle cordless?

Yes, the kettle lifts off the base for cordless pouring. The base has a 360° swivel connection for easy placement.

What is the maximum capacity?

The maximum capacity is 1.7 liters. Do not fill above the max mark to avoid spillage during boiling.

Why is the kettle noisy during operation?

A slight noise during boiling is normal due to the heating element. If it is excessively loud, it may indicate limescale buildup. Descale the kettle.

Can I use the kettle with a voltage converter?

The kettle is designed for 220-240V. Using a voltage converter may cause damage. Please check your local voltage before use.

Where can I find spare parts?

Contact Scarlett customer service or visit their official website for spare parts availability. Provide your model number SC-EK18P20.

USER MANUAL SC-EK18P20 Scarlett

White and purple SCARLETT water heater with control panel (no visible text or symbols on body)

www.scarlett.ru

GB DESCRIPTION

1. Base unit with cord storage compartment
2. Body
3. Spout
4. Removable filter
5. Lid
6. Lid release button
7. On/Off switch
8. Indicator light
9. Handle
10. Two water level indicators

CZ POPIS

~ 220-240 V / 50 Hz

1850-2200 W

0.93 / 1.1 kg

mm

GB INSTRUCTION MANUAL IMPORTANT SAFEGUARDS

- Please read these operating instructions carefully before connecting your kettle to the power supply, in order to avoid damage due to incorrect use.

- Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.

- Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.

- For home use only. Do not use for industrial purposes.

- Always unplug the appliance from the power supply when not in use.

- Keep the base unit away from water and protect from splashes.

- Do not immerse the unit, cord or plug in water or other liquids. If it has happened, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.

- Do not operate the appliance if the cord or the plug is damaged or if the appliance has been otherwise damaged. In such cases take the appliance to a qualified specialist for check and repair if necessary.

- Ensure that the cord does not hang over sharp edges and keep it away from hot surfaces.

- To disconnect the appliance from the power supply pull it out by the plug only, not by the cord.

- Place the appliance on a dry stable surface, away from sources of heat (e.g. hotplates); do not place it under curtains and shelves.

- Do not leave the appliance unattended when in use.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

- Use the kettle only with the base unit supplied, and do not use the base unit for any other purposes.

- Never take the kettle from its base while in operation. Switch the appliance off first.

- ATTENTION: Do not open the lid while water is boiling.

- Close the lid properly before switching on. Otherwise, the appliance will not switch off automatically and the hot water may overflow.

- The kettle is for heating water only, not for any other purposes and liquids.

- Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center.

- If the product has been exposed to temperatures below 0^ for some time it should be kept at room temperature for at least 2 hours before turning it on

- The manufacturer reserves the right to introduce minor changes into the product design without prior notice, unless such changes influence significantly the product safety, performance, and functions.

BEFORE USING FOR THE FIRST TIME

- Fill the kettle with cool water up to the maximum level mark and boil it. Empty the kettle. Repeat this operation. The appliance is ready for use.

INSTRUCTION FOR USE

FILLING

- You can fill the kettle with water via the spout or neck with opened lid.

- Do not fill the kettle with less than 0.5 l of water (less than “MIN” mark) to prevent it from operating dry and more than 1.7 l (up to “MAX” mark) to avoid overfilling and water spilling out during the boiling.

SWITCHING ON

- After filling with water, place the kettle on the base unit.

- Connect the plug to the power supply and push On/Off switch. The appliance will turn on and the indicator will light.

SWITCHING OFF

- When water begins to boil, the kettle will switch off automatically and indicator light will go off.

- NOTE: This appliance has a safety system, which automatically switches heating element off if the appliance inadvertently has been switched on when empty, or if it operates dry. In this case let the appliance cool down for 10 minutes before filling with water again.

SWITCHING ON AGAIN

- If the kettle has been switched off automatically, it can be switched on again after cooling for 15-20 seconds.

CARE AND CLEANING

- Always remove the plug from the socket and let the appliance cool down completely.

- Clean the outside of the kettle and the base unit with a soft damp cloth, then wipe with a dry cloth. Do not use any abrasive materials.

- Remove scale regularly, using special descaling agents, available at the market, following given instructions.

FILTER CLEANING

- Remove the filter out of the kettle.

- Place it under a jet of water and rub gently with a soft brush (not included).

- Return the filter to its place.

STORAGE

- Complete all requirements of Chapter CLEANING AND CARE.

- Keep the appliance in a dry cool place.