SBS-FD-130 - Vacuum filtration device STEINBERG - Free user manual and instructions

Product Type	Vacuum Filtration Apparatus
Brand	Steinberg
Model	SBS-FD-130
Intended Use	Separation of solids and liquids under vacuum in laboratory
Fields of Application	Chemistry, biology, environment
Main Material	Borosilicate glass (glass components)
Estimated Weight	5 kg
Estimated Dimensions (L x W x H)	300 x 300 x 400 mm
Power Supply	None (passive device, requires external vacuum pump)
Maintenance	Clean with a soft damp cloth; inspect regularly
Storage	Cool, dry place, protected from dust and humidity
Safety	Use on a stable surface; wear PPE; keep out of reach of children
Spare Parts	Use only original spare parts
Repairability	Repairs by qualified personnel only
Certifications	Compliant with regulation (EU) 2023/988
Disposal	Do not dispose of with municipal waste; recycle properly

Frequently Asked Questions - SBS-FD-130 STEINBERG

What is the main use of the SBS-FD-130 device?

The SBS-FD-130 vacuum filtration apparatus is designed to separate solids from liquids in the laboratory by applying a vacuum. It is used in chemistry, biology, and environment.

What are the risks associated with using this device?

Risks include: glassware breakage (cuts), implosion under vacuum, chemical exposure (burns, poisoning), electric shock if the pump is improperly connected, and cross-contamination of samples.

How to clean the vacuum filtration apparatus?

Clean the exterior with a soft damp cloth. Do not use abrasive cleaners or solvents. For glassware, follow cleaning protocols appropriate for the chemicals used.

Can I repair the device myself?

No, only qualified persons should perform repairs. Always use original spare parts to ensure safety and proper operation.

What safety precautions should I take?

Place the device on a stable, flat surface. Wear personal protective equipment (gloves, goggles, lab coat). Work under a fume hood or in a ventilated area. Keep the device out of reach of children.

Does the device require electrical power?

The device itself is passive. It must be connected to an external vacuum pump which does require electrical power. Ensure the pump is properly grounded.

How to store the device when not in use?

Store it in a cool, dry place, protected from dust and humidity. Protect the glassware to avoid shocks.

What to do in case of glassware breakage?

Immediately stop use. Wear cut-resistant gloves to remove debris. Carefully clean the area. Replace the broken part with an original part.

Is the device suitable for use with flammable solvents?

No, use with flammable solvents may present a fire or explosion risk. Consult the manual and respect the chemical compatibilities of the glassware.

How to dispose of the device at end of life?

Do not dispose of the device with household waste. According to regulations, take it to a collection point for recycling of electrical and electronic equipment waste or follow local instructions.

USER MANUAL SBS-FD-130 STEINBERG

This User Manual has been translated using machine translation. We have made every effort to ensure the translation is accurate, but please note that automated translations are not perfect and are not meant to replace human translators. The official version of the User Manual is in English. Any differences between the translated version and the original English are not legally binding. If you have any questions about the accuracy of the translation, please refer to the English version, which is the official reference. More language versions are available upon request via [e-mail].

Safety and operation instructions

Product name: Vacuum Filtration Device

Model name: SBS-FD-130

DO NOT USE THE DEVICE UNLESS YOU HAVE THOROUGHLY READ AND UNDERSTOOD THIS USER MANUAL.

Safety Instructions

Warning: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury.

1. General Safety

○This product is intended for intended use only.
- Do not use the product for purposes other than those described in this manual.
- Keep this manual for future reference.
○ A Vacuum Filtration Device is designed for laboratory use to separate solids from liquids through the application of a vacuum. It is commonly used in chemical, biological, and environmental laboratories for tasks such as sample preparation, purification, and analysis.

2. Operation al Safety

○Use the product only on a stable, level surface e.
- Do not operate the product if it is damaged or malfunctioning.
- Keep away from children and pets.

3. Maintenance Safety

• Only qualified personnel should perform repairs.
  ○Use only original spare parts.

4. Warning Symbols

oCaution: Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.

EN

o Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

o Potential risks and hazards: Lists all risks and hazards directly or indirectly connected with the use or misuse of the product:

- Mechanical Hazards: Improper handling or assembly of the device can lead to breakage of glass components, which may cause cuts or other injuries. Always handle glassware with care and follow the manufacturer's assembly instructions.

- Vacuum Hazards: The use of vacuum pressure can pose risks such as implosion of glassware or sudden release of vacuum, which can cause injury. Ensure that all components are rated for vacuum use and inspect them regularly for damage.

- Chemical Hazards: The device is often used with hazardous chemicals that can pose risks such as burns, poisoning, or respiratory issues. Use appropriate personal protective equipment (PPE) and work in a well-ventilated area or fume hood.

- Electrical Hazards: If the vacuum pump is electrically powered, there is a risk of electrical shock or fire. Ensure that the pump is properly grounded and regularly maintained.

- Contamination Hazards: Improper cleaning and maintenance of the device can lead to cross-contamination of samples, affecting the accuracy of results. Follow proper cleaning protocols and regularly maintain the device.

Maintenance and Cleaning

1. Regular Maintenance

- Inspect the product regularly for signs of wear or damage.

○ Replace any damaged parts immediately.

2. Cleaning

- Use a soft, damp cloth to clean the exterior.

- Do not use abrasive cleaners or solvents.

3. Storage

○ Store in a cool, dry place.

- Protect from dust and moisture.

Disposal

Environmental Protection

- Do not dispose of this product as unsorted municipal waste.

EN

- By ensuring proper disposal, you help prevent potential negative consequences for the environment and human health.

Declaration of Compliance

We, expondo Polska sp. z o.o. sp. k., declare under our sole responsibility that the Vacuum Filtration Device, Model SBS-FD-130, to which this declaration relates, is in conformity with the relevant Union harmonization legislation:

• Regulation (EU) 2023/988 (General Product Safety Regulation)

Manufacturer contact

expondo Polska sp. z o.o. sp. k.

For the disposal of the device please consider and act according to the national and local rules and regulations.

CONTACT

expondo Polska sp. z o.o. sp. k.